ZipRecruiter

Log In

2

Part Time Biw Welding Fixture Design Jobs (NOW HIRING)

Cincinnati State

Adjunct - Welding

Cincinnati, OH · On-site

$700/wk

Design, administer, and grade examinations to assess achievement of course objectives as identified ... Non-Exempt Status: Part time Candidate notification: Please note that due to the high volume of ...

Cscc

Adjunct - Welding

Columbus, OH · On-site

$56.88/hr

Considers individual differences of students in order to design and support a range of appropriate ... Maximum of 12 contact hours per week Full Time/Part Time: Part time

Amarillo College

Adjunct Faculty - Welding

Amarillo, TX · On-site

Amarillo, TX Job Type: Part-Time Job Number: 202400666 Division: Precision Metalworking Technology ... Design and implement assessments to measure student learning outcomes. * Maintain accurate and ...

next page

Showing results 1-20

All JobsBiw Welding Fixture Design JobsPart Time Biw Welding Fixture Design Jobs

Part Time Biw Welding Fixture Design information

See salary details

$24

$41

$56

How much do part time biw welding fixture design jobs pay per hour?

As of Jun 14, 2026, the average hourly pay for part time biw welding fixture design in the United States is $41.61, according to ZipRecruiter salary data. Most workers in this role earn between $34.38 and $47.36 per hour, depending on experience, location, and employer.

What are the key skills and qualifications needed to thrive as a Part Time BIW Welding Fixture Designer, and why are they important?

To thrive as a Part Time BIW (Body-in-White) Welding Fixture Designer, you need a solid background in mechanical engineering, CAD design, and knowledge of automotive manufacturing processes, often supported by a relevant degree or diploma. Proficiency in CAD software such as CATIA, SolidWorks, or NX, and familiarity with PLM systems and GD&T standards, is typically required. Strong problem-solving abilities, attention to detail, and effective communication skills help in collaborating with cross-functional teams and addressing design challenges efficiently. These skills and qualifications are crucial for creating precise, manufacturable fixtures that ensure high-quality, efficient production in automotive assembly lines.

What is the difference between Part Time Biw Welding Fixture Design vs Part Time Welding Engineer?

AspectPart Time Biw Welding Fixture DesignPart Time Welding Engineer
CredentialsTechnical certifications in fixture design, welding processesEngineering degree, welding certifications
Work EnvironmentManufacturing plants, workshop settingsIndustrial facilities, project sites
Industry UsageAutomotive, manufacturingAutomotive, aerospace, manufacturing
Job FocusDesigning fixtures for welding processesPlanning, overseeing welding procedures

Part Time Biw Welding Fixture Design primarily involves creating fixtures to support welding operations, focusing on design and precision. In contrast, Part Time Welding Engineers oversee welding processes, ensuring quality and compliance. Both roles require technical knowledge, but fixture designers focus on tooling, while welding engineers handle process management.

What is a Part Time BIW Welding Fixture Designer?

A Part Time BIW (Body-in-White) Welding Fixture Designer is a professional who creates and develops fixtures used to hold and position automotive body components during the welding process. Working part-time, they use CAD software to design jigs and fixtures that ensure precise alignment and stability of metal parts, which is essential for quality and safety in vehicle manufacturing. Their role often involves collaborating with manufacturing engineers and production teams to optimize designs for efficiency and cost-effectiveness, while ensuring the fixtures meet industry standards.

What are some common challenges faced by part-time BIW Welding Fixture Designers, and how can they be addressed?

Part-time BIW (Body-in-White) Welding Fixture Designers often face challenges such as tight project deadlines, ensuring fixture accuracy with limited on-site time, and maintaining clear communication with full-time engineering teams. To address these challenges, it's important to prioritize strong organizational skills, use collaborative design tools for seamless updates, and proactively schedule regular check-ins with project leads. Staying adaptable and leveraging digital platforms can help ensure your contributions integrate smoothly with the broader team's workflow.
More about Part Time Biw Welding Fixture Design jobs
What cities are hiring for Part Time Biw Welding Fixture Design jobs? Cities with the most Part Time Biw Welding Fixture Design job openings:
What are the most commonly searched types of Biw Welding Fixture Design jobs? The most popular types of Biw Welding Fixture Design jobs are:
What job categories do people searching Part Time Biw Welding Fixture Design jobs look for? The top searched job categories for Part Time Biw Welding Fixture Design jobs are:
Part Time Biw Welding Fixture Design jobs near you
Infographic showing various Part Time Biw Welding Fixture Design job openings in the United States as of June 2026, with employment types broken down into 2% As Needed, and 98% Part Time. Highlights an 86% Physical, 4% Hybrid, and 10% Remote job distribution, with an average salary of $86,554 per year, or $41.6 per hour.

Adjunct - Welding

Cincinnati State

Cincinnati, OH • On-site

$700/wk

Part-time

Posted yesterday

Job description

Adjunct - Welding
This posting is part of an ongoing recruitment effort. Applications are accepted year-round, and qualified candidates will be contacted as positions become available.
The Engineering & Information Technologies Department at Cincinnati State Technical and Community College is seeking applicants for adjunct position in the Welding Technology department.
Duties:
Classroom and laboratory instruction for the following courses:
  • Shielded Metal Arc Welding (SMAW)
  • Gas Metal Arc Welding (GMAW)
  • Gas Tungsten Arc Welding (GTAW)
  • Flux Core Arc Welding (FCAW)
  • Welding inspection
  • Print reading
  • Plasma cutting

Adjunct Faculty Essential Responsibilities:
  • Deliver learning-centered instruction by establishing a classroom environment conducive to learning and student involvement as well as effectively planning and preparing for classes and student success.
  • Adequately prepare all course materials and lessons. Note preparation time will vary based on instructor experience in teaching that course
  • Provide each student with clear course expectations, evaluations and timelines through carefully written topical outlines and approved, standardized syllabus
  • Provide Interesting and relevant assignments for students that demonstrate learning outcomes in a real-life setting
  • Suitably challenge, engage, serve and communicate with students to encourage their participation and learning while maintaining mutual value and respect
  • Complete grade books, final grade sheets, learning assessments and final exam assessments on a timely basis
  • Ensure course and program learning outcomes are delivered as defined by the syllabus.
  • Maintain a paper or electronic record (i.e., spreadsheet or grade book) of each student's progress and has it available upon request by students and/or appropriate College personnel.
  • Facilitates meaningful learning of the course competencies in the curriculum and proactively supports all facets of the learning environment. .
  • Promote student success by showing flexibility in style and work schedule as well as exhibiting a passion for teaching and students and engaging students in the learning process.
  • Design, administer, and grade examinations to assess achievement of course objectives as identified in the syllabus and as approved by the Academic Dean.
  • Complete as directed all end of term responsibilities, including submission of final grades, copies of exams, attendance records, and all other designated materials to the Academic Office.
  • Consult with the academic area chair or other appropriate College personnel on questions or issues involving course curricula, instructional strategies, and College policies and procedures.
  • Respond to requests (e.g., from students, academic area chairs, department heads, committee chairs, Records Office) in a timely and thorough manner.

Minimum Qualifications:
  • Associate's Degree from a regionally accredited institution in Welding Engineering Technology or AWS certification.
  • Three (3) or more years of industry experience in welding, instruction of welding, or metal fabrication.
  • Some night or weekend hours may be required.

Preferred Qualifications
  • CWE or CWI credential and competence in advanced welding materials and practices.
  • Associate's Degree from regionally accredited institution in Welding Engineering Technology, Mechanical Engineering Technology or Manufacturing Engineering Technology.
  • Experience in the development of a Certified Welding Program and coursework with SME's focus groups, and in an academic environment.
  • Desired Competencies
  • Ability to work with a diverse group of students in classroom and laboratories.
  • Ability to work in a team atmosphere in program and curriculum development.
  • Excellent communication skills.
  • Willingness to develop, continually evaluate, maintain, and refine curriculum to meet
  • AWS standards.
  • Willingness to participate in professional development to attain and upgrade skills.
  • Computer skills, ability to multitask, and organizational skills
  • Ability to interact successfully with academic as well as business and regulatory personnel.

Details
Position Available: Varies by semester
Compensation: $700.00 per lecture hour for new adjuncts
Contractual Affiliation: N/A
Exempt Classification: Non-Exempt
Status: Part time
Candidate notification: Please note that due to the high volume of candidates applying for adjunct positions, we will only follow up with candidates who are being considered for an interview. Please be assured that we will keep your resume on file.
Cincinnati State is an E-Verify employer:
  • If you're hired, you must complete a Form I-9, which verifies your identity and your legal right to work in the U.S.
  • You'll need to provide original, acceptable documents-no photocopies-to complete the I-9 process.
  • A list of acceptable documents can be seen here: USCIS I-9 website

STATEMENT OF COMMITMENT
  1. The institution declares that it will educate students by means of free, open, and rigorous intellectual inquiry to seek the truth.
  2. The institution declares that its duty is to equip students with the opportunity to develop the intellectual skills they need to reach their own, informed conclusions.
  3. The institution declares its commitment to not requiring, favoring, disfavoring, or prohibiting speech or lawful assembly.
  4. The institution declares it is committed to create a community dedicated to an ethic of civil and free inquiry, which respects the autonomy of each member, supports individual capacities for growth, and tolerates the differences in opinion that naturally occur in a public higher education community.
  5. The institution declares that its duty is to treat all faculty, staff, and students as individuals, to hold them to equal standards, and to provide them equality of opportunity, with regard to those individuals' race, ethnicity, religion, sex, sexual orientation, gender identity, or gender expression.

Apply