ZipRecruiter

Log In

1

Overnight Second In Command Pilot Jobs in Arizona

Imh

Fixed Wing Pilot in Command

Page, AZ · On-site

As a Mentor Pilot acting under the Company Pilot Development Program, acts as a mentor and resource for Second-in-Command Pilots employed by the company, and will complete all training and ...

New

Imh

Rotor Wing Pilot in Command

Page, AZ · On-site

$46.24 - $72.80/hr

As an Air Ambulance Pilot, you are the critical link in delivering rapid, life-saving ... Current FAA Second-Class Medical Certificate (or higher) * Flight Experience: * 2,500 hours of ...

TSMG

Remote Pilot in Command (RPIC)

Phoenix, AZ · Remote

FAA Part 107 Remote Pilot Certificate * Experience with commercial UAS operations * Strong understanding of airspace, safety, and operational procedures * Experience in BVLOS, logistics, delivery ...

TSMG

Remote Pilot in Command (RPIC)

Phoenix, AZ · Remote

FAA Part 107 Remote Pilot Certificate * Experience with commercial UAS operations * Strong understanding of airspace, safety, and operational procedures * Experience in BVLOS, logistics, delivery ...

Joby Aviation

Flight Research Remote Pilot

Yuma, AZ · Remote

$91K - $125K/yr

Act as the remote pilot in command for various R&D aircraft platforms * Conduct preflight planning and inspections of the system * Support test planning and take part in test rehearsals * Post flight ...

Jet Linx Aviation

PIC - Citation XLS/XLS+

Scottsdale, AZ · On-site

$145K - $200K/yr

Pilot in Command - Citation XLS Full-Time - Scottsdale, AZ Jet Linx is seeking qualified Pilot in Command candidates for our Midsize jet aircraft for Part 91 and 135 flight operations. It is expected ...

Jet Linx Aviation

PIC - Citation XLS/XLS+

Scottsdale, AZ · On-site

$145K - $200K/yr

Description Pilot in Command - Citation XLS/XLS+ Full-Time - Scottsdale, AZ Jet Linx is seeking qualified Pilot in Command candidates for our Midsize jet aircraft for Part 91 and 135 flight ...

next page

Showing results 1-20

All JobsSecond In Command Pilot JobsOvernight Second In Command Pilot JobsOvernight Second In Command Pilot Jobs in Arizona

Overnight Second In Command Pilot information

What is the difference between Overnight Second In Command Pilot vs Flight Instructor?

AspectOvernight Second In Command PilotFlight Instructor
Required CertificationsCommercial Pilot License, Second-in-Command (SIC) endorsementCertified Flight Instructor (CFI) certificate, Commercial Pilot License
Work EnvironmentAirline or charter flights, often overnight, in commercial aircraftFlight training environments, flight schools, one-on-one instruction
Employer & Industry UsageAirlines, charter companies, corporate flight departmentsFlight schools, aviation training organizations

The Overnight Second In Command Pilot primarily assists the captain on commercial flights, often overnight, requiring a commercial license and SIC endorsement. In contrast, a Flight Instructor focuses on training new pilots, holding a CFI certificate. While both roles involve flying and require similar certifications, the Second In Command Pilot works in a commercial airline environment, whereas Flight Instructors work mainly in training settings. The choice depends on whether you prefer operational flying in the airline industry or instructing aspiring pilots.

What are the most commonly searched types of Second In Command Pilot jobs in Arizona? The most popular types of Second In Command Pilot jobs in Arizona are:
Overnight Second In Command Pilot jobs near you

Second in Command

FlightSafety International

Tucson, AZ • On-site

Other

Posted 5 days ago

FlightSafety International rating

8.9

Company rating: 8.9 out of 10

Based on 8 frontline employees who took The Breakroom Quiz

8th of 221 rated education and training

Job description

About FlightSafety International

FlightSafety International is the world's premier professional aviation training company and supplier of flight simulators, visual systems and displays to commercial, government and military organizations. The company provides training for pilots, technicians and other aviation professionals from 167 countries and independent territories. FlightSafety operates the world's largest fleet of advanced full-flight simulators and award-winning maintenance training at Learning Centers and training locations in the United States, Canada, France and the United Kingdom.

