From Home Paint Mixing Jobs in Kansas (NOW HIRING)

Pay Rate: $45/hr - $48/hr

Name:Aircraft Painter (M20AI4)

Duration: 3 Months

Location: 3420 South Oliver Street, Wichita, Kansas 67210

Skills:  

3-5 years of Aircraft painter experience

Spray applications, primer coats, final topcoat finishes are some of the requirements

Able to apply primers, stencilling finishes, clear coat and top coat gloss finish to composite and metallic surfaces

Supporting responsibilities include masking, scuffing, cleaning, and sanding operations as well as equipment maintenance and paint mixing operations

3rd shift, starts at 11 PM, OT is available

Must be able to complete respirator certifications and basic painter skill test

Duration is 3 months with possible extension and manager is open to direct conversion for the right worker

Duties:

General Statement Responsible for the spray application of multiple aerospace paints on a variety of substrates and on simple to complex product configurations, including the set up and application of primers and finish coat.

Supporting responsibilities include masking, racking, turning, and sanding operations as well as equipment maintenance and paint mixing operations. 

Qualifications include being able to read engineering blueprints, schematics, and drawings.

Can match or detect differences among colours, including shades of colour and brightness.

Able to remains steady while moving an arm or while holding arm and hand in position.

See details at close range. Make precise movements of the fingers to grasp, manipulate, or assemble small objects.

Able to quickly move hand, hand with arm or two hands to grasp, manipulate or assemble objects.

Tasks include mix paints to match colour specifications or original colours, using spatulas or power mixing equipment to stir or thin paints.

Select and apply paint according to engineering planning documents. Dispose of trash, scrap, and hazardous waste in an appropriate manner.

Remove grease, dirt, paint, or rust from surfaces using abrasives, solvents, and brushes or washing tanks to prepare to apply paint.

Spray or brush prepared surfaces with specified amounts of Alodine, primers or finish coatings per engineering planning.

Mix ingredients to create specific finishes.

Trim excess material. Use any equipment (e.g., computers or hand, power, and air tools)needed to complete paint assignments.

Perform any pickup, rework, and incorporation of changes to the product as required. Work from prints, sketches, specifications, and written/verbal instruction. Maintain required certifications, qualifications, licenses or permits.

Utilize precision measuring equipment (e.g. isoscopes and scales) to perform self-inspection of in-process and finished work.

Perform routine minor maintenance on sprayers, paint guns, etc. as part of the daily work duties. Move product within the manufacturing work area of the shop, including across aisles, using assigned equipment and complete transactions necessary to move product to the next operation.

Support the continuous flow of product within the manufacturing process by training and assisting employees of the same or lower classification level.

Inspect equipment, structures, or materials to identify the cause of errors or other problems or defects.

Analyse information and evaluate results to choose the best solution and solve problems as pertains to the paint process.

Ensure daily logs are completed for air quality prior to paint operations. Utilize required safety equipment and procedures such as respirators, air hoods/masks, Tyvek suits, gloves, donning/doffing, footwear, and safety eyewear.

Compliance with governing regulations including but not limited to BAC, OSHA and customer specifications.

Level AI4Employee can perform the critical functions of the paint technician such as locate application areas per the engineering p

Testing Details are as follows:

SAF327T - Respiratory Protection - Air Supplied Painter Hood, Recert

SAF322P - Respiratory Protection - Medium Size, Half-Face, Two-Cartridge Respirator Recertify

SAF325P - Respiratory Protection - Medium Size, Full-Face, Two-Cartridge Respirator Recertify

SAF326P - Respiratory Protection - Full-Face, Air-Supplied Respirator Recertify

MED800 Hexavalent Chromium Medical Surveillance

SAF003W - Hexavalent Chrome Regulated Area