ZipRecruiter

Log In

1

Hydrostatic Testing Jobs in Texas (NOW HIRING)

Clean Harbors

Hydroblaster Technician

Deer Park, TX · On-site

$16.50 - $22.75/hr

This team member is responsible for the successful execution of setting up and assisting with water treatment systems, pipeline hydrostatic testing and various other responsibilities. The ...

Audubon Companies

QC Technician

Houston, TX · On-site

$18.25 - $23.25/hr

Witness testing activities such as hydrostatic testing, NDT, torque verification, coatings inspections, pressure testing, or electrical testing (as applicable). * Ensure inspection documentation is ...

Tri-Starr Talent

Be Seen First

Pipefitter - Industrial Piping & Fabrication $28+ AM Shift

New Braunfels, TX · On-site

$28 - $34/hr

Perform pipe modifications, bolt-up, hydrostatic testing, and system repairs when required. * Inspect completed work to verify measurements, alignment, weld preparation, and overall quality before ...

Flowserve

DCI/ Pump Repair Technician

Pasadena, TX · On-site

$14.25 - $18.25/hr

Safely use torches, heating induction tools, and liquid nitrogen for interference/shrink fits; operate balancing machines and perform low-pressure air and hydrostatic testing to verify seal integrity.

Spitzer Industries

Pipe Fitter Class II

Houston, TX · On-site

$24 - $30.75/hr

Inspect, examine, and test installed systems and pipe lines, using pressure gauge, hydrostatic testing, observation and other methods. * Measure and mark pipes for cutting and threading. * Plan pipe ...

Flowserve

DCI/Repair Technician

Pasadena, TX · On-site

Safely use torches, heating induction tools, and liquid nitrogen for interference/shrink fits; operate balancing machines and perform low-pressure air and hydrostatic testing to verify seal integrity.

previous page

Showing results 41-60

All JobsHydrostatic Testing JobsHydrostatic Testing Jobs in Texas

Hydrostatic Testing information

What is hydrostatic testing?

Hydrostatic testing is a method used to check the strength and leak-resistance of pressure vessels, such as pipelines, boilers, and fuel tanks. The process involves filling the vessel with water or another incompressible fluid, then pressurizing it to a level higher than its normal operating pressure. This helps identify any leaks or weaknesses in the structure before the vessel is put into service. Hydrostatic testing is widely used in industries like oil and gas, plumbing, and manufacturing to ensure safety and compliance with regulations.

What are the key skills and qualifications needed to thrive in a hydrostatic testing technician role?

To thrive as a Hydrostatic Testing Technician, you need a solid understanding of pressure testing procedures, safety protocols, and relevant industry standards, usually supported by a technical diploma or equivalent experience. Familiarity with pressure gauges, pumps, data logging systems, and certifications such as OSHA or NACE is commonly required. Attention to detail, problem-solving skills, and strong communication abilities help ensure accurate test results and safe operations. These skills and qualifications are crucial for maintaining system integrity, preventing failures, and ensuring compliance with safety and regulatory requirements.

What are some common challenges faced by professionals during hydrostatic testing, and how can they be effectively managed?

Professionals conducting hydrostatic testing often encounter challenges such as maintaining precise pressure levels, ensuring the integrity of testing equipment, and accurately detecting leaks. Environmental factors like temperature fluctuations and equipment compatibility can affect test results. Effective management involves thorough pre-test inspections, using calibrated instruments, following standardized procedures, and maintaining clear communication with team members to promptly address any irregularities during testing. Continuous training and adherence to safety protocols are also critical for minimizing risks and ensuring reliable outcomes.

What is the difference between Hydrostatic Testing vs Pipe Fitter?

AspectHydrostatic TestingPipe Fitter
CertificationsASME, API, state-specific licensesPipefitting certifications, OSHA safety training
Work EnvironmentIndustrial plants, pipelines, pressure vesselsConstruction sites, industrial facilities, piping systems
Job FocusTesting pressure integrity of vessels and pipelinesAssembling, installing, and maintaining piping systems

Hydrostatic Testing and Pipe Fitters often work in industrial settings, requiring similar safety certifications. Hydrostatic Testing focuses on pressure testing equipment, while Pipe Fitters specialize in installing and maintaining piping systems. Both roles are essential in industries like oil and gas, manufacturing, and construction.

What is a hydrostatic testing job?

Hydrostatic testing involves using water to pressurize oil and gas pipelines, sprinkler systems, plumbing and tanks, sewer systems, and similar structures to test for leaks and assess structural integrity. Jobs in hydrostatic testing include working as a pipefitter or inspector, but you can also become a technician or an operator. In these roles, your duties include calibrating and performing pressure tests, inspecting and repairing lines and systems, and assisting with routine maintenance. Additionally, these jobs have responsibilities related to safety compliance, reporting defective parts and equipment, and working from both written and oral instructions, so good communication skills and the ability to pay attention to detail are important.

More about Hydrostatic Testing jobs
What are the most commonly searched types of Hydrostatic Testing jobs in Texas? The most popular types of Hydrostatic Testing jobs in Texas are:
What are popular job titles related to Hydrostatic Testing jobs in Texas? For Hydrostatic Testing jobs in Texas, the most frequently searched job titles are:
What job categories do people searching Hydrostatic Testing jobs in Texas look for? The top searched job categories for Hydrostatic Testing jobs in Texas are:
What cities in Texas are hiring for Hydrostatic Testing jobs? Cities in Texas with the most Hydrostatic Testing job openings:
Hydrostatic Testing jobs near you
Infographic showing various Hydrostatic Testing job openings in Texas as of August 2026, with employment types broken down into 100% Full Time. Highlights an 100% In-person job distribution.

Hydroblaster Technician

Clean Harbors

Deer Park, TX • On-site

$16.50 - $22.75/hr

Full-time

Re-posted 9 days ago

Clean Harbors rating

7.0

Company rating: 7.0 out of 10

Based on 153 frontline employees who took The Breakroom Quiz

42nd of 90 rated recycling and waste

Job description

Hydroblast Technicians
 
Please join us on Friday, March 6th from 8am - 12pm at 900 Georgia Ave. Deer Park, TX 77536. Please bring a copy of your resume, valid driver's license and your TWIC Card (or receipt).
 
HPC-Industrial, powered by Clean Harbors, is looking for HydroBlaster/Field Technicians to work at various customer locations, and to join their safety conscious team! This team member is responsible for the successful execution of setting up and assisting with water treatment systems, pipeline hydrostatic testing and various other responsibilities. The HydroBlaster/Field Technician serves as representative of HPC-Industrial in creating a continuous working relationship with clients/customers.  Transitioning Military, this is a great opportunity to leverage your skills and training as you return to civilian life.  

Key Responsibilities:    
  • Ensures Health and Safety is the number one goal by following policies, processes, and acting in a safe manner at all times. 
  • Hands-on operation of manual and automated Hydro blasting equipment.
  • Operation of special equipment, such as Ultra High-Pressure pumps.
  • Operate equipment by energizing the pumping equipment and/or any specialized Hydroblasting and/or Chemical cleaning equipment, vacuum trucks and cutting equipment being used on the job.
  • May be required to examine surface cleaned to ensure conformance to company and customer expectations. 
  • Conduct routine and required maintenance on the unit and all peripherals, including industrial vacuuming equipment and the disposal of hazardous and non-hazardous materials.
  • Perform routine maintenance on company equipment being used on the job.
  • Additional duties as assigned.  
 
Qualifications:
  • Specific vocational preparation including classroom safety training, on-the-job training and essential experience gained on other jobs. 
  • Language proficiency: understand English at a level to comprehend safety training and respond to instructions in emergency situations.
  • Valid driver license and other requirements of company’s driving policy required when driving company vehicle or using personal vehicle on company business.
  • OSHA certification may be required for this job. 
  • Must be knowledgeable in the operation of emergency equipment, such as fire extinguishers.
  • May have to provide Federal Transportation Workers Identification Credential (TWIC). 

What Clean Harbors employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Clean Harbors logo

About Clean Harbors

Sourced by ZipRecruiter

Clean Harbors is North America’s leading provider of environmental and industrial services. The Company serves a diverse customer base, including a majority of Fortune 500 companies. Its customer base spans a number of industries, including chemical, and manufacturing, as well as numerous government agencies. These customers rely on Clean Harbors to deliver a broad range of services such as end-to-end hazardous waste management, emergency spill response, industrial cleaning and maintenance, and recycling services. Through its Safety-Kleen subsidiary, Clean Harbors also is North America’s largest re-refiner and recycler of used oil and a leading provider of parts washers and environmental services to commercial, industrial and automotive customers. Founded in 1980 and based in Massachusetts, Clean Harbors operates throughout the United States, Canada, Mexico and Puerto Rico.

Industry

Environmental consulting services

Company size

10,000+ Employees

Headquarters location

Norwell, MA, US

View All Clean Harbors Jobs