Purpose of Position

The Simulator Second in Command is responsible for maintaining currency in assigned programs in order to act as "Second-In-Command" for both internal and external Customer Pilots for Recurrent, Initial or generic training courses within the established training curriculum, by performing the following duties:

Tasks and Responsibilities

Act as Second-in-Command (SIC) for clients training in multi-crew aircraft who have come to training without a flying partner. In that capacity, will serve as a competent Second-in-Command and will not be performing instructional duties.

Maintain SIC pilot qualification in accordance with the requirements of the programs to which he or she is assigned.

Maintain SIC qualification in accordance with FlightSafety International's Quality Management Systems (QMS) processes and procedures.

Keep current all certificates, ratings and designations required to perform duties as an SIC.

Act as SIC in various types of aircraft for Part 142, Part 135, and non-FAA clients as required.

Minimum Education
  • High school diploma or Certificate of High School Equivalency (G.E.D. - demonstrated satisfactory performance in the General Educational Development Testing Program) with two to three (2-3) years' related experience and/or training; or equivalent combination of education and experience.
Minimum Experience

Prior to SIC duties: the applicant for SIC must have the following certificates in his/her possession prior to the start of an assignment as an SIC;

Commercial Pilot Certificate with appropriate category, class and instrument

ratings; minimum of 450 hours

Knowledge, Skills, Abilities
  • Fluency in English, through both verbal and written communications; able to speak, understand, read and write
  • Excellent cockpit verbal communication skills
  • Ability to interact with various Customers in a professional manner
  • Ability to adapt to changing schedules and high-pressure situations
  • A second language may be required in some Learning Centers to meet particular needs.
Physical Demands and Work Environment

While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; and talk or hear. The employee may be required to stand; walk; sit; climb or balance; stoop, kneel, crouch, or crawl; and taste or smell.

Must possess physical range of body motion to perform the following:

1. Reach, exert pressure and manipulate the rudder controls and/or anti-torque with both feet.

2. Reach and manipulate numerous controls within the Simulator device.

3. Enter and exit from the Simulator device via the provided ramp.

4. Exit from malfunctioned Simulator while the device is in a severely pitched attitude.

Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.

The employee must regularly lift and/or move up to 10 pounds, and frequently lift and/or move up to 25 pounds.

While performing the duties of this job, the employee frequently works near moving mechanical parts. The employee occasionally works in high, precarious places and in outside weather conditions and is occasionally exposed to wet and/or humid conditions, fumes or airborne particles, toxic or caustic chemicals, extreme cold, extreme heat, risk of electrical shock, risk of radiation, and vibration.

The noise level in the work environment is usually moderate.

FlightSafety is an Equal Opportunity Employer/Vet/Disabled. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or disability.

Any offer of employment is contingent upon successful completion of required compliance reviews, including verification that the candidate is not prohibited from employment under U.S. economic sanctions programs administered by the U.S. Department of the Treasury's Office of Foreign Assets Control (OFAC).

This position may require access to export-controlled technology or services subject to the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR). Employment consideration and any offer of employment are contingent upon the applicant's ability to comply with these requirements, including qualifying as a "U.S. Person" under applicable regulations or otherwise eligible for export authorization within a timeframe consistent with business needs. A "U.S. Person" includes U.S. citizens, lawful permanent residents (holders of approved and unexpired green cards), and certain refugees or asylees with protected status under U.S. law.

This position may also require eligibility to obtain and maintain a U.S. Government security clearance for the duration of employment.

Cybersecurity Notice: All official recruiting communication from FlightSafety International will come from an @flightsafety.com email address.  FlightSafety International will never ask for personal or financial information through social media or third-party email providers.

What FlightSafety International employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply