Metrologist/CMM Programmer
Albion, IN · On-site
The Albion Metrologist will perform: Measurement of parts with Coordinate Measurement Machines using PCDMIS, QUINDOS, QV-Pak, FormTracePak, softwares, Form Tracer, surface roughness, OptoCat and ...
Metrologist/CMM Programmer
Albion, IN · On-site
The Albion Metrologist will perform: Measurement of parts with Coordinate Measurement Machines using PCDMIS, QUINDOS, QV-Pak, FormTracePak, softwares, Form Tracer, surface roughness, OptoCat and ...
Metrologist/CMM Programmer
Albion, IN · On-site
The Albion Metrologist will perform: Measurement of parts with Coordinate Measurement Machines using PCDMIS, QUINDOS, QV-Pak, FormTracePak, softwares, Form Tracer, surface roughness, OptoCat and ...
Metrologist/CMM Programmer
Albion, IN · On-site
The Albion Metrologist will perform: Measurement of parts with Coordinate Measurement Machines using PCDMIS, QUINDOS, QV-Pak, FormTracePak, softwares, Form Tracer, surface roughness, OptoCat and ...
Metrologist/CMM Programmer
Albion, IN · On-site
The Albion Metrologist will perform: Measurement of parts with Coordinate Measurement Machines using PCDMIS, QUINDOS, QV-Pak, FormTracePak, softwares, Form Tracer, surface roughness, OptoCat and ...
Metrologist/CMM Programmer
Albion, IN · On-site
The Albion Metrologist will perform: Measurement of parts with Coordinate Measurement Machines using PCDMIS, QUINDOS, QV-Pak, FormTracePak, softwares, Form Tracer, surface roughness, OptoCat and ...
The Albion Metrologist will perform: Measurement of parts with Coordinate Measurement Machines using PCDMIS, QUINDOS, QV-Pak, FormTracePak, softwares, Form Tracer, surface roughness, OptoCat and ...
The Albion Metrologist will perform: Measurement of parts with Coordinate Measurement Machines using PCDMIS, QUINDOS, QV-Pak, FormTracePak, softwares, Form Tracer, surface roughness, OptoCat and ...
Metrologist/CMM Programmer
Albion, IN · On-site
$65 - $90/hr
The Albion Metrologist will perform: Measurement of parts with Coordinate Measurement Machines using PCDMIS, QUINDOS, QV-Pak, FormTracePak, softwares, Form Tracer, surface roughness, OptoCat and ...
New
Metrologist/CMM Programmer
Albion, IN · On-site
$65 - $90/hr
The Albion Metrologist will perform: Measurement of parts with Coordinate Measurement Machines using PCDMIS, QUINDOS, QV-Pak, FormTracePak, softwares, Form Tracer, surface roughness, OptoCat and ...
New
The Albion Metrologist will perform: Measurement of parts with Coordinate Measurement Machines using PCDMIS, QUINDOS, QV-Pak, FormTracePak, softwares, Form Tracer, surface roughness, OptoCat and ...
Quick apply
The Albion Metrologist will perform: Measurement of parts with Coordinate Measurement Machines using PCDMIS, QUINDOS, QV-Pak, FormTracePak, softwares, Form Tracer, surface roughness, OptoCat and ...
ORA_ON_SITE Description SAIC is seeking a dedicated and experienced Metrology Engineer to support our projects in the selection, calibration, and management of test equipment. This role involves ...
ORA_ON_SITE Description SAIC is seeking a dedicated and experienced Metrology Engineer to support our projects in the selection, calibration, and management of test equipment. This role involves ...
The Metrology Engineer will support the Navy's AN/SPY-1 Organic Sustainment Capability Prototype OTA by providing precision measurement expertise for radar subsystem prototyping and sustainment. This ...
The Metrology Engineer will support the Navy's AN/SPY-1 Organic Sustainment Capability Prototype OTA by providing precision measurement expertise for radar subsystem prototyping and sustainment. This ...
Metrology Lab Manager
Lafayette, IN · On-site
A Tier 2 plastic injection molding company is searching for an Advanced Metrology Manager with the drive and experience to manage our Metrology Lab to exceed internal and external customer ...
Quick apply
Metrology Lab Manager
Lafayette, IN · On-site
A Tier 2 plastic injection molding company is searching for an Advanced Metrology Manager with the drive and experience to manage our Metrology Lab to exceed internal and external customer ...
The Metrology Engineer will support the Navy's AN/SPY-1 Organic Sustainment Capability Prototype OTA by providing precision measurement expertise for radar subsystem prototyping and sustainment. This ...
The Metrology Engineer will support the Navy's AN/SPY-1 Organic Sustainment Capability Prototype OTA by providing precision measurement expertise for radar subsystem prototyping and sustainment. This ...
SAIC is seeking a dedicated and experienced Metrology Engineer to support our projects in the selection, calibration, and management of test equipment. This role involves close collaboration with ...
SAIC is seeking a dedicated and experienced Metrology Engineer to support our projects in the selection, calibration, and management of test equipment. This role involves close collaboration with ...
Metrology Engineer
New Albany, IN · On-site
$70 - $100/hr
Metrology Engineer Description Job title: Metrology Engineer This position is located in New Albany, IN. Summary/Objective: The position would be required to develop and support the automated ...
Metrology Engineer
New Albany, IN · On-site
$70 - $100/hr
Metrology Engineer Description Job title: Metrology Engineer This position is located in New Albany, IN. Summary/Objective: The position would be required to develop and support the automated ...
Metrology Engineer
Crane, IN · On-site
SAIC is seeking a dedicated and experienced Metrology Engineer to support our projects in the selection, calibration, and management of test equipment. This role involves close collaboration with ...
Metrology Engineer
Crane, IN · On-site
SAIC is seeking a dedicated and experienced Metrology Engineer to support our projects in the selection, calibration, and management of test equipment. This role involves close collaboration with ...
Metrology Engineer
Crane, IN · On-site
Description SAIC is seeking a dedicated and experienced Metrology Engineer to support our projects in the selection, calibration, and management of test equipment. This role involves close ...
Metrology Engineer
Crane, IN · On-site
Description SAIC is seeking a dedicated and experienced Metrology Engineer to support our projects in the selection, calibration, and management of test equipment. This role involves close ...
Metrology Engineer
Crane, IN · On-site
ORA_ON_SITE Description SAIC is seeking a dedicated and experienced Metrology Engineer to support our projects in the selection, calibration, and management of test equipment. This role involves ...
Metrology Engineer
Crane, IN · On-site
ORA_ON_SITE Description SAIC is seeking a dedicated and experienced Metrology Engineer to support our projects in the selection, calibration, and management of test equipment. This role involves ...
Metrology Engineer - AN/SPY-1 Organic Prototyping Capability with Security Clearance
Crane, IN · On-site
The Metrology Engineer will support the Navy's AN/SPY-1 Organic Sustainment Capability Prototype OTA by providing precision measurement expertise for radar subsystem prototyping and sustainment. This ...
Metrology Engineer - AN/SPY-1 Organic Prototyping Capability with Security Clearance
Crane, IN · On-site
The Metrology Engineer will support the Navy's AN/SPY-1 Organic Sustainment Capability Prototype OTA by providing precision measurement expertise for radar subsystem prototyping and sustainment. This ...
Metrology Engineer
New Albany, IN · On-site
Metrology Engineer This position is located in New Albany, IN. Summary/Objective: The position would be required to develop and support the automated inspection programs for VI Molding, VI Stamping ...
Metrology Engineer
New Albany, IN · On-site
Metrology Engineer This position is located in New Albany, IN. Summary/Objective: The position would be required to develop and support the automated inspection programs for VI Molding, VI Stamping ...
Metrology Engineer
New Albany, IN · On-site
Metrology Engineer This position is located in New Albany, IN. Summary/Objective: The position would be required to develop and support the automated inspection programs for VI Molding, VI Stamping ...
Metrology Engineer
New Albany, IN · On-site
Metrology Engineer This position is located in New Albany, IN. Summary/Objective: The position would be required to develop and support the automated inspection programs for VI Molding, VI Stamping ...
The Albion Metrologist will perform: Measurement of parts with Coordinate Measurement Machines using PCDMIS, QUINDOS, QV-Pak, FormTracePak, softwares, Form Tracer, surface roughness, OptoCat and ...
The Albion Metrologist will perform: Measurement of parts with Coordinate Measurement Machines using PCDMIS, QUINDOS, QV-Pak, FormTracePak, softwares, Form Tracer, surface roughness, OptoCat and ...
Metrology Engineer
New Albany, IN · On-site
Metrology Engineer This position is located in New Albany, IN. Summary/Objective: The position would be required to develop and support the automated inspection programs for VI Molding, VI Stamping ...
Quick apply
Metrology Engineer
New Albany, IN · On-site
Metrology Engineer This position is located in New Albany, IN. Summary/Objective: The position would be required to develop and support the automated inspection programs for VI Molding, VI Stamping ...
Metrologist information
See Indiana salary details
$35.2K - $42.6K
4% of jobs
$42.6K - $49.9K
1% of jobs
$49.9K - $57.3K
1% of jobs
$57.3K - $64.6K
1% of jobs
$64.6K - $72K
2% of jobs
$72K - $79.3K
1% of jobs
$79.3K - $86.7K
2% of jobs
$89.7K is the 25th percentile. Wages below this are outliers.
$86.7K - $94K
31% of jobs
The median wage is $95K / yr.
$94K - $101.4K
49% of jobs
$101.4K - $108.7K
3% of jobs
$108.7K - $116.1K
4% of jobs
$35.2K
$91.6K
$116.1K
How much do metrologist jobs pay per year?
As of Sep 4, 2026, the average yearly pay for metrologist in Indiana is $91,615.00, according to ZipRecruiter salary data. Most workers in this role earn between $93,700.00 and $93,700.00 per year, depending on experience, location, and employer.
What is a metrologist?
Metrologists are professionals who specialize in the science of measurement. They develop, maintain, and calibrate measurement instruments and standards to ensure accuracy and reliability in various fields such as manufacturing, engineering, and research. Metrologists play a crucial role in quality control, product testing, and compliance with industry standards. Their work helps organizations ensure that measurements are consistent, traceable, and meet regulatory requirements.
What does a metrologist do?
As a metrologist, your duties focus on the calibration of equipment. You develop and test methods for calibrating devices and ensuring accurate measurements in scientific, laboratory, or technical settings. As a metrologist, you may also develop, test, or audit methods for performing maintenance of measurement instrumentation. You use statistics, math, physics, or laboratory sciences to analyze current measurement procedures and recommend changes or improvements. In some jobs, you may document calibration standards to ensure your employer or client complies with regulations.
What are the key skills and qualifications needed to thrive as a metrologist, and why are they important?
To thrive as a Metrologist, you need a strong background in mathematics, physics, and measurement science, typically supported by a degree in engineering or a related field. Familiarity with calibration equipment, statistical analysis software, and quality management systems such as ISO/IEC 17025 is often required. Attention to detail, problem-solving abilities, and strong communication skills are essential soft skills in this role. These competencies ensure accurate measurements, maintain industry standards, and support continuous improvement in manufacturing or laboratory environments.
How does a metrologist typically collaborate with engineering and quality assurance teams within a manufacturing environment?
Metrologists play a critical role in ensuring measurement accuracy and process control by frequently working alongside engineering and quality assurance teams. They interpret technical drawings, assist in selecting appropriate measurement tools, and provide guidance on calibration standards. Regularly, Metrologists participate in root cause analysis meetings, help troubleshoot measurement discrepancies, and support the implementation of new measurement technologies. This collaborative environment allows Metrologists to contribute directly to product quality and process improvements.
What is the difference between Metrologist vs Calibration Technician?
| Aspect | Metrologist | Calibration Technician |
|---|---|---|
| Credentials | Typically requires a degree in engineering, physics, or related field; certifications like ISO/IEC 17025 are common | Usually has technical training or certification in calibration; may have associate degrees or technical diplomas |
| Work Environment | Laboratories, manufacturing plants, quality assurance departments | Field service, workshops, manufacturing facilities |
| Industry Usage | Used across industries requiring precise measurements, including aerospace, automotive, and manufacturing | Primarily in manufacturing and maintenance sectors for equipment calibration |
While both roles focus on measurement accuracy, a Metrologist typically handles complex calibration, measurement system analysis, and standards development, whereas a Calibration Technician performs routine calibration tasks and maintains measurement equipment. The Metrologist's role is more analytical and research-oriented, often requiring advanced education, while Calibration Technicians focus on operational calibration tasks to ensure equipment accuracy.
Do you need a degree to be a metrologist?
A degree is typically required to become a metrologist, with many positions requiring at least a bachelor's degree in fields such as physics, engineering, or applied sciences. Relevant skills include knowledge of measurement standards, calibration, and instrumentation, and some roles may prefer or require certifications like ISO/IEC 17025 accreditation. Practical experience and technical training can also be important for advancement in the field.
Is metrology a good career?
Metrologists evaluate and maintain measurement systems to ensure accuracy and compliance with standards, often working in laboratories, manufacturing, or quality assurance environments. The field offers stable employment, requires technical skills, and may involve certifications such as ISO or ANSI standards. It can be a rewarding career for those interested in precision, technical problem-solving, and quality control.
More about Metrologist jobs
What are the most commonly searched types of Metrologist jobs in Indiana?
The most popular types of Metrologist jobs in Indiana are:
What are popular job titles related to Metrologist jobs in Indiana?
For Metrologist jobs in Indiana, the most frequently searched job titles are:
What job categories do people searching Metrologist jobs in Indiana look for?
The top searched job categories for Metrologist jobs in Indiana are:
What are popular job titles related to Metrologist jobs in IN?
For Metrologist jobs in IN, the most frequently searched job titles are:
Bosch rating
7.4
Based on 97 frontline employees who took The Breakroom Quiz
294th of 496 rated machine equipment manufacturers
Job description
Company Description
Do you want beneficial technologies being shaped by your ideas? Whether in the areas of mobility solutions, consumer goods, industrial technology or energy and building technology - with us, you will have the change to improve quality of life all across the globe. Welcome to Bosch!
Job Description
The Albion Metrologist will perform:
Measurement of parts with Coordinate Measurement Machines using PCDMIS, QUINDOS, QV-Pak, FormTracePak, softwares, Form Tracer, surface roughness, OptoCat and Polyworks, calipers, micrometers, indicators, height gages, pin gages, etc.
Development and setup of modular fixturing for part measurement.
Ballooning of drawings and report generation from CMM data and hand measurements.
Programming and user of Camera Scanner for part inspection to CAD models.
Explanation of layout reports to tooling, molding engineering, and quality engineers when necessary.
The control of all Inspection/Measuring/Test equipment within the plant through a calibration system.
Use of Microsoft Office products: Outlook, Excel, etc.
Advising others on methods of resolving measurement problems and exchanging information with other metrology personnel.
Supporting and promoting the quality system.
There will be some travel required for this position for training.
There will be some overtime as needed.
Qualifications
QUALIFICATIONS , EDUCATION and/or EXPERIENCE
Associate's degree (A. A.) or equivalent from two-year college or technical school; two years related experience and/or training; or equivalent combination of education and experience.
Blueprint reading required. Experience working with CAD models desired.
Programming with PCDMIS, QUINDOS (preferred) and or QVPAK.
Gear measurement experience desired.
Experience with tracing and surface roughness measurement a plus.
Attention to detail, self-motivation and organization skills are necessary.
Good use of Microsoft Office tools including data entry, formatting, and the creation of charts.
Additional Information
Equal Opportunity Employer, including disability/veterans.
BOSCH is a proud supporter of STEM (Science, Technology, and Engineering & Mathematics) Initiatives
FIRST Robotics (For Inspiration and Recognition of Science and Technology)
AWIM (A World In Motion)
Do you want beneficial technologies being shaped by your ideas? Whether in the areas of mobility solutions, consumer goods, industrial technology or energy and building technology - with us, you will have the change to improve quality of life all across the globe. Welcome to Bosch!
Job Description
The Albion Metrologist will perform:
Measurement of parts with Coordinate Measurement Machines using PCDMIS, QUINDOS, QV-Pak, FormTracePak, softwares, Form Tracer, surface roughness, OptoCat and Polyworks, calipers, micrometers, indicators, height gages, pin gages, etc.
Development and setup of modular fixturing for part measurement.
Ballooning of drawings and report generation from CMM data and hand measurements.
Programming and user of Camera Scanner for part inspection to CAD models.
Explanation of layout reports to tooling, molding engineering, and quality engineers when necessary.
The control of all Inspection/Measuring/Test equipment within the plant through a calibration system.
Use of Microsoft Office products: Outlook, Excel, etc.
Advising others on methods of resolving measurement problems and exchanging information with other metrology personnel.
Supporting and promoting the quality system.
There will be some travel required for this position for training.
There will be some overtime as needed.
Qualifications
QUALIFICATIONS , EDUCATION and/or EXPERIENCE
Associate's degree (A. A.) or equivalent from two-year college or technical school; two years related experience and/or training; or equivalent combination of education and experience.
Blueprint reading required. Experience working with CAD models desired.
Programming with PCDMIS, QUINDOS (preferred) and or QVPAK.
Gear measurement experience desired.
Experience with tracing and surface roughness measurement a plus.
Attention to detail, self-motivation and organization skills are necessary.
Good use of Microsoft Office tools including data entry, formatting, and the creation of charts.
Additional Information
Equal Opportunity Employer, including disability/veterans.
BOSCH is a proud supporter of STEM (Science, Technology, and Engineering & Mathematics) Initiatives
FIRST Robotics (For Inspiration and Recognition of Science and Technology)
AWIM (A World In Motion)
About Bosch
Sourced by ZipRecruiter
Bosch is a renowned multinational company based in Farmington Hills, Michigan. Associated with the industrial technology, consumer goods, and building technology sectors, Bosch is an iconic name in the global market. In addition to its high-quality product roster, which is chiefly characterized by home appliances, power tools, automotive parts, and smart home items, it offers unparalleled services in the realms of software and business process outsourcing. Founded by Robert Bosch in Stuttgart, Germany in 1886, the company has stayed true to its core values of superior quality and innovation.
Industry
Electrical equipment, appliance, and component manufacturing
Company size
10,000+ Employees
Headquarters location
Farmington Hills, MI, US