1

Hydronic Jobs in Texas (NOW HIRING)

Engineer

Dallas, TX · On-site

$60 - $80/hr

In this exciting role, you'll play a key role in all phases of mechanical, plumbing, hydronics, and low-voltage system design. You will be a part of creating a diverse range of projects, including ...

Be Seen First

That means load calculations, equipment selections, hydronic system modeling, ductwork and piping sizing -- the full scope. You won't be reviewing someone else's work; you'll be producing it. If you ...

Cooling towers, pumps, and hydronic piping systems * Boilers, burners, and steam systems * Packaged rooftop units (RTUs) and air handling units (AHUs) * VAV systems, fan coil units, and building ...

Hydronic Systems & Balancing Own hydronic system installation and balancing: pumps, valves, strainers, and controls interfaces. Verify flow, pressure, and temperature performance against design ...

Engineer

Houston, TX · On-site

$60 - $80/hr

In this exciting role, you'll play a key role in all phases of mechanical, plumbing, hydronics, and low-voltage system design. You will be a part of creating a diverse range of projects, including ...

Design Engineer

Austin, TX · On-site

$100 - $125/hr

This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.

Hydronic Systems & Balancing Own hydronic system installation and balancing: pumps, valves, strainers, and controls interfaces. Verify flow, pressure, and temperature performance against design ...

Hydronic Systems & Balancing Own hydronic system installation and balancing: pumps, valves, strainers, and controls interfaces. Verify flow, pressure, and temperature performance against design ...

Hydronic Systems & Balancing Own hydronic system installation and balancing: pumps, valves, strainers, and controls interfaces. Verify flow, pressure, and temperature performance against design ...

Perform basic control wiring or RTUs, Split systems, VRF, and hydronic systems. Including applicable accessories such as duct smoke detectors, economizers and powered exhaust. * Perform thorough ...

Mechanical - HVAC

Denton, TX · On-site

$60 - $80/hr

Hydronic rack cooling (Deschutes) maintenance and commissioning * PMs on HVAC and Hydronic systems (Pumps, Strainers,Cooling Towers, etc.) * Team scheduling and material requisition * Contribute to ...

Hydronic Systems & Balancing Own hydronic system installation and balancing: pumps, valves, strainers, and controls interfaces. Verify flow, pressure, and temperature performance against design ...

Showing results 21-40

Hydronic information

What is a hydronic?

A hydronic job involves working with heating and cooling systems that use water or other liquids to regulate temperature. Professionals in this field design, install, maintain, and repair systems such as boilers, radiators, and underfloor heating. These jobs often require knowledge of plumbing, HVAC systems, and energy efficiency principles. Hydronic technicians work in residential, commercial, and industrial settings to ensure optimal system performance.

What are the typical daily responsibilities of a hydronic?

As a Hydronic professional, your daily tasks often include installing, maintaining, and repairing hydronic heating or cooling systems, inspecting system components, and troubleshooting performance issues. You may work on both residential and commercial sites, collaborating with HVAC teams, plumbers, and general contractors to ensure proper integration within building systems. Routine responsibilities also involve system testing, adjusting system pressures and temperatures, and maintaining compliance with safety codes and standards. Effective communication with clients and coworkers is essential to deliver top-notch service and resolve any concerns. This role offers a mix of hands-on technical work and teamwork, providing variety and opportunities for skill development.

What are the key skills and qualifications needed to thrive in a hydronic position, and why are they important?

To thrive as a Hydronic technician or specialist, you need a solid understanding of hydronic heating and cooling systems, plumbing fundamentals, and relevant HVAC expertise, typically backed by vocational training or technical certification. You should be familiar with tools such as pipe threading machines, pressure testing equipment, and digital controls, as well as certifications like EPA Section 608 or equivalent in HVAC. Strong problem-solving skills, attention to detail, and effective communication are key soft skills for this role. These competencies ensure safe, efficient system installation and maintenance as well as satisfied clients and effective teamwork.

What are the most commonly searched types of Hydronic jobs in Texas?

The most popular types of Hydronic jobs in Texas are:

What are popular job titles related to Hydronic jobs in Texas?

For Hydronic jobs in Texas, the most frequently searched job titles are:

What job categories do people searching Hydronic jobs in Texas look for?

The top searched job categories for Hydronic jobs in Texas are:

Infographic showing various Hydronic job openings in Texas as of September 2026, with employment types broken down into 1% As Needed, 89% Full Time, 2% Part Time, 2% Temporary, 5% Contract, and 1% Nights. Highlights an 93% Physical, 4% Hybrid, and 3% Remote job distribution.

Commercial HVAC Senior Service Technician

System One

Houston, TX • On-site

$40 - $55/hr

Contractor

Medical, Dental, Vision, Life, Retirement

Posted 7 days ago


Job description

Job Title: Commercial HVAC Senior Service Technician Location: Houston, TX Type: Direct Hire Compensation: $40-55/hr Overview System One is seeking a Senior Service Technician to support commercial and industrial mechanical service operations across the Houston market. This position is intended for an experienced, field-ready technician who can diagnose, repair, stabilize, document, and close out complex service work with minimal supervision while representing our client professionally with customers, dispatch, service management, and fellow technicians. The ideal candidate has strong commercial HVAC and mechanical service experience, understands union field expectations, and can work within our clients service standards for readiness, field verification, safe execution, complete documentation, customer communication, and sell-forward opportunity identification

Responsibilities

  • Run commercial and industrial service calls from dispatch through closeout with limited supervision.
  • Confirm mission, customer expectations, equipment, access, safety requirements, and expected outcome before committing labor.
  • Perform safe arrival, site verification, diagnostic work, repair, stabilization, testing, and customer communication.
  • Document actual hours, work performed, parts used, readings, photos, customer communication, recommendations, and final disposition clearly enough for billing, follow-up, and future service history.
  • Diagnose and service rooftop units, split systems, air handlers, chilled water systems, hydronic heating systems, pumps, motors, fans, VFDs, controls, and related commercial mechanical equipment.
  • Use structured root-cause diagnostics including airflow, electrical, refrigeration, water flow, controls, pressure, temperature, and operating-sequence verification.
  • Interpret readings such as superheat, subcooling, amp draw, voltage, temperature split, delta-T, pressure differential, flow indicators, VFD fault history, and BAS/control signals where applicable.
  • Support maintenance contract work by identifying failure indicators, recurring issues, safety concerns, and appropriate follow-up recommendations.
  • Troubleshoot chilled water, condenser water, pumps, cooling towers, heating hot water, boilers, hydronics, steam/condensate exposure, and other systems.
  • Evaluate system performance issues such as low delta-T, poor heat rejection, high head pressure, unstable flow, and control-sequence concerns.
  • Read wiring diagrams and trace control circuits safely and methodically.
  • Separate mechanical issues from control, electrical, BAS, sensor, actuator, interlock, permissive, drive, or motor/load issues.
  • Follow safe work practices including PPE, LOTO, electrical safety, roof access, ladder safety, hot work awareness, confined space awareness, and customer site rules.
  • Stop work, communicate, document, and escalate when conditions are unsafe or outside authorization.
  • Mentor junior technicians through good diagnostic sequence, safe practices, documentation quality, and professional customer communication.
  • Explain technical conditions to facility managers and customer contacts in clear, practical language.
  • Document deficiencies, risk, customer impact, urgency, photos, readings, and recommended next actions without pressure selling or unsupported commitments.
  • Route quote-needed, return-needed, manager-review, warranty-review, and approval-needed items for quick action by service management.

Requirements

  • Current or eligible union status through Local 211, as applicable to the position and work jurisdiction.
  • Proven commercial or industrial mechanical service experience, preferably in HVAC, mechanical service, refrigeration, hydronics, controls, or related building systems.
  • Ability to perform independent troubleshooting, complete routine and complex service work, and know when to escalate.
  • Working knowledge of electrical troubleshooting, safe meter use, wiring diagrams, controls, safeties, relays, contactors, motors, and VFD basics.
  • Ability to diagnose airflow, refrigeration, heating, hydronic, pump, fan, and mechanical performance problems using readings and a logical sequence.
  • Ability to document service calls with clear notes, readings, photos, customer communication, parts/materials, and final disposition.
  • Valid driver license and acceptable driving record for field service assignment.
  • Ability to participate in on-call or after-hours emergency service rotation as required.
  • Commitment to safety, professionalism, customer service, and team-first field behavior.

Preferred

  • EPA certification and OSHA 10 or OSHA 30.
  • Experience with BAS/controls, VRF/VRV systems, chilled water or central plant systems, boilers/hydronics, cooling towers, steam/condensate, commercial plumbing/piping, or refrigeration systems.
  • Experience mentoring apprentices, junior technicians, or newer service technicians.
  • Experience supporting maintenance contracts, recurring service accounts, commercial facilities, industrial sites, hospitals, schools, property management, or critical facilities.
  • Experience with service software, tablet-based documentation, photos, readings, and customer-facing work order closeout.

What Defines Success in This Role?

  • Completes service calls with safe execution, accurate diagnosis, clear communication, and clean closeout documentation.
  • Reduces callbacks by using root-cause thinking, final verification, and disciplined repair/testing practices.
  • Supports first-time completion by reviewing readiness, parts, tools, history, customer access, and safety before work begins.
  • Turns field observations into actionable recommendations without pressure selling or unsupported commitments.
  • Builds customer trust through professionalism, transparency, practical technical explanations, and follow-through.
  • Helps raise the capability of the service team by coaching junior technicians and modeling company standards.

System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan.

System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 #LI-JB1

Ref: #260-Eng NY Transit


System One logo

About System One

Sourced by ZipRecruiter

System One helps employers get work done more efficiently and economically without compromising quality. Over our 35+ year history, we've helped connect thousands of talented people with innovative companies. The excitement of a perfect fit motivates us every single day.

Industry

Business consulting services and recruiting and staffing services

Company size

5,001 - 10,000 Employees

Headquarters location

Pittsburgh, PA, US