Internship Biomedical Engineering Technologist Jobs

Serves as a Biomedical Equipment Support Specialist (BESS) within a Healthcare Technology Management (HTM) department at the Richmond VA Medical Center. Works in support of the medical equipment management program. Troubleshoot, repair and perform planned maintenance on a range of medical devices and clinical systems.
Qualifications:Education
Associates or higher degree in the biomedical technology or biomedical engineering field;
OR
Associates or higher degree in electronics, a field of information technology, or engineering (other than biomedical engineering) AND 1 year of creditable experience;
OR
Completion of the Department of Defense (DOD) biomedical equipment technician training program;
OR
Completion of a DOD training program in repair and maintenance of electronic systems or information technology AND 1 year of creditable experience;
OR
Completion of a biomedical engineering technician or Healthcare Technology Management (HTM) certificate program that included an internship or apprenticeship;
OR
Completion of biomedical engineering technician or HTM certificate program that did not include an internship AND 1 year of creditable experience;
OR
Hold or having ever held certification as a Certified Biomedical Equipment Technician (CBET), Certified Radiology Equipment Specialist (CRES), Certified Laboratory Equipment Specialist (CLES), or Certified Healthcare Technology Manager (CHTM). Continuous maintenance of certification is not required throughout VHA employment.
GS-7
Experience. One year of creditable experience equivalent to the next lower grade (GS-7).
In addition to the experience above, the candidate must demonstrate the following:
Knowledge of basic networking concepts including Access Control List (ACL), Transmission Control Protocol/Internet Protocol (TCP/IP), and Virtual Local Area Networks (VLAN).
Knowledge of computer and server hardware and software functionality including virus protection, operating system patches and upgrades, and information security tools.
Ability to interpret a variety of technical data such as schematic drawings, wiring diagrams, table charts, mathematical expressions, and formulas.
Ability to use standard level test equipment including multi-meters, electrical safety analyzers, patient simulators, storage oscilloscopes, manometers, and tachometers.
Ability to perform equipment maintenance and operating procedures.
GS-11
Experience. One year of creditable experience equivalent to the next lower grade (GS-9).
In addition to the experience above, the candidate must demonstrate the following:
Knowledge of standards including National Fire Protection Association (NFPA), Food and Drug Administration (FDA), the Joint Commission (TJC), and the Association for the Advancement of Medical Instrumentation (AAMI) for safe operation of medical equipment and clinical systems.
Skill in using test and calibration equipment including digital multi- meters, electrical safety analyzers, defibrillator analyzers, patient simulators, manometers, tachometers, and Local Area Network (LAN) analyzers.
Skill in interpreting a variety of technical data including schematic drawings and wiring diagrams.
Skill in applying networking principles, such as Access Control List (ACL), Transmission Control Protocol/Internet Protocol (TCP/IP), and Virtual Local Area Networks (VLAN).
Ability to perform advanced testing to troubleshoot medical equipment and clinical system interfaces.
Ability to maintain medical computers and software.
Ability to manage projects involving medical equipment and clinical systems.
NOTE: Experience is only creditable if it was acquired in the health care industry and is either directly related to the position to be filled or a related field (for example, Biomedical Equipment Support Specialist, Biomedical Equipment Technician, Field Service Engineer, Medical Equipment Repairer, or Information Technology (IT) Specialist). Experience satisfying this requirement may be paid or non-paid employment as a BESS. (2) Part-Time Experience. Part-time
Physical Requirements: Heavy Lifting (45 lbs and over); Heavy Carrying (45 lbs and over); Straight Pulling (up to 1 hour); Pushing (1 - 2 hours); Reaching above shoulder; Both legs required; Kneeling (up to 3 hours); Depth perception; Ability to distinguish shades of colors; Hearing (aid permitted); Emotional/Mental Stability.
Environmental Factors: The work may include electrical energy, working on ladders, working outdoors, and working alone. There may be occasional exposure to moderate risks or discomforts associated with hazardous materials. The work may involve occasional travel, driving, and/or traveling by motor vehicle.
Infection Control:
Demonstrates infection control practices for disease prevention (i.e. hand washing, universal precautions/isolation procedures, including TB requirement/precautions).Education:Note: Only education or degrees recognized by the U.S. Department of Education from accredited colleges, universities, schools, or institutions may be used to qualify for Federal employment. You can verify your education here: http://ope.ed.gov/accreditation/. If you are using foreign education to meet qualification requirements, you must send a Certificate of Foreign Equivalency with your transcript in order to receive credit for that education. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.Employment Type: OTHER