1

Gom Inspect Jobs (NOW HIRING)

Inspections : * Perform daily 'walk-about' inspections of the site to ensure safe practices and identify hazards. * Review discrepancies with Operator and/or contractor representatives. * Observe ...

Inspections : * Perform daily 'walk-about' inspections of the site to ensure safe practices and identify hazards. * Review discrepancies with Operator and/or contractor representatives. * Observe ...

- Manager Electrical Services, GoM Business Title: Department or Business Unit: Supervisory ... Training activities and electrical inspections. * Lead the GES Team to coordinate and undertake ...

Quality Inspector

Colorado Springs, CO · On-site

$48.10K - $86.95K/yr

Inspect machined components and assemblies. * Identify and document nonconformance and support root ... Operate standard inspection and measuring equipment, CMMs, and GOM Scanning Equipment against tight ...

Quality Inspector

Colorado Springs, CO · On-site

$48.10K - $86.95K/yr

Inspect machined components and assemblies. * Identify and document nonconformance and support root ... Operate standard inspection and measuring equipment, CMMs, and GOM Scanning Equipment against tight ...

Inspections : * Perform daily 'walk-about' inspections of the site to ensure safe practices and identify hazards. * Review discrepancies with Operator and/or contractor representatives. * Observe ...

Perform inspections utilizing engineering drawings, standard procedures, calibrated manual gages ... Use metrology Scanners, such FARO, Romer, Creaform C‑Track, MetraSCAN, GOM ScanBox, to acquire ...

Inspection Technician

Torrance, CA · On-site

$36 - $50/hr

Perform inspections utilizing engineering drawings, standard procedures, calibrated manual gages ... Use metrology Scanners, such FARO, Romer, Creaform C-Track, MetraSCAN, GOM ScanBox, to acquire ...

Perform Required Inspection Items (RII) in accordance with the General Operations Manual (GOM ... Inspect aircraft, components, and logbook entries to ensure regulatory compliance. * Verify correct ...

The GOM sits within the Special Air Missions (SAM) Group and reports to the Head of Maintenance ... Perform periodic inspections, audits, and monitoring programmes to ensure compliance with ...

Inspect machined components and assemblies. * Identify and document nonconformance and support root ... Operate standard inspection and measuring equipment, CMMs, and GOM Scanning Equipment against tight ...

Inspect machined components and assemblies. * Identify and document nonconformance and support root ... Operate standard inspection and measuring equipment, CMMs, and GOM Scanning Equipment against tight ...

Inspect machined components and assemblies. * Identify and document nonconformance and support root ... Operate standard inspection and measuring equipment, CMMs, and GOM Scanning Equipment against tight ...

Inspect (GOM ATOS) * Keyence * OGP Travel Requirements: * Up to 10% as needed (interstate travel to customer site in Oklahoma City) Thanks & Regards Zaheer Ahmed Lead- Associate Recruiting zahmed ...

next page

Showing results 1-20

Gom Inspect information

See salary details

$8

$46

$144

How much do gom inspect jobs pay per hour?

As of May 30, 2026, the average hourly pay for gom inspect in the United States is $46.26, according to ZipRecruiter salary data. Most workers in this role earn between $15.14 and $40.14 per hour, depending on experience, location, and employer.

What are the key skills and qualifications needed to thrive as a GOM Inspect Specialist, and why are they important?

To thrive as a GOM Inspect Specialist, you need a strong background in metrology, 3D scanning, and quality control, typically supported by relevant engineering or technical education. Familiarity with GOM Inspect software, 3D measurement systems, and CAD platforms is crucial for analyzing and interpreting data. Attention to detail, problem-solving skills, and effective communication are vital soft skills for ensuring precise inspections and collaborating with cross-functional teams. These skills and qualities are essential to deliver accurate measurement results, maintain product quality, and drive improvements in manufacturing processes.

What are the typical responsibilities and daily tasks of a GOM Inspect specialist?

A GOM Inspect specialist is primarily responsible for operating 3D scanning equipment and using GOM Inspect software to analyze and interpret measurement data. Daily tasks include setting up scanning systems, capturing precise data from physical objects, performing data evaluation, and preparing detailed inspection reports. They often collaborate closely with quality engineers and production teams to ensure parts meet design specifications and industry standards. Additionally, troubleshooting equipment and optimizing workflows for efficiency are common aspects of the role. Staying up-to-date with the latest features of GOM Inspect software and best practices is also important for success in this position.

What is a GOM Inspect specialist?

A GOM Inspect specialist is a professional who uses GOM Inspect software to analyze and evaluate 3D measurement data in quality control and inspection processes. GOM Inspect is widely used in industries such as automotive, aerospace, and manufacturing for tasks like dimensional analysis, inspection, and reporting. Specialists operate the software to compare CAD models with scanned data, generate detailed inspection reports, and ensure products meet design specifications. Their expertise helps improve product quality and streamline production processes.

What is the difference between Gom Inspect vs Quality Control Inspector?

AspectGom InspectQuality Control Inspector
CertificationsTypically requires knowledge of 3D metrology software and inspection standardsOften requires certifications like ASQ CQI or specific industry standards
Work EnvironmentPrimarily software-based, working in offices or on-site for data collectionHands-on inspection in manufacturing or production facilities
Industry UsageUsed across manufacturing, aerospace, automotive for digital inspectionCommon in manufacturing, construction, and quality assurance roles

Gom Inspect is a software tool used for 3D inspection and metrology, focusing on digital analysis. In contrast, a Quality Control Inspector performs physical inspections and uses various tools to ensure product quality. While Gom Inspect requires technical software skills, Quality Control Inspectors often need certifications and hands-on experience. Both roles are essential in manufacturing but serve different functions within the quality assurance process.

More about Gom Inspect jobs
What cities are hiring for Gom Inspect jobs? Cities with the most Gom Inspect job openings:
What states have the most Gom Inspect jobs? States with the most job openings for Gom Inspect jobs include:
Infographic showing various Gom Inspect job openings in the United States as of May 2026, with employment types broken down into 100% Full Time. Highlights an 87% In-person, and 13% Remote job distribution, with an average salary of $96,229 per year, or $46.3 per hour.
Offshore Paramedic (GOM)

Offshore Paramedic (GOM)

Total Safety U.S., Inc.

Pasadena, TX • On-site

Full-time

Posted 20 days ago


Total Safety rating

6.5

Company rating: 6.5 out of 10

Based on 24 frontline employees who took The Breakroom Quiz

26th of 32 rated health and safety providers


Job description

Job Description: Total Safety is looking for an Offshore Paramedic to add to their safety conscious team. The Offshore Paramedic responds to Emergency situations; staying within the requirements and restrictions of level of training at all times. Administers the best treatment and follow-up plan possible for all Emergency and Non-Emergency Medical situations as they arise. Assists in identifying hazards and assessing the risks and planning practical and effective solutions towards safe working practices in compliance with client’s standards. About Total Safety Total Safety is the world's premier provider of integrated safety and compliance services and the products necessary to support them, including gas detection, respiratory protection, safety training, fire protection, compliance and inspection, industrial hygiene, onsite emergency medical treatment/paramedics, communications systems, engineered systems design, and materials management. Our Core Values are People, Safety & Wellbeing, Accountability, Responsibility, Empowerment, Honesty, Transparency, and Integrity. Medical: Responds to Emergencies; staying within the requirements and restrictions of level of training at all times. Administers the best treatment and follow-up plan possible for all Emergency and Non-Emergency Medical situations as they arise. Assists in identifying hazards and assessing the risks and planning practical and effective solutions towards safeworking practices in compliance with client’s standards. Safety: Facilitate compliance with occupational health and safety standards and guidelines. Provide advice on measures to minimize hazards or unhealthy situations. Continuous monitoring for violations and potential hazards on location, or performing risk assessments. The required work will largely focus on prevention and risk assessments. The ideal candidate will also be detail oriented and ready to act in emergencies. The goal is to establish a safe workplace according to legal standards and foster a culture of attention to health and safety. Essential Job Functions Medical:Administers the best treatment and follow-up plan for sick and injured (emergency and non-emergency) personnel according to established medical protocols; staying within the requirements and restrictions of level of training at all times.Provides both basic and advanced life support, including comprehensive patient assessment, invasive airway management, cardiac monitoring and administration of medications.Completes extensive written documentation on patient condition and treatment provided.Follows HIPAA privacy guidelines and Total Safety policies & procedures.Maintains accurate patient records for all patients for emergency or non-emergency care. Maintains direct contact with TS Medical Director in all cases.Maintains medical supply inventory to assure proper levels for patient care. Maintains a current copy of Total Safety Medical Guidelines on location. Maintains narcotics under controlled security.Cleans all equipment following appropriate disinfecting procedures. Decontaminates treatment area and equipment after treatment of a patient with contagious infection or hazardous materials exposure. Disposes of medical andhazardous waste according to established procedures. Teaches First Aid / CPR classes as needed by site supervisor. May teach other safety related classes if certified and as required. Safety: Orientation of All Personnel Visiting the Site: Review Operator/Contractor’s General Safety Rules.Have Personnel sign a copy of the General Safety Rules and file this document. Inform personnel of onsite emergency procedures and well site evacuation plan. Review Operator/Contractor’s contraband policies (firearms, ammunition, drugs, and alcohol). Review prescription/non-prescription drug policy (if applicable). Go over any prohibited medications and/or restricted medications. Review drug container policy for prescription drugs. Document any drugs brought onto location and file these documents. Procure doctor’s release forms for any prescription drugs (if required) and file these documents.Check to ensure personnel have proper PPE (head, eye, foot & ear protection). Check to ensure personnel have proper fall protection PPE, if needed.Review JSA policy with all personnel.Make sure personnel have a current JSA for the task(s) they will perform. Instruct personnel in JSA preparation procedures if they need help. Review ‘Short Service Employee’ policy with all effected personnel. Identify any SSE’s and make sure they have any applicable SSE form filled out. Make sure all SSE’s have an assigned mentor and file their SSE forms.Review Operator/Contractor’s Hazard Communications program with all personnel. Inform personnel of location of SDS books. Procure SDS sheets from visitors who are bringing chemicals onto site. Safety Meetings at the Site:Attend and participate in all pre-task safety meetings conducted on site (where duties allow). Ensure that documentation of these meetings is completed and filed.Attend and participate in all weekly safety meetings for the Operator and/or the drilling contractor. Document these meetings and file documents. Scribe the minutes from these meetings and maintain a file of the same. Review any ‘Safety Bulletins’ & contractor safety notices in meetings.Attend and participate in all pre-tour safety meetings. Document these meetings. Provide reference material for these meetings (JSA’s, procedures from safety manuals, etc.) Job Safety Analysis:Perform periodic JSA audits to verify compliance with the JSA’s. Enter audits into our computer program (associated with the appropriate JSA’s). Track problems noted in these audits for possible unsafe trends. Incidents and Incident Analysis:In conjunction with Operator & Contractor reps, prepare a ‘Root Cause Analysis’ of all incidents reflecting all digital documents, pictures, and applicable information pertaining to the incident. Collect any ‘Safety Initiatives’ submitted by personnel on site and maintain digitally. Hazard Communication:Assure the presence of SDS sheets for all chemicals on site. Inspections:Perform daily ‘walk-about’ inspections of the site to ensure safe practices and identify hazards. Review discrepancies with Operator and/or contractor representatives. Observe work crews while performing non-routine tasks for safe work habits and procedures. Perform periodic audits of task performance and JSA adherence.Assist contractor rep in performing periodic inspections of the site to ensure compliance with OSHA.Document these in depth inspections and file properly. Environmental:Assist the contractor’s rep in monitoring the site for chemical spills, upsets, overflows, etc.Performs health and hygiene inspections as required by customer. Assists in accident investigation and reporting as required by customer. Advises site supervisor of any trends in health problems and/or medical cases which may indicate food, water or air quality problems. Consults with supervisorypersonnel and individual workers concerning disease control programs, vaccination programs, and general health/medical questions as they arise.Assists with special projects as assigned. QualificationsExperience: A minimum of two (2) year of experience working for an advanced life support EMS service, hospital, or US military. A minimum of one (1), preferred (2) years’ experience working in an industrial/offshore/remote setting fulfilling a medical and safety component. Previous experience working with OSHA and/or BSEE standards. Medical Licenses and Certifications: Paramedic level certification, PHTLS (Pre Hospital Trauma Life Support) or ATLS (Advanced Trauma Life Support) and BLS (Basic Life Support). ITLS (International Trauma Life Support) preferred. CPR (Cardiopulmonary Resuscitation) and ACLS (Advanced Cardiac Life Support). Knowledge of laws concerning the safeguarding and disposing of classified medications. Safety & Rescue Certifications: Atmospheric Testing, Defensive Driving, Facility Inspection, Fall Protection, Fire Watch, Forklift Safety, HAZWOPER, HLO (Helicopter Landing Officer), Confined Space Rescue/High Angle Rescue, and Certified Rigger/Competent Rigger, Certified First Aid / CPR Instructor. COSS, STS, or any other professional safety credentials considered a plus. General Education: High school diploma / GED required, Associates Degree or higher college education considered a plus.. If offshore: HUET (Helicopter, Underwater Egress Training), Safe Gulf, USCG/MMS Rules & Regulations, May require TWIC™ card (Transportation Worker Identification Credential), DMT (Dive Medical Training) if required by customer. Other Required Skills: Working knowledge of Microsoft Office, Excel, Outlook and other data base software. Ability to quickly learn new software applications utilized by company. Must understand all applicable legal, moral and ethical issues surrounding emergency medical service. Possesses critical reasoning skills and is capable of applying them effectively in stressful situations. Displays confidence and accepts the challenge and high degree of responsibility entailed in this position. Must possess leadership skills and display ability to direct others to assist as needed. Demonstrates effective communication (verbal, written & listening) and interpersonal skills. Must demonstrate ability to work in a team environment and willingness to assume additional or new responsibilities readily. Initiative: Must have excellent judgment, be able to prioritize decisions and act quickly in the best interest of the patient. Self motivation is essential. Acts to prevent conditions from getting out of hand or to resolve an issue as they see fit and reports immediately. Communicates as required by Site Emergency Response Plan. Is preauthorized to cope with issues and then report the results of their actions right away. Interpersonal Communications: Verbal communication and interpersonal skills are used constantly with the patient, other pre-hospital providers and hospital personnel, including physician medical directors. Must adapt to situations with may involve emotional instability and in multicultural settings. Shares opinions, ideas and resources with others to achieve common goals. Complexity of Duties and Decisions: Functions at an optimum level in a non-structured environment that is constantly changing. Must remain calm while working in difficult and stressful situations, and stay focused while carrying out the functions of the position. Supervisor reviews progress versus detailed check for technical adequacy and conformancewith practice and policy. Scope and Responsibility: Works independently and without direct supervision. May be responsible for supervising individuals or groups of medical providers. Acts as a mentor and provides guidance to less experienced staff. May assist with training, monitoring and coaching less experienced staff. Models and teaches compliance with all work practices,policies and procedures. Physical DemandsWhile performing the duties of this job, the employee is regularly required to stand; walk; and stoop, kneel, or crouch. Uses hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, and ability to adjust focus. May be required to wear SCBA (self contained breathing apparatus). May be required to work hours beyond normal work schedule. Work EnvironmentCombination of office and field / production environments. Some exposure to wet and/or humid conditions, outside and extreme weather conditions. Travel to and from customer sites. May encounter dangerous situations performing job including but not limited too explosions, high winds, hazardous atmosphere, bio-hazards, blood borne pathogens, high seas, and sub standard living conditions. May be required to fly in helicopters and fixed wing aircraft. Reporting Relationships: Complexity of Duties and Decisions: Functions at an optimum level in a non-structured environment that is constantly changing. Must remain calm while working in difficult and stressful situations, and stay focused while carrying out the functions of the position. Supervisor reviews progress versus detailed check for technical adequacy and conformancewith practice and policy. Authority: Works independently and without direct supervision. May be responsible for supervising individuals or groups of medical providers. Acts as a mentor and provides guidance to less experienced staff. May assist with training, monitoring and coaching less experienced staff. Models and teaches compliance with all work practices, policies and procedures. This job description is a general description of essential job functions. It is not intended as an employment contract, nor is it intended to describe all duties someone in this position may perform. All employees are expected to perform tasks as assigned by supervisory personnel, regardless of job title or routine job duties. About Total Safety: Total Safety is the world's premier provider of integrated safety and compliance services and the products necessary to support them, including gas detection, respiratory protection, safety training, fire protection, compliance and inspection, comprehensive flare services, industrial hygiene, onsite emergency medical treatment/paramedics, communications systems, engineered systems design, and materials management. Total Safety operates from 176 locations in 20 countries to ensure the safe Wellbeing of Workers Worldwide (W3). Total Safety is proud to be an Equal Opportunity Employer and will not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or any other protected status. If you require special assistance or accommodation while seeking employment with Total Safety, please contact Human Resources at (713) 353-5152. (For telecommunications device for the hearing impaired – TTY, please contact 711). #LI-NK1

What Total Safety employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom