ZipRecruiter

Log In

1

Labview Jobs in Dallas, TX (NOW HIRING)

Prolim Global

Hardware Test Engineer

Greenville, TX · On-site

Exposure to C# or LabVIEW (preferred but not required). * Experience in electronics manufacturing or production test environments. * Knowledge of firmware loading and hardware validation. Preferred ...

AssetWorks

Senior Application Engineer

Plano, TX · Hybrid

  • Vision

Experience with National Instruments tools (LabVIEW, LabWindows/CVI, TestStand). * Familiarity with advanced test strategies and automation frameworks. Work Authorization All applicants must be ...

Kalman & Company

Electronics Technician

Addison, TX · On-site

Experience with data acquisition software environments (LabVIEW, MATLAB, Python-based tools) for sensor configuration or health monitoring * Prior experience supporting federal government or ...

Sol-Ark, LLC

Manufacturing ATE Engineer

Allen, TX

  • Medical

  • Dental

  • Vision

  • Retirement

  • PTO

Experience with LabVIEW, TestStand, or similar ATE development environments. * Knowledge of manufacturing traceability, yield analysis, and continuous improvement. * Experience supporting factory ...

AssetWorks LLC

Senior Application Engineer

Plano, TX · On-site

  • Vision

Experience with National Instruments tools (LabVIEW, LabWindows/CVI, TestStand). * Familiarity with advanced test strategies and automation frameworks. Work Authorization All applicants must be ...

Trescal

Traveling Calibration Technician - Level 3

Irving, TX

$21 - $28.75/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

LabView, SureCal, Met/Cal, etc. Benefits We believe people are the most important part of every business, which is why we offer more than just great health insurance plans at a great rate. At Trescal ...

Trescal

Traveling Calibration Technician - Level 3

Irving, TX · On-site

$20.25 - $27.75/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

LabView, SureCal, Met/Cal, etc. Benefits We believe people are the most important part of every business, which is why we offer more than just great health insurance plans at a great rate. At Trescal ...

Trescal Inc

Traveling Calibration Technician - Level 3

Irving, TX · On-site

$20.25 - $27.75/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

LabView, SureCal, Met/Cal, etc. Benefits We believe people are the most important part of every business, which is why we offer more than just great health insurance plans at a great rate. At Trescal ...

Trescal

Traveling Calibration Technician - Level 3

Irving, TX · On-site

$20.25 - $27.75/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

LabView, SureCal, Met/Cal, etc. Benefits We believe people are the most important part of every business, which is why we offer more than just great health insurance plans at a great rate. At Trescal ...

Trescal Inc.

Traveling Calibration Technician - Level 3

Irving, TX

$20.25 - $27.75/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

LabView, SureCal, Met/Cal, etc. Benefits We believe people are the most important part of every business, which is why we offer more than just great health insurance plans at a great rate. At Trescal ...

previous pagenext page

Showing results 21-40

All JobsLabview JobsLabview Jobs in Dallas, TX

Labview information

See Dallas, TX salary details

$11

$20

$31

How much do labview jobs pay per hour?

As of Aug 19, 2026, the average hourly pay for labview in Dallas, TX is $20.30, according to ZipRecruiter salary data. Most workers in this role earn between $16.59 and $22.12 per hour, depending on experience, location, and employer.

What is a LabVIEW job?

A LabVIEW job typically involves developing, maintaining, and troubleshooting applications using LabVIEW, a graphical programming language from National Instruments. Professionals in this role design automation, control, and data acquisition systems for industries like manufacturing, aerospace, automotive, and research. Responsibilities may include writing code, integrating hardware, analyzing data, and optimizing system performance. Strong problem-solving skills and experience with instrumentation and hardware communication are often required.

What does a typical day look like for someone working as a LabVIEW engineer?

A typical day for a LabVIEW Engineer often involves designing and developing test automation software using the LabVIEW environment, collaborating with hardware engineers to integrate and validate systems, and troubleshooting any issues that arise during testing. You may also write test scripts, analyze data, and coordinate with cross-functional teams to ensure test systems meet project requirements. The role offers variety, as you could be working on new product introductions, supporting ongoing production, or optimizing existing test processes. Regular communication with both technical and non-technical team members is common, making teamwork and clear documentation key aspects of the job.

What are the key skills and qualifications needed to thrive in the LabVIEW position, and why are they important?

To thrive as a LabVIEW Engineer, you need a solid background in electrical engineering, software development, and hands-on experience with National Instruments’ LabVIEW programming environment. Familiarity with test automation tools, data acquisition systems, and relevant LabVIEW certifications (such as CLAD or CLD) is highly beneficial. Strong problem-solving skills, attention to detail, and effective teamwork are important soft skills for this role. These competencies are crucial for designing robust automated test solutions and ensuring seamless integration in complex engineering projects.

Is LabVIEW a good career?

LabVIEW is a specialized software used for data acquisition, instrument control, and automation in engineering and research fields. Careers involving LabVIEW often require knowledge of programming, hardware integration, and system design, and can offer opportunities in industries such as manufacturing, aerospace, and automotive. Job prospects depend on industry demand and individual skills in engineering and software development.

What jobs use LabVIEW?

LabVIEW is commonly used in roles such as test engineer, automation engineer, data acquisition technician, and systems engineer. These jobs often involve developing and maintaining automated test systems, data analysis, and control applications in industries like manufacturing, aerospace, and research laboratories.

What are the most commonly searched types of Labview jobs in Dallas, TX?

The most popular types of Labview jobs in Dallas, TX are:

What are popular job titles related to Labview jobs in Dallas, TX?

For Labview jobs in Dallas, TX, the most frequently searched job titles are:

What job categories do people searching Labview jobs in Dallas, TX look for?

The top searched job categories for Labview jobs in Dallas, TX are:

What cities near Dallas, TX are hiring for Labview jobs?

Cities near Dallas, TX with the most Labview job openings:

Labview jobs near you
Infographic showing various Labview job openings in Dallas, TX as of August 2026, with employment types broken down into 82% Full Time, and 18% Contract. Highlights an 91% In-person, and 9% Hybrid job distribution, with an average salary of $42,234 per year, or $20.3 per hour.

Validation/Characterization Engineer

Texas Instruments Incorporated

Dallas, TX • On-site

Other

Posted 4 days ago

Texas Instruments rating

8.1

Company rating: 8.1 out of 10

Based on 86 frontline employees who took The Breakroom Quiz

50th of 159 rated electronics manufacturers

Job description


Change the world. Love your job.
About the Team
This role is in the HVDC datacenter product line where we are working on designing the chips needed for the next generation of AI datacenter power supplies. This is a high visibility and high growth product area. The product line develops both 400V GaN power stages as well as low-voltage synchronous rectifiers. We are looking for a validation engineer that will lead the validation efforts across both the primary-side 400V GaN power stages and the secondary low-voltage synchronous rectifiers, playing a critical part in bringing next-generation AI datacenter power solutions to market.
Job Responsibilities
As a Validation Engineer, your primary responsibility is to ensure the product meets its specifications as defined in the datasheet and VVCM (validation/verification compliance matrix). Beyond specification compliance, you are responsible for ensuring device functionality is fully characterized and validated across real-world system-level use cases. In order to achieve this, validation engineers design PCB boards and develop automation software to increase coverage and reduce data collection time. You will also work closely with design, systems, and application engineers to drive root cause analysis on failures and influence product improvements based on validation findings.
As a member of the HVDC new product development execution team, you will be responsible for validating both the 400V GaN power stages and the low voltage synchronous rectifiers. Validation work will involve the following:
  1. Work with the product definition and design team before device availability to thoroughly understand validation requirements, including device-level and system-level specifications.
  2. Define, own, and drive a comprehensive validation test plan and schedule that covers every specification in the VVCM, the datasheet, and required functional tests, ensuring full traceability and on-time delivery of results.
  3. Design and build validation PCBs using Cadence Allegro X that meet high-voltage signal and power integrity requirements for the GaN power stages and high-current requirements for the low-voltage synchronous rectifiers, while leveraging and integrating with existing validation hardware infrastructure.
  4. Build reusable, automated test sequences using NI TestStand and LabVIEW to execute the validation plan, collect characterization data across multiple devices and test conditions, and drive execution of all functional tests.
  5. Analyze characterization data collected across multiple devices and test conditions against VVCM specifications to assess device compliance, verify that all functional tests have defined pass/fail criteria, and confirm all tests have passed prior to validation sign-off.
  6. Drive cross-functional reviews covering validation hardware, test results, and debug findings with stakeholders across design, systems, applications, and test engineering teams.
  7. Perform datasheet plot generation; apply statistical analysis (distributions, Cpk, limit capability) to assess spec margins and drive datasheet limit decisions.
  8. Investigate unexpected behavior when observed during validation through structured design of experiments (DoE) to narrow down the root cause - whether an error in stimulus, error in hardware, or a suspect on-device circuit block - and drive resolution with the design team.
  9. Maintain clear, thorough documentation of validation test plans, test procedures, and debug findings.
  10. Author concise validation summaries that include all test results for cross-functional reviews and program records.

Qualifications
Minimum requirements:
  • Bachelor's Degree in Electrical Engineering or related field of study
  • 3+ years of relevant semiconductor industry experience in Characterization or Validation
  • Proficiency with lab instrumentation: oscilloscopes, SMUs, DMMs, signal generators, power supplies, and NI PXI system
  • Experience developing test automation using Python, NI TestStand, LabVIEW

Preferred qualifications:
Domain Knowledge & Interpersonal
  • Experience testing high-voltage GaN power stages and low-voltage synchronous rectifiers-including COSS, double-pulse test, SOA, and IDSAT measurements-is a strong plus.
  • Proven ability to thrive in a fast-paced, results-driven development environment.
  • Demonstrated expertise in diagnosing and resolving complex hardware, software, and device-level issues using systematic debugging methodologies and root-cause analysis.
  • Strong hands-on laboratory skills, including proficient soldering, board bring up, and equipment setup for validation testing.
  • Ability to establish strong relationships with key stakeholders critical to success, both internally and externally.
  • Strong verbal and written communication skills.
  • Self-driven with a strong sense of ownership - able to independently plan and execute validation work from test plan definition through sign-off with minimal direction.

Hardware
  • Hands-on PCB design experience using Cadence Allegro X.
  • Understanding of power electronics layout fundamentals specifically for GaN FETs.
  • Experience working with high-voltage power circuits in a lab environment.

Software
  • Proficiency with Python/NI TestStand/LabVIEW for automated data collection and test sequence development.
  • Familiarity with validation compliance tracking tools
  • Experience with Git or equivalent version control system

Data Analysis
  • Experience with Spotfire or equivalent tool for data visualization and analysis
  • Experience generating datasheet-quality characterization plots from data
  • Working knowledge of statistical methods for limit validation: distribution analysis, Cpk, and specification capability

About Us
Why TI?
  • Engineer your future. We empower our employees to truly own their career and development. Come collaborate with some of the smartest people in the world to shape the future of electronics.
  • We're different by design. Diverse backgrounds and perspectives are what push innovation forward and what make TI stronger. We value each and every voice, and look forward to hearing yours. Meet the people of TI
  • Benefits that benefit you. We offer competitive pay and benefits designed to help you and your family live your best life. Your well-being is important to us. Please find our country-specific benefits here

About Texas Instruments
Texas Instruments Incorporated (Nasdaq: TXN) is a global semiconductor company that designs, manufactures and sells analog and embedded processing chips for markets such as industrial, automotive, data center, personal electronics and communications equipment. At our core, we have a passion to create a better world by making electronics more affordable through semiconductors. This passion is alive today as each generation of innovation builds upon the last to make our technology more reliable, more affordable and lower power, making it possible for semiconductors to go into electronics everywhere. Learn more at TI.com.
Texas Instruments is an equal opportunity employer and supports a diverse, inclusive work environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, creed, disability, genetic information, national origin, gender, gender identity and expression, age, sexual orientation, marital status, veteran status, or any other characteristic protected by federal, state, or local laws.
If you are interested in this position, please apply to this requisition.
About the Team
TI does not make recruiting or hiring decisions based on citizenship, immigration status or national origin. However, if TI determines that information access or export control restrictions based upon applicable laws and regulations would prohibit you from working in this position without first obtaining an export license, TI expressly reserves the right not to seek such a license for you and either offer you a different position that does not require an export license or decline to move forward with your employment.

What Texas Instruments employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Texas Instruments logo

About Texas Instruments

Sourced by ZipRecruiter

As a global semiconductor company, we design, manufacture, test and sell analog and embedded processing chips to nearly 100,000 customers. Our products enable electronics everywhere and in things you experience every day - from health care, smart homes and connected cars to drones, smart phones and more. Our passion to create a better and more sustainable world by making electronics more affordable through semiconductors drives us to make our technology smaller, more efficient, more reliable and more affordable.

Industry

Semiconductor and electronic component manufacturing

Company size

10,000+ Employees

Headquarters location

Dallas, TX, US

Year founded

1930

View All Texas Instruments Jobs

Apply