1

Grading Operator Jobs in Boise, ID (NOW HIRING)

Experience with the practices and procedures involved in handling and rotating large containers while operating a forklift Good knowledge of: * Federal and State grading procedures and standards

Typical responsibilities include grading and drainage design for new building sites, renovations ... S. operating company of WSP, one of the world's leading engineering and professional services firms.

Typical responsibilities include grading and drainage design for new building sites, renovations ... S. operating company of WSP, one of the world's leading engineering and professional services firms.

INSPECTOR 2 CALDWELL

Caldwell, ID ยท On-site

$17.45/hr

Shipping Point Inspection and Grading. Select appropriate number of representative samples ... operating condition; review shipping manifest and verify product variety, grade listed and type and ...

Lead Civil Engineer

Meridian, ID ยท On-site

$102K - $160K/yr

Typical responsibilities include grading and drainage design for new building sites, renovations ... S. operating company of WSP, one of the world's leading engineering and professional services firms.

Senior Civil Engineer - Industrial

Meridian, ID ยท On-site

$115K - $170K/yr

Typical responsibilities include grading and drainage design for new building sites, renovations ... S. operating company of WSP, one of the world's leading engineering and professional services firms.

Senior Lead Substation Project Engineer

Boise, ID ยท On-site

$119.60 - $213.20/hr

... operating permits. * Develop construction plans, specifications, and cost estimates; preparing ... grading, drainage, pavement design, specifications, building materials, phasing, and construction ...

Senior Lead Substation Project Engineer

Meridian, ID ยท On-site

$93K - $121K/yr

... operating permits. * Develop construction plans, specifications, and cost estimates; preparing ... grading, drainage, pavement design, specifications, building materials, phasing, and construction ...

Lead Professional, Electrical Engineering

Meridian, ID ยท On-site

$150K - $157K/yr

Plan and incorporate future-ready techniques, concept development, operating strategies, and ... site development, grading, drainage, equipment layout, elevations, specifications, building ...

We are a highly collaborative team of builders and operators who invent new ways of working in an ... Participate in calibration sessions to ensure consistency in grading and auditing practices.

Showing results 21-39

Grading Operator information

See Boise, ID salary details

$13

$22

$32

How much do grading operator jobs pay per hour?

As of Aug 22, 2026, the average hourly pay for grading operator in Boise, ID is $22.57, according to ZipRecruiter salary data. Most workers in this role earn between $18.51 and $25.62 per hour, depending on experience, location, and employer.

What does a grading operator do?

A Grading Operator is responsible for operating machinery that sorts, classifies, or grades products based on size, weight, quality, or other criteria. This role is commonly found in industries like agriculture, food processing, and manufacturing. Grading Operators monitor equipment, ensure accurate sorting, and may also perform basic maintenance or troubleshooting. Their work helps ensure that products meet required standards before they move on to the next stage of production or distribution.

What are the key skills and qualifications needed to thrive as a grading operator, and why are they important?

To thrive as a Grading Operator, you need a solid understanding of heavy machinery operation, site grading techniques, and typically a high school diploma or equivalent. Familiarity with equipment such as bulldozers, graders, and GPS or laser-guided control systems is often required. Attention to detail, strong communication, and the ability to work well in a team are valuable soft skills in this role. These competencies ensure safe, precise, and efficient site preparation crucial for construction and infrastructure projects.

What are some common challenges grading operators face, and how can they overcome them?

Grading Operators often encounter challenges such as maintaining accuracy under time pressure and adapting to changing production demands. Staying focused and adhering to quality standards is crucial, as even small errors can impact the final product. Many Grading Operators find it helpful to develop strong attention to detail and communicate regularly with team members to address any issues promptly. Ongoing training and familiarity with grading equipment also play an important role in overcoming these challenges and ensuring efficient workflow.

What is the difference between Grading Operator vs Quality Control Inspector?

AspectGrading OperatorQuality Control Inspector
Required CredentialsHigh school diploma, training in grading standardsHigh school diploma, quality assurance training
Work EnvironmentFactories, processing plants, manufacturing linesFactories, inspection stations, manufacturing facilities
Employer & Industry UsageFood, agricultural, or commodity industriesManufacturing, food processing, industrial sectors
Common Search & ComparisonOften compared for roles in product evaluation and sortingCompared for roles focused on quality assurance and defect detection

The main difference is that a Grading Operator primarily assesses and sorts products based on quality standards, while a Quality Control Inspector focuses on inspecting products for defects and ensuring compliance with quality specifications. Both roles are essential in manufacturing and processing industries but serve different functions in maintaining product standards.

What kind of companies hire grading operators?

Grading operators are typically hired by companies involved in agriculture, food processing, or manufacturing industries that require sorting and grading of products such as produce, meat, or other goods. These companies often operate in environments where attention to detail and knowledge of grading standards are essential, and they may require familiarity with grading tools or machinery.

What are popular job titles related to Grading Operator jobs in Boise, ID?

For Grading Operator jobs in Boise, ID, the most frequently searched job titles are:

What job categories do people searching Grading Operator jobs in Boise, ID look for?

The top searched job categories for Grading Operator jobs in Boise, ID are:

Infographic showing various Grading Operator job openings in Boise, ID as of August 2026, with employment types broken down into 15% As Needed, 55% Full Time, 15% Part Time, and 15% Temporary. Highlights an 100% In-person job distribution, with an average salary of $46,950 per year, or $22.6 per hour.

Temporary Harvest Inspector- Caldwell

LUMA

Caldwell, ID โ€ข On-site

$16.45/hr

Part-time

Posted 23 days ago


Job description

Temporary Harvest Inspector
Applications will be accepted through 11:59 PM MST on the posting end date.
"Serving consumers and agriculture by safeguarding the public, plants, animals and the environment through promotion, education and regulation."
The Idaho State Department of Agriculture is currently recruiting for temporary, non-benefited Inspector 1 positions for harvest in the Agricultural Inspections division in the Caldwell area.
Although the dates may vary based on the needs of the harvest season, these positions will start approximately between August and run through approximately late October. Temporary Inspectors 1 are employed on a seasonal basis and will be subject to irregular hours and shift work.
SPECIAL NOTIFICATION: This non-classified position is exempt from classified state service and the rules of the Division of Human Resources and the Idaho Personnel Commission.
This position does not have benefits.
Referred lists will be pulled periodically. Apply as soon as possible to ensure you are considered for this position.
GENERAL INFORMATION
Incumbents in these positions work in a high-volume production setting until all samples are processed. Work involves exposure to extreme cold and heat, wet and humid environments, dust, dirt, exhaust fumes, poorly ventilated areas, noise and odors. Work requires standing for prolonged periods. Incumbents must communicate effectively while exercising tact and diplomacy and work independently with minimal supervision. Incumbents must keep the work area in safe condition and report any hazards to supervisors. May involve irregular work hours, (partial days and/or long hours), days and times and a rotation to multiple locations. Incumbents will receive on-the-job training in proper sampling and safety procedures. Personal protective equipment may be required. Depending on the facility, incumbents may be required to purchase protective shoes and/or wear ear protection, hard hats, safety glasses, etc.
Example of Duties
General duties may include the following:
Forklift operating: Operate forklift to stage sample containers for inspection. With forklift, unload incoming samples from trucks; move containers to inspection station and place in production states by date and lot number; maintain awareness of flow of samples through inspection station, and select next appropriate sample according to date and lot number; remove and relocate empty containers; perform minor maintenance on forklifts; assist inspectors by physically lifting heavy items. May require maneuvering a forklift to loading docks across heavy traffic, around cramped, crowded plants, and over drainage gratings and slick floors inside the inspection station; perform related duties as required.
Grading/Raw Lab Technician: Simultaneously work with a crew of graders to examine product externally and internally according to standards pertaining to size, shape, varietal characteristics, appearance and degree of imperfection using visual inspection, paring knives, small scales and size rings; place commodities in bins by grades and unusable portions; answer questions from new graders on grading procedures and grading decisions; be responsible for accurately determining the grade of commodities for all lots or loads specified for inspection; assign initial grade to commodities according to Federal and State standards and contract specifications; sample commodity to determine the raw product's attributes; complete equipment maintenance and sanitation duties; enter testing data into proprietary database. Incumbent may be rotated on an as needed basis between internal and external grading assignments; perform related duties as required.
Sampling: Use sample tray or automatic sampling apparatus to take appropriate number of samples according to size of bulk load; follow specific sampling procedures to minimize product damage and to ensure accuracy of sample; place appropriate number of samples in composite sample container; label container by date and contract number and attach identification tags; seal container to ensure sample integrity; may assist in contract or dockside inspection by lifting and weighing samples; record sample weights on note sheets; some positions may be required to place sub-samples in sacks which may weigh up to 100 pounds then carry sacks to pallets.
Auditing: Drive to various, sometimes remote, locations; conduct an opening meeting with the auditee; review auditee's food safety plan; use appropriate checklist to interview the auditee and the auditee's employees to determine adherence to their plan, to the checklist/audit scheme requirements and their risk analysis, logs, test results, training records and/or other documentation; tour the fields, storage buildings, and/or packing facilities; document findings; note and explain non-conformances; write Corrective Action Reports (CAR); conduct a closing meeting, review findings, answer questions, and leave CARs; digitally enter and submit the audit to the Ag. Program Manager for review; perform related duties as required.
Other duties as assigned.
Minimum Qualifications
These qualifications are mandatory requirements. Any combination of ability, education, training or experience that demonstrates competence in each of the following:
  • With or without reasonable accommodation, physical ability to:
  • Stand for prolonged periods of time
  • Work in extreme cold and heat, wet and humid environments around dirt, fumes, poorly ventilated areas, noise and odors
  • Collect, lift and carry samples weighing up to 35 pounds
  • Intermittently bend, squat, twist and reach above shoulder level
  • Pass a color test
  • Have sufficient vision, touch and balance to perform the inspection and grading duties
  • Manual dexterity includes the ability to toss, pull, push, lift, carry, and cut commodities

Ability to:
  • Follow written and verbal instructions and accurately complete time sheets and other required documentation
  • Write or print neatly and legibly
  • Verify and copy information
  • Perform basic math computations (add and subtract) and count accurately
  • Must be able to read and write in English
  • Within one month of hire, obtain and retain an Inspector Aide license from USDA
  • Within two months of hire, obtain and retain a USDA FV-200(acquired with on-the-job training and evaluation)

Supplemental Information
DESIRABLE AREAS: These qualifications are not required; however, they are desired in a candidate.
  • Ability to collect, lift, carry, and push/pull heavy objects weighing up to 80 pounds
  • Ability to explain grading procedures to others
  • Demonstrated ability to identify various internal and external defects
  • Experience with the practices and procedures involved in handling and rotating large containers while operating a forklift

Good knowledge of:
  • Federal and State grading procedures and standards
  • Various grades and their requirements

Thank you for your interest in the Department of Agriculture!
If you have questions,
Please contact us at:
jobs@isda.idaho.gov or at (208) 332-8520
EEO/ADA/Veteran's Preference
The State of Idaho is committed to providing equal employment opportunities and prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities and prohibit discrimination against all individuals based on their race, color, religion, political affiliation or belief, sex, national origin, genetics, or any other status protected under applicable federal, state, or local laws.
The State of Idaho is committed to access and reasonable accommodation for individuals with disabilities, auxiliary aids and services are available upon request. If you require an accommodation at any step in our recruitment process, you are encouraged to contact (208) 334-2263 (TTY/TTD: 711), or emailada.coordinator@dhr.idaho.gov.
Preference may be given to veterans who qualify under state and federal laws and regulations.

Luma logo

About Luma

Sourced by ZipRecruiter

Industry

Arts, entertainment, and recreation

Company size

201 - 500 Employees

Headquarters location

Santa Monica, CA, US

Year founded

2002