1

Fall Protection Installer Jobs in Colorado (NOW HIRING)

Perform installation of antennas, mounts, cable ladders, cable, etc. * Assist in testing of sites ... General tower and fall protection safety knowledge and ability to utilize 100% tie off techniques ...

Attending and witnessing installation and commissioning of equipment. * Performing field ... protection, fall protection, etc.) for field work. * The ability and willingness to travel on ...

Reviews the Plans, Specifications, and Submittals to ensure proper installation techniques by ... excavations, fall protection, etc. * Manages the quality control program and effectively ...

Tower - Top Hand

Colorado Springs, CO · On-site

$22.25 - $27.25/hr

Perform installation of antennas, mounts, cable ladders, cable, etc. * Participate in new tower ... General tower and fall protection safety knowledge and ability to utilize 100% tie off techniques ...

Reviews the Plans, Specifications, and Submittals to ensure proper installation techniques by ... excavations, fall protection, etc. * Manages the