ZipRecruiter

Log In

1

Optical Lab Jobs in Kentucky (NOW HIRING)

Essilor

LensCrafters - Apprentice Optician

Lexington, KY · On-site

$14.50 - $18.75/hr

Because continuing our legacy of the highest optical standards helps us innovate the future in ... Demonstrates safe work practices including the wearing of personal protection equipment in the lab.

Essilor

LensCrafters - Apprentice Optician

Florence, KY · On-site

$17 - $22/hr

Because continuing our legacy of the highest optical standards helps us innovate the future in ... Demonstrates safe work practices including the wearing of personal protection equipment in the lab.

Now Optics

Doctor's Technician

Bowling Green, KY · On-site

At Stanton Optical our Doctor's Technicians carefully orchestrate an efficient flow and transition ... Ensure brand standards are met in the lab area, and notify management of equipment malfunctions ...

Now Optics

Doctor's Technician

Bowling Green, KY · On-site

At Stanton Optical our Doctors Technicians carefully orchestrate an efficient flow and transition ... Ensure brand standards are met in the lab area, and notify management of equipment malfunctions ...

next page

Showing results 1-20

All JobsOptical Lab JobsOptical Lab Jobs in Kentucky

Optical Lab information

See Kentucky salary details

$10

$18

$48

How much do optical lab jobs pay per hour?

As of Jul 2, 2026, the average hourly pay for optical lab in Kentucky is $18.94, according to ZipRecruiter salary data. Most workers in this role earn between $13.37 and $17.93 per hour, depending on experience, location, and employer.

What are the key skills and qualifications needed to thrive as an Optical Lab Technician, and why are they important?

To thrive as an Optical Lab Technician, you need a solid understanding of lens fabrication, optical measurements, and quality control, typically supported by a high school diploma or technical training in optics. Familiarity with lens edgers, surfacing machines, and digital measurement systems is essential, and certifications from organizations like the American Board of Opticianry (ABO) can be beneficial. Attention to detail, manual dexterity, and strong problem-solving skills help ensure precision and efficiency in daily tasks. These skills are critical for producing high-quality eyewear that meets both industry standards and customer needs.

What is the difference between Optical Lab vs Optical Technician?

AspectOptical LabOptical Technician
CredentialsHigh school diploma, training in lens fabricationHigh school diploma, certification often preferred
Work EnvironmentManufacturing setting, working with lens equipmentRetail or clinical setting, assisting with eyewear fitting
Job FocusFabricating and finishing lensesAssisting with eyewear adjustments and measurements

Optical Lab and Optical Technician roles are related but distinct. The Optical Lab primarily focuses on lens fabrication and finishing in a manufacturing environment, requiring specialized skills and equipment. In contrast, Optical Technicians often work directly with customers or in retail settings, assisting with eyewear fitting and adjustments. Both roles require knowledge of optics but differ in daily tasks and work settings.

What are some common challenges faced by professionals working in an Optical Lab and how can they be addressed?

Professionals in an Optical Lab often encounter challenges such as maintaining precise quality control, managing high volumes of orders, and adapting to rapidly evolving lens technologies. Attention to detail is crucial, as even small errors can impact a patient's vision and satisfaction. To address these challenges, it’s important to follow strict standard operating procedures, utilize continuous training on new equipment, and foster strong communication with optometrists and sales teams to ensure accuracy and timely delivery.

What is an optical lab?

An optical lab is a specialized facility where prescription eyeglasses, contact lenses, and other optical devices are manufactured and assembled. These labs use advanced machinery and skilled technicians to cut, grind, and coat lenses according to a patient's prescription. Optical labs also fit lenses into frames, check for quality, and ensure that each pair of glasses meets the required standards for vision correction and safety.
What are the most commonly searched types of Optical Lab jobs in Kentucky? The most popular types of Optical Lab jobs in Kentucky are:
What are popular job titles related to Optical Lab jobs in Kentucky? For Optical Lab jobs in Kentucky, the most frequently searched job titles are:
What job categories do people searching Optical Lab jobs in Kentucky look for? The top searched job categories for Optical Lab jobs in Kentucky are:
What cities in Kentucky are hiring for Optical Lab jobs? Cities in Kentucky with the most Optical Lab job openings:
Optical Lab jobs near you
Infographic showing various Optical Lab job openings in Kentucky as of June 2026, with employment types broken down into 1% Locum Tenens, 32% Full Time, 29% Part Time, 1% Temporary, 36% Contract, and 1% Nights. Highlights an 97% Physical, 1% Hybrid, and 2% Remote job distribution, with an average salary of $39,387 per year, or $18.9 per hour.
Senior Manufacturing Maintenance Technician (M-F 9:30pm-6:00am)

Senior Manufacturing Maintenance Technician (M-F 9:30pm-6:00am)

ABB Optical Group

Erlanger, KY • On-site

$18 - $26.62/hr

Full-time, Part-time

Medical, Dental, Vision, Life, Retirement, PTO

Posted 5 days ago

ABB Optical Group rating

7.2

Company rating: 7.2 out of 10

Based on 16 frontline employees who took The Breakroom Quiz

Job description

Senior Maintenance Technician (Monday-Friday 9:30pm-6:00am)
JOB SUMMARY AND OBJECTIVE
The Sr Maintenance Technician is the Subject Matter Expert (SME) and has in depth knowledge of all facility departments, but will most likely specialize in a particular department. The Sr Maintenance Technician is responsible for the timely, efficient, and accurate preventive maintenance and / or repair of all machines and equipment with the ability to perform in all areas of their job duties as listed below under Essential Functions. The Sr Maintenance Technician will use the Maintenance Management System to prioritize and complete maintenance work orders as well as scheduled preventive maintenance. The Sr Maintenance Technician must be able to work independently and will be expected to communicate with vendors when vendor support for troubleshooting is required. The Sr Maintenance Technician will also assist in training newly assigned Maintenance Technicians, and be able to attend required training which may be held both in-house and off site.
ESSENTIAL FUNCTIONS
  • Effectively communicate verbally and in writing with management about technical details, questions, and ideas
  • Notify Supervisor or Manager in a timely manner of observed or reported machine and / or technical problems
  • Understand the workflow concept of the entire Lab operations
  • Operate equipment without supervision to include but not limited to air compressors, blockers, polishers, generators, engravers, non-dip backside coaters and Microsoft windows-based computers
  • Calibrate and put into operation above listed equipment without supervision
  • Perform basic and advanced troubleshooting and repairs using exploded drawings and machine schematics, as well as train others on advanced troubleshooting and repairs all without supervision on the above listed equipment and other equipment and devices as needed
  • Perform routine, scheduled and emergency maintenance primarily without supervision on all above listed equipment and other equipment and devices as needed
  • Follow approved safety instructions, practices, and procedures
  • Maintain lines of communication with Supervisor and / or Manager using valid email address and current phone number
  • Ability to work extended / overtime hours as business needs dictate
  • Other duties as assigned

SUPERVISOR RESPONSIBILITIES
None
QUALIFICATIONS
Required Qualifications
  • Minimum of a high school diploma or equivalent
  • One (1) year ans six (6) months experience to include six (6) months of optical manufacturing experience and one (1) year of optical manufacturing maintenance experience, OR one (1) year and six (6) months of prior equipment maintenance experience in a technical or manufacturing environment as determined relevant by management
  • Must be able to communicate effectively orally and in writing in English

Desired Qualifications
  • Training in industrial maintenance at a technical school
  • Prior maintenance experience in an optical manufacturing lab

PHYSICAL DEMANDS
While performing the duties of this job, the employee is frequently required to sit, stand, walk, bend, and use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; talk and hear. The employee must occasionally lift and/or move up to 50 pounds. Specific vision, color vision, peripheral vision, depth perception and the ability to adjust focus is required.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work is predominately conducted indoors and may occasionally be conducted outdoors with varying environmental conditions. Noise level is usually moderate.
For US Candidates
The anticipated base pay range for this position is Depending on experience.
Employee pay is determined by multiple factors, including geography, experience, qualifications, skills, and local minimum wage requirements. In addition, you may also be offered a competitive bonus and/or commission plan.
Full-time employees and/or their eligible dependents may be eligible to participate in the following Company-sponsored employee benefit programs: medical, dental, vision, life insurance, group life insurance, voluntary supplemental life insurance, supplemental health benefits (critical illness, hospital, accident), short- and long-term disability, paid family leave (applicable states), 401k, tuition reimbursement, and eyewear discounts.
Part-time employees do not receive benefits.
US full-time employees are eligible for the following time-off benefits:
1. Vacation and/or Sick time
2. Holiday pay
3. Birthday PTO
Upon request and consistent with applicable laws, ABB Optical will provide reasonable accommodations to individuals with disabilities who need assistance in the application and hiring process. To request a reasonable accommodation (please provide your name and contact information so that we may follow up in a timely manner), email HR@abboptical.com.
ABB Optical is an Affirmative Action and Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, or protected veteran status and will not be discriminated against on the basis of disability.
The compensation and benefits information set forth in this posting applies to candidates hired in the United States. Candidates hired outside the United States will be eligible for compensation and benefits in accordance with their local market.
ABB031

What ABB Optical Group employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply