ZipRecruiter

Log In

1

Occupancy Inspector Jobs in Michigan (NOW HIRING)

Project Solutions Inc

Concrete Inspector

Petoskey, MI · On-site

$85 - $115/hr

Review and enforce EM 385-1-1 Safety and Occupational Health requirements onsite as applicable ... Perform daily field inspections before, during, and after concrete placement, including inspection ...

Project Solutions Inc.

Concrete Inspector

Petoskey, MI · On-site

Review and enforce EM 385-1-1 Safety and Occupational Health requirements onsite as applicable ... Perform daily field inspections before, during, and after concrete placement, including inspection ...

Project Solutions Inc.

Concrete Inspector

Petoskey, MI · On-site

Review and enforce EM 385-1-1 Safety and Occupational Health requirements onsite as applicable ... Perform daily field inspections before, during, and after concrete placement, including inspection ...

Camp Dearborn

BUILDING INSPECTOR (LICENSED)

Dearborn, MI · On-site

$77K - $108K/yr

BUILDING INSPECTOR (LICENSED) SALARY : Minimum: $77,040.00 Maximum: $108,086.00 **Position will ... denies re-occupancy of properties; prepares suggestions for resolving non-compliance issues.

FAR Inspections

Independent Vacancy Scout

Bad Axe, MI · On-site

$25 - $35/hr

As a Field Inspector covering Huron County, you will perform residential occupancy verifications. These are brief, exterior visits to confirm property status and report on general conditions.

previous pagenext page

Showing results 21-40

All JobsOccupancy Inspector JobsOccupancy Inspector Jobs in Michigan

Occupancy Inspector information

What is an occupancy inspector?

An Occupancy Inspector is responsible for inspecting properties to verify occupancy status and assess their condition. They often work for mortgage companies, banks, or property management firms to ensure properties are maintained and comply with regulations. Inspectors document findings through photos and reports, noting any damages, code violations, or signs of abandonment. This role typically involves frequent travel and requires attention to detail and strong observational skills.

What does an occupancy inspector do?

A typical day for an Occupancy Inspector involves visiting various residential, commercial, or public properties to perform site inspections, verify compliance with local occupancy codes, and document any findings in detailed reports. Inspectors often coordinate with property owners, building managers, or local authorities to schedule inspections and follow up on corrective actions where violations are found. Much of the work involves being on-site, though some administrative time is spent reviewing plans and preparing inspection documentation. The role requires adaptability and a willingness to travel within the assigned jurisdiction.

What are the key skills and qualifications needed to thrive as an occupancy inspector?

To thrive as an Occupancy Inspector, you need strong attention to detail, knowledge of building codes and occupancy regulations, and typically a background in construction, property management, or code enforcement. Familiarity with inspection tools, reporting software, and, in some jurisdictions, relevant certifications (such as ICC certification or local licensing) is often required. Strong communication, problem-solving abilities, and customer service skills help inspectors effectively interact with property owners and municipal officials. These combined skills ensure accurate occupancy assessments, regulatory compliance, and constructive relationships with stakeholders.

What are the most commonly searched types of Occupancy Inspector jobs in Michigan?

The most popular types of Occupancy Inspector jobs in Michigan are:

What are popular job titles related to Occupancy Inspector jobs in Michigan?

For Occupancy Inspector jobs in Michigan, the most frequently searched job titles are:

What job categories do people searching Occupancy Inspector jobs in Michigan look for?

The top searched job categories for Occupancy Inspector jobs in Michigan are:

What cities in Michigan are hiring for Occupancy Inspector jobs?

Cities in Michigan with the most Occupancy Inspector job openings:

Occupancy Inspector jobs near you
Infographic showing various Occupancy Inspector job openings in Michigan as of August 2026, with employment types broken down into 61% Full Time, 31% Part Time, and 8% Contract. Highlights an 100% In-person job distribution.

Quality Inspector

Target Metal Blanking

New Boston, MI

Full-time

Re-posted 25 days ago

Target Metal Blanking rating

2.8

Company rating: 2.8 out of 10

Based on 6 frontline employees who took The Breakroom Quiz

Job description

The Quality Inspector is responsible for ensuring that steel products processed at the facility meet specified quality standards and customer requirements. This role involves conducting inspections, testing materials, monitoring production processes, and documenting results to maintain compliance with industry standards, customer requirements, and internal quality policies.

 

Core Activities:

    1. In Process Inspection and Reports:

                                          i.        Perform first/last hit inspection. When not available the operator / supervisor will step in.

                                        ii.        100% visual inspection of all material at the Inspection Stand.

    1. Report findings during inspection:

                                          i.        Report to the Press Operator all defects that are being rejected, and for what reasons.

                                        ii.        Report to the supervisor any defects that would cause a coil to be rejected.

    1. Reports:

                                          i.        All hold for inspection or rework material.

                                        ii.        Provide samples and photographs and put into MIS.

                                       iii.        Communicate quality issues to management and supervisors

    1. Gamma Reports:

                                          i.        File charts and histograms.

    1. Additional Functions:

                                          i.        Assist Piler Operators between coils.

                                        ii.        Weekly cleaning of all gauges and fixtures.

                                       iii.        Ensure proper function of measurement equipment.

                                       iv.        Assist Press Operators when needed or requested.

                                        v.        Provide a detailed pass down to the next quality Inspector.

                                       vi.        Complete projects as assigned.

    1. Has the authority to stop production if necessary to correct quality or safety problems.

g.    Aid in disposition of material (hold for rework, claim, hold for re-inspection).

    1. Institute rework process.
    2. Dock audits
    3. Modify or create BQIR’S and RSP’S
    4. Make visual aids for the plant.
    5. Internal audits for ISO14001 and IATF16949 report findings to Quality manager.
    6. Complete all daily checklists.
    7. Collect Data for SPC.
    8. Creation of quality alerts and training.
    9. Adhere to safety protocols while performing duties.
  1. Knowledge, Skills, Abilities:
    1. Ability to adhere to general office procedures (i.e. protocol, professionalism, punctuality, etc.).
    2. Ability to operate office equipment (i.e. computer system, telephone, copier, facsimile, etc.).
    3. Ability to use/operate appropriate measurement equipment to verify material meets customer requirements.
    4. Ability to interface and communicate with others (internally and externally)
    5. Must possess the ability to work a flexible schedule to coincide with just in time manufacturing.
    6. Must possess the knowledge of the making of steel as well as the ability to identify the various types of steel.
    7. Must have 20/20 vision or corrective lenses to 20/20 sight.
    8. Must have strong mathematical skills.
    9. Must have knowledge of Microsoft Word, Excel and PowerPoint?
    10. Must be able to read a tape measure
    11. Must be able to read a caliper
    12. Must be able to read a micrometer.  
  1. Work Style:
    1. Maintain a professional atmosphere towards both customers and fellow employees.
    2. Adhere to and enforce company policies and procedures.
    3. Strive to be a part of the company’s aim to deliver the right product safely and profitably, to the right customer, on time, every time.
  1. Experience and Education:
    1. High School Diploma or GED
    2. Steel inspection background
    3. Manufacturing background
    4. Heavy equipment background
    5. Statistical Process Control (SPC) background.
  1. Training:
    1. Basic Orientation
    2. Occupational Noise Exposure
    3. Powered Industrial Truck Training
    4. QS Document Training

What Target Metal Blanking employees say

Pay

Hours and flexibility

Workplace

Get the full story on Breakroom