ZipRecruiter

Log In

1

Machinist Inspector Jobs in Dallas, TX (NOW HIRING)

Branch 42

Be Seen First

CNC Machinist

Dallas, TX · On-site

$29/hr

Inspect finished parts using precision measuring instruments such as calipers and micrometers. * Troubleshoot machining issues and replace tooling as needed. * Record production information using the ...

AtWork

CNC Machinist

Fort Worth, TX · On-site

$21 - $22/hr

CNC Machine Operator - Fort Worth, TX 76131 We are currently hiring an experienced CNC Machine ... Inspect finished products to meet specifications * Perform routine maintenance and keep work area ...

Aerotek

Cnc Machinist

Dallas, TX · On-site

$41K - $72K/yr

Perform basic inspection of machined parts to verify dimensions and quality. * Monitor machine performance and report any issues or irregularities promptly. * Follow established safety procedures and ...

NextDeavor Inc.

Machinist Technician

Fort Worth, TX · On-site

$16 - $20.89/hr

Inspect finished parts using precision measuring instruments (gages, calipers, micrometers) and coordinate measuring machines (CMM) as required * Perform routine preventative maintenance and ensure ...

AAR Corporation

Machinist II

Grand Prairie, TX · On-site

$20.50 - $28.25/hr

Machinists also inspect finished parts for quality and accuracy, using precision instruments. This is not a CNC Operator position. ESSENTIAL DUTIES AND RESPONSIBILITIES * Setting up and operating ...

Entegris

Machinist I

Decatur, TX · On-site

$19.50 - $26.50/hr

Job Title: Machinist I Summary: Perform tasks directly related to the machining of graphite ... inspections or precision work.

Entegris

Machinist I

Decatur, TX · On-site

$19.50 - $26.50/hr

Job Title: Machinist I Summary: Perform tasks directly related to the machining of graphite ... inspections or precision work.

Aerotek

Cnc Mill Machinist

Fort Worth, TX · On-site

$26 - $30/hr

CNC Mill Machinist The CNC Mill Machinist sets up and operates 3-axis CNC mills to produce ... Follow established in-process inspection procedures and promptly notify supervisory or lead ...

YO AI Labs

CNC Machinist Expert - Remote

Dallas, TX · Remote

$50 - $100/hr

CNC Machinist Job Type: Contractor Location: Remote Job Overview We are seeking experienced CNC ... Run first-piece inspections and adjust setups for dimensional accuracy. * Troubleshoot issues such ...

Entegris

Machinist III

Decatur, TX · On-site

$19.50 - $26.50/hr

Machinist III Summary: Perform tasks directly related to the machining of graphite, silicon ... inspections or precision work.

Dynocom Industries Incorporated

Be Seen First

CNC Machinist/Programmer

Fort Worth, TX · On-site

$24 - $40/hr

... inspect finished parts - Make adjustments to machine settings as necessary to maintain product specifications - Perform routine maintenance on machines to ensure optimal performance - Collaborate ...

Entegris

Machinist III

Decatur, TX · On-site

$19.50 - $26.50/hr

Machinist III Summary: Perform tasks directly related to the machining of graphite, silicon ... inspections or precision work.

Dynocom Industries Incorporated

Be Seen First

CNC Machinist/Programmer

Fort Worth, TX · On-site

$24 - $40/hr

... inspect finished parts - Make adjustments to machine settings as necessary to maintain product specifications - Perform routine maintenance on machines to ensure optimal performance - Collaborate ...

Entegris

Machinist III

Decatur, TX · On-site

$19.50 - $26.50/hr

Machinist III Summary: Perform tasks directly related to the machining of graphite, silicon ... inspections or precision work.

Verstela

CNC Machinist (M-F)

Arlington, TX · On-site

$25 - $29/hr

Seeking a detail-oriented CNC Machinist to set up, operate, and inspect precision components for high-performance downhole tools. This role offers long-term stability, predictable weekday hours, and ...

Wabtec

Machinist WMS 3W

Fort Worth, TX · On-site

$37.51/hr

Machinists are responsible for working together as a team to improve manufacturing processes and ... Every employee will be an in-process inspector. * Must be 18 years of age or older. * Must have ...

Wabtec

Machinist WMS 3W

Fort Worth, TX · On-site

Machinists are responsible for working together as a team to improve manufacturing processes and ... Every employee will be an in-process inspector. * Must be 18 years of age or older. * Must have ...

previous pagenext page

Showing results 21-40

All JobsMachinist Inspector JobsMachinist Inspector Jobs in Dallas, TX

Machinist Inspector information

See Dallas, TX salary details

$12

$27

$51

How much do machinist inspector jobs pay per hour?

As of Sep 3, 2026, the average hourly pay for machinist inspector in Dallas, TX is $27.06, according to ZipRecruiter salary data. Most workers in this role earn between $18.32 and $31.15 per hour, depending on experience, location, and employer.

What is a machinist inspector?

A Machinist Inspector is a skilled professional responsible for examining and measuring machined parts to ensure they meet precise engineering specifications and quality standards. They use specialized tools and instruments such as calipers, micrometers, and gauges to verify dimensions and tolerances. Machinist Inspectors play a critical role in manufacturing by ensuring products are accurate and free from defects before they move to the next stage of production or shipment. Their work helps maintain quality control and compliance with industry regulations.

What are the key skills and qualifications needed to thrive as a machinist inspector?

To excel as a Machinist Inspector, you need strong mechanical aptitude, precision measurement skills, and experience with quality control procedures, often supported by a technical diploma or apprenticeship. Familiarity with inspection tools such as micrometers, calipers, coordinate measuring machines (CMM), and industry standards like ISO 9001 is typically required. Attention to detail, analytical thinking, and effective communication are crucial soft skills for identifying defects and coordinating with production teams. These capabilities ensure components meet strict specifications, uphold safety standards, and maintain efficient manufacturing processes.

What are some common challenges faced by machinist inspectors during quality control processes?

Machinist Inspectors often face the challenge of maintaining precision and consistency across large production runs, especially when working with tight tolerances. They must remain vigilant for subtle defects or measurement deviations and be prepared to troubleshoot root causes, which requires a thorough understanding of both machinery and quality standards. Additionally, balancing time constraints with the need for meticulous inspections can be demanding, and effective communication with machinists and engineers is essential to address and resolve any quality issues promptly.

What is the difference between Machinist Inspector vs Machinist?

AspectMachinist InspectorMachinist
CertificationsOften requires inspection certifications and technical trainingRequires machining certifications or technical training
Work EnvironmentInspection areas, quality control labs, manufacturing plantsMachine shops, manufacturing floors, industrial settings
Job FocusInspecting and verifying machined parts for quality and specificationsOperating and setting up machines to produce parts
Employer & IndustryManufacturing, aerospace, automotive industriesMachining, metalworking, manufacturing industries

The main difference between a Machinist Inspector and a Machinist is that the inspector focuses on quality control and verifying parts meet specifications, often requiring inspection certifications. In contrast, a Machinist operates and sets up machines to produce parts. Both roles are essential in manufacturing but serve different functions within the production process.

What are popular job titles related to Machinist Inspector jobs in Dallas, TX?

For Machinist Inspector jobs in Dallas, TX, the most frequently searched job titles are:

What job categories do people searching Machinist Inspector jobs in Dallas, TX look for?

The top searched job categories for Machinist Inspector jobs in Dallas, TX are:

What cities near Dallas, TX are hiring for Machinist Inspector jobs?

Cities near Dallas, TX with the most Machinist Inspector job openings:

Machinist Inspector jobs near you
Infographic showing various Machinist Inspector job openings in Dallas, TX as of August 2026, with employment types broken down into 86% Full Time, 9% Part Time, and 5% Nights. Highlights an 100% In-person job distribution, with an average salary of $56,292 per year, or $27.1 per hour.

CNC Machinist

Branch 42

Dallas, TX • On-site

$29/hr

Full-time

Medical, Dental, Vision

Posted 23 days ago

Be Seen First

After you apply to this job, you can share why you’re interested to jump to the top of the candidate list.

Job description

We are seeking an experienced CNC Machinist II to join our manufacturing team in Arlington, TX. The ideal candidate will be responsible for setting up and operating CNC mills and lathes to manufacture precision parts while maintaining quality and safety standards. This position requires the ability to work independently, interpret blueprints, perform machine setups, inspect finished parts, and troubleshoot machining issues.

Responsibilities

  • Set up and operate CNC mills and lathes to produce precision machined parts.
  • Read and interpret blueprints, engineering drawings, work orders, and machining specifications.
  • Install and adjust tooling, chucks, fixtures, collets, and machine attachments.
  • Set tool offsets and machine parameters.
  • Monitor machine operations and make adjustments to ensure quality and production efficiency.
  • Inspect finished parts using precision measuring instruments such as calipers and micrometers.
  • Troubleshoot machining issues and replace tooling as needed.
  • Record production information using the company's ERP system.
  • Maintain a clean, organized, and safe work environment.
  • Follow all company safety procedures and manufacturing standards.
  • Assist with training or guiding less experienced machinists when needed.
  • Perform other duties as assigned.

Qualifications

  • Minimum 5 years of CNC machining experience in a manufacturing environment.
  • Experience operating CNC mills and/or lathes.
  • Ability to read and interpret blueprints and engineering drawings.
  • Knowledge of machine setup, tooling, offsets, and machining processes.
  • Experience using precision measuring tools, including calipers and micrometers.
  • Strong mechanical aptitude and basic math skills.
  • Ability to work independently with minimal supervision.
  • Strong attention to detail and commitment to quality.

Physical Requirements

  • Ability to stand for an entire shift.
  • Frequently use hands and arms to operate machinery and tools.
  • Lift up to 25 pounds without assistance.
  • Ability to work in a manufacturing environment with moderate to high noise levels.

Work Environment

  • Manufacturing machine shop environment.
  • Steel-toe boots and safety glasses are required.
  • Exposure to moving machinery, metal shavings, and manufacturing debris.
  • Must follow all safety policies, including appropriate work attire.

Apply Today!

If you have CNC machining experience and are looking for a great opportunity to grow with an established manufacturing company, we'd love to hear from you!

To apply:

  1. Complete your application online at www.staff-force.com.
  2. After completing your application, call 214-634- 7686 and ask for Jessica to schedule your interview.
  3. Please be prepared to bring two valid forms of physical ID and your direct deposit information to your interview.

Company Description

We are the largest privately owned and operated staffing company in the state of Texas and have expanded into AZ. We have been in business for over 30 years and specialize in light industrial staffing and take pride in setting ourselves a part from the pack by offering a local feel with a national delivery, incorporating a personal face to face customer service model.