ZipRecruiter

Log In

1

Metrology Manager Jobs in Reno, NV (NOW HIRING)

Ichor Systems

Flow Metrology Engineer

Sparks, NV · On-site

Ichor is hiring a Flow Metrology Engineer who is passionate about using technology to make the ... Investigate experimental characterization and implement feedback to manage design of laminar flow ...

Ichor Systems

Flow Metrology Engineer

Sparks, NV · On-site

Ichor is hiring a Flow Metrology Engineer who is passionate about using technology to make the ... Investigate experimental characterization and implement feedback to manage design of laminar flow ...

Amperesand

Sr Manager, Quality Engineering

Reno, NV

The Sr. Manager of Quality Engineering will be based at our manufacturing site in Reno, NV. This is ... Develop and maintain the quality labs for metrology and material analysis. Qualifications * Degree ...

Ichor Systems

Engineering Technician

Sparks, NV · On-site

Operate advanced gas metrology systems and coordinate efficiently managed test schedules * Write control sequences and code for automated testing * Collect data and perform preliminary analysis on ...

Ichor Systems

Engineering Technician

Sparks, NV

Operate advanced gas metrology systems and coordinate efficiently managed test schedules * Write control sequences and code for automated testing * Collect data and perform preliminary analysis on ...

Amperesand

Sr Manager, Quality Engineering

Reno, NV · On-site

The Sr. Manager of Quality Engineering will be based at our manufacturing site in Reno, NV. This is ... Develop and maintain the quality labs for metrology and material analysis. Qualifications * Degree ...

Acara Solutions

Engineering Technician

Sparks, NV · On-site

$29 - $31/hr

Operate advanced gas metrology systems and coordinate efficiently managed test schedules * Write control sequences and code for automated testing * Collect data and perform preliminary analysis on ...

BHI Energy

Quality Assurance Technician

Reno, NV · On-site

Quality Manager, Quality Engineers Examples of Essential Functions: Including but not limited to ... Demonstrated knowledge of Metrology and Inspection Technique. * Ability to use hand tools ...

Sun Technical

Quality Control Technician

Reno, NV · On-site

$18.75 - $24/hr

Quality Manager, Quality Engineers Examples of Essential Functions: Including but not limited to ... Demonstrated knowledge of Metrology and Inspection Technique. * Ability to use hand tools ...

BHI Energy

Quality Assurance Technician

Reno, NV · On-site

Quality Manager, Quality Engineers Examples of Essential Functions: Including but not limited to ... Demonstrated knowledge of Metrology and Inspection Technique. * Ability to use hand tools ...

Elemental Brands

Quality Assurance Technician I

Reno, NV · On-site

$22.50 - $24/hr

... Product Management, and Engineering, to improve quality methods and system processes which will ... Ability to safely use various metrology tools equipment including but not limited to, calipers ...

Elemental Brands

Quality Assurance Technician I

Reno, NV · On-site

$22.50 - $24/hr

... Product Management, and Engineering, to improve quality methods and system processes which will ... Ability to safely use various metrology tools equipment including but not limited to, calipers ...

Elemental LED, Inc.

Quality Assurance Technician I

Reno, NV · On-site

$22.50 - $24/hr

... Product Management, and Engineering, to improve quality methods and system processes which will ... Ability to safely use various metrology tools equipment including but not limited to, calipers ...

next page

Showing results 1-20

All JobsMetrology JobsMetrology Manager JobsMetrology Manager Jobs in Reno, NV

Metrology Manager information

See Reno, NV salary details

$36.9K

$95.2K

$172K

How much do metrology manager jobs pay per year?

As of Sep 12, 2026, the average yearly pay for metrology manager in Reno, NV is $95,184.00, according to ZipRecruiter salary data. Most workers in this role earn between $76,300.00 and $109,700.00 per year, depending on experience, location, and employer.

What does a metrology manager do?

A Metrology Manager oversees the calibration, testing, and maintenance of measurement instruments to ensure accuracy and compliance with industry standards. They develop and implement metrology procedures, manage a team of technicians, and ensure regulatory requirements are met. Additionally, they analyze measurement data, troubleshoot equipment issues, and support continuous improvement initiatives to enhance quality and efficiency.

What are the key skills and qualifications needed to thrive as a metrology manager?

To thrive as a Metrology Manager, you need a solid background in precision measurement, calibration techniques, and quality management, typically supported by a degree in engineering or a related field. Familiarity with metrology software, calibration equipment, ISO/IEC 17025 standards, and relevant certifications such as CCT (Certified Calibration Technician) are essential. Strong leadership, problem-solving abilities, and effective communication skills set outstanding candidates apart. These capabilities ensure accurate measurement systems, regulatory compliance, and successful team management within quality-driven manufacturing or laboratory environments.

What are some typical challenges faced by metrology managers, and how are they addressed in the workplace?

Metrology Managers often face challenges such as maintaining calibration schedules, ensuring compliance with evolving standards, and integrating new measurement technologies into existing workflows. These challenges are typically addressed through regular training, investment in up-to-date metrology equipment, and close collaboration with engineering, manufacturing, and quality teams. Managers also implement robust documentation systems and continuous improvement practices to uphold accuracy and regulatory requirements. This creates a dynamic, collaborative work environment where adaptability and proactive problem-solving are highly valued.

What are the most commonly searched types of Metrology jobs in Reno, NV?

The most popular types of Metrology jobs in Reno, NV are:

What are popular job titles related to Metrology Manager jobs in Reno, NV?

For Metrology Manager jobs in Reno, NV, the most frequently searched job titles are:

What job categories do people searching Metrology Manager jobs in Reno, NV look for?

The top searched job categories for Metrology Manager jobs in Reno, NV are:

Metrology Manager jobs near you
Infographic showing various Metrology Manager job openings in Reno, NV as of September 2026, with employment types broken down into 14% Internship, and 86% Full Time. Highlights an 100% In-person job distribution, with an average salary of $95,184 per year, or $45.8 per hour.

Flow Metrology Engineer

Sparks, NV • On-site

Ichor Systems
Semiconductor and Electronic Component Manufacturing • 51 - 200 employees
Learn more about Ichor Systemsexternal

Full-time

Re-posted 2 days ago

Ichor Systems rating

9.4

Company rating: 9.4 out of 10

Based on 9 frontline employees who took The Breakroom Quiz

Job description

Ichor is hiring a Flow Metrology Engineer who is passionate about using technology to make the world a better place. We are committed to help and innovate for the people who build and maintain our world! What is it like to work at Ichor? We are a team of highly dedicated R&D engineers who are committed to creating innovative products for our customers. Our teams are collaborative - we brainstorm together and build together because we believe that's the best way to make superior products. We encourage individuals and teams to aim for the fences with radical new ideas.

This position would be ideal for an ambitious engineer looking to further their career in the field of fluids and R&D and push their knowledge of the SEMI Conductor Industry. Once hired, the Flow Metrology Engineer will be located onsite at our facility in Sparks, NV.

This is a paid position with benefits.

Qualifications

  • BSME, BSCE, BS of Physics w. Emphasis in Fluid Dynamics or greater. 

  • 5+ years of engineering or related work experience.

  • Strong coding ability in MATLAB/Simulink, LabVIEW, VBA, and C/C#/C++.
  • Strong experience using version control software.
  • Strong understanding of chemical and mechanical engineering principles. Ability to exercise discretion/independent judgment.
  • Ability to Independently drive projects and articulate ideas to other members of the team.
  • Ability to interact with internal and external customers.
  • Technical expertise in the development and commercialization of systems used in semiconductor flow delivery.
  • Working knowledge of design controls, and quality systems.

Responsibilities

  • Plan, organize, and lead projects used to develop gas flow & pressure testing, including rate of rise systems, flow accuracy validation, transient flow testing, and be able to support others in flow metrology setup to achieve evolving goals.
  • Learn the language used to write sequences for the metrology systems and then develop said test sequences.
  • Write MATLAB code to analyze flow metrology data. 
  • Write MATLAB code to process device calibration data used in the product. 
  • Develop, improve, and verify algorithms used for device calibrations. 
  • Develop flow metrology analysis to support Product Calibration Maps. 
  • Derive correlations with a solid theoretical basis for experimental work.
  • Work with and design 1D flow networks and P&IDs.  
  • Lead and guide other team members involved in all tasks above. 
  • Effectively document work to be used as a reference for others. 
  • Adept at using first principles to break down complex experimental results into fundamental problems.
  • Investigate experimental characterization and implement feedback to manage design of laminar flow restrictors and valves.
  • Apply engineering principles of fluid mechanics, mass transfer, thermodynamics and control systems to formulate experiments and interpret their results.
  • Coordinate with counterparts in other departments as needed keeping engineering manager informed.
  • Contribute significantly to design controls documents, test plans and test execution
  • Perform other duties assigned by director or tech staff engineers as needed and work independently with minimal supervision.
     

What Ichor Systems employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply