ZipRecruiter

Log In

1

Plastic Pipe Jobs (NOW HIRING)

Laborup

Plastic Pipe-fitter / System Fabricator

Tulsa, OK · On-site

$22 - $30/hr

Overview We're hiring Plastic Piping System Fabricators for our indoor pipe-fabrication shop. You'll build prefabricated plastic piping systems like fire suppression, sprinkler, irrigation, and ...

Laborup

Plastic Pipe-fitter / System Fabricator

Tulsa, OK · On-site

$22 - $30/hr

Overview We're hiring Plastic Piping System Fabricators for our indoor pipe-fabrication shop. You'll build prefabricated plastic piping systems like fire suppression, sprinkler, irrigation, and ...

Laborup

Plastic Pipe-fitter / System Fabricator

Tulsa, OK · On-site

$22 - $30/hr

Overview We're hiring Plastic Piping System Fabricators for our indoor pipe-fabrication shop. You'll build prefabricated plastic piping systems like fire suppression, sprinkler, irrigation, and ...

Miller Pipeline

Plastic Pipe Fuser

Port Huron, MI · On-site

Install pipe into ditch. * Tie-in to live natural gas mains. * Test and tap gas services and mains. * Drive equipment to and from jobsite. * Maintain safe work environment for workers and public.

Ecolab

Plastic Pipe Cleanroom Welder/Assembler

Chandler, AZ · On-site

$27 - $29.51/hr

Join our Chandler Fab Shop team as a Plastic Pipe Cleanroom Welder/Assembler, where you will fabricate and weld high-purity thermoplastic piping systems used in controlled cleanroom environments. In ...

Miller Pipeline

Plastic Pipe Fuser

Detroit, MI

Install pipe into ditch. * Tie-in to live natural gas mains. * Test and tap gas services and mains. * Drive equipment to and from jobsite. * Maintain safe work environment for workers and public.

Miller Pipeline

Plastic Pipe Fuser

Port Huron, MI · On-site

Install pipe into ditch. * Tie-in to live natural gas mains. * Test and tap gas services and mains. * Drive equipment to and from jobsite. * Maintain safe work environment for workers and public.

Miller Pipeline

Plastic Pipe Fuser

Detroit, MI · On-site

Install pipe into ditch. * Tie-in to live natural gas mains. * Test and tap gas services and mains. * Drive equipment to and from jobsite. * Maintain safe work environment for workers and public.

Charlotte Pipe and Foundry

Pipe Trainee

Maize, KS · On-site

$21.50 - $27.50/hr

Today we manufacture the industry's broadest range of standard and specialty DWV products, including cast iron and plastic pipe and fittings. Charlotte Pipe is headquartered in Charlotte, NC, and has ...

Charlotte Pipe & Foundry Company

Pipe Trainee

Maize, KS · On-site

$21.50 - $27.50/hr

Today we manufacture the industry's broadest range of standard and specialty DWV products, including cast iron and plastic pipe and fittings. Charlotte Pipe is headquartered in Charlotte, NC, and has ...

Charlotte Pipe & Foundry Company

Pipe Trainee

Maize, KS · On-site

$21.50 - $27.50/hr

Today we manufacture the industry's broadest range of standard and specialty DWV products, including cast iron and plastic pipe and fittings. Charlotte Pipe is headquartered in Charlotte, NC, and has ...

Charlotte Pipe and Foundry

Pipe Trainee

Muncy, PA · On-site

$28.68/hr

Today we manufacture the industry's broadest range of standard and specialty DWV products, including cast iron and plastic pipe and fittings. Charlotte Pipe is headquartered in Charlotte, NC, and has ...

Team Fishel

Gas Pipe Fitter

Tucson, AZ · On-site

$23.75 - $30.50/hr

The purpose of a Poly Gas Pipe Fitter is to install Poly pipe by heat fusion of predominantly Poly & HDPE plastic pipe. Responsibilities: * Install new poly pipe. * Assist other Teammates in the ...

Charlotte Pipe & Foundry Company

Pipe Trainee

Muncy, PA · On-site

$28.68/hr

Today we manufacture the industry's broadest range of standard and specialty DWV products, including cast iron and plastic pipe and fittings. Charlotte Pipe is headquartered in Charlotte, NC, and has ...

next page

Showing results 1-20

All JobsManufacturing JobsPlastic Pipe Jobs

Plastic Pipe information

See salary details

$12

$18

$24

How much do plastic pipe jobs pay per hour?

As of Sep 3, 2026, the average hourly pay for plastic pipe in the United States is $18.30, according to ZipRecruiter salary data. Most workers in this role earn between $17.07 and $19.23 per hour, depending on experience, location, and employer.

What is a plastic pipe worker?

Plastic pipe workers are skilled tradespeople who install, assemble, and repair piping systems made from plastic materials such as PVC, CPVC, or polyethylene. Their duties include cutting, fitting, and joining plastic pipes for various applications, including plumbing, irrigation, and industrial systems. They must understand the properties of different plastics, follow blueprints or specifications, and ensure that all installations meet safety and building codes. Plastic pipe workers may work in residential, commercial, or industrial settings, and often use specialized tools for cutting and joining plastic pipes. Attention to detail and knowledge of proper installation techniques are essential for this role.

What are the key skills and qualifications needed to thrive as a plastic pipe fitter?

To thrive as a Plastic Pipe Fitter, you need knowledge of plumbing systems, pipe installation techniques, and a high school diploma or equivalent. Familiarity with tools such as pipe cutters, welding equipment, and adherence to safety standards are typically required, and some employers may prefer certification from organizations like the NCCER. Attention to detail, problem-solving ability, and effective teamwork are important soft skills in this role. These skills ensure the proper installation and maintenance of plastic piping systems, which are critical for the safe and efficient operation of water, gas, and waste systems.

What is the difference between Plastic Pipe vs Plastic Pipe Fitter?

AspectPlastic PipePlastic Pipe Fitter
CertificationsNone required, but knowledge of plumbing codes helpfulOften requires plumbing or pipefitting certifications
Work EnvironmentManufacturing plants, construction sites, plumbing installationsConstruction sites, industrial facilities, plumbing projects
Job RoleMaterial used in piping systemsInstall, assemble, and repair plastic piping systems

Plastic Pipe refers to the raw material used in piping systems, while Plastic Pipe Fitter specializes in installing and maintaining these systems. The fitter's role involves hands-on work with plastic pipes, often requiring specific certifications and practical skills. Both roles are essential in plumbing and construction industries, but they focus on different aspects of plastic piping systems.

More about Plastic Pipe jobs

What cities are hiring for Plastic Pipe jobs?

Cities with the most Plastic Pipe job openings:

What states have the most Plastic Pipe jobs?

States with the most job openings for Plastic Pipe jobs include:

What job categories do people searching Plastic Pipe jobs look for?

The top searched job categories for Plastic Pipe jobs are:

Plastic Pipe jobs near you
Infographic showing various Plastic Pipe job openings in the United States as of August 2026, with employment types broken down into 1% As Needed, 92% Full Time, 5% Part Time, 1% Contract, and 1% Nights. Highlights an 97% Physical, 1% Hybrid, and 2% Remote job distribution, with an average salary of $38,073 per year, or $18.3 per hour.

Plastic Pipe-fitter / System Fabricator

Laborup

Tulsa, OK • On-site

$22 - $30/hr

Full-time

Re-posted 12 days ago

Job description

Overview

We're hiring Plastic Piping System Fabricators for our indoor pipe-fabrication shop.

You'll build prefabricated plastic piping systems like fire suppression, sprinkler, irrigation, and industrial process lines, that ship out and install elsewhere. Working from blueprints and 3D layouts, you'll measure and cut HDPE, PVC, and other thermoplastic pipe, face and align the ends, then run butt, socket, and sidewall fusion equipment — watching temperature, pressure, and cycle time to make each joint leak-free. You'll take precise readings along the way to confirm every assembly is built to spec.

This is a growing line of business, fused plastic systems that can replace metal piping in commercial buildings. Everything is built in a clean, climate-controlled facility, then shipped to the job site.

Why Join Us

  • Indoor, climate-controlled work: Build in a clean shop, not on job sites.
  • Learn a rare skill: Train on fusion processes used across the piping industry.
  • Great culture: Work at an award-winning company with a team that invests in your growth.

Compensation

  • Pay: $22–30/hour, depending on experience.

Shifts

  • 1st shift: Monday–Thursday, 6:00 AM – 4:30 PM (four 10-hour days).

Responsibilities

  • Cut & prep: Measure, cut, clean, and prep pipe and fittings.
  • Face & align: Face and align pipe ends to fusion standards.
  • Verify specs: Confirm material type and dimensions before every assembly.
  • Run fusion equipment: Set up and operate machines for each joint.
  • Control the cycle: Monitor temperature, pressure, and cycle time per joint.
  • Make the joint: Fuse pipe into strong, leak-free connections.
  • Build to print: Assemble systems to match blueprints and 3D layouts.
  • Check quality: Take precise readings and flag joints that fail spe

Requirements

Qualifications

Required

  • Strong mechanical aptitude and hand skills.
  • Able to read blueprints and 3D layouts.
  • Accurate measuring, cutting, and layout work.
  • Commitment to precise, reliable work.
  • Willingness to learn fusion processes.
  • Attention to detail on every joint.

Preferred

  • Experience building prefabricated piping systems.
  • Background as a pipefitter or fitter.
  • Fire suppression or sprinkler system experience.
  • Experience with fusible plastic pipe.
  • Prior experience running fusion equipment.
  • Familiarity with HDPE or thermoplastic pipe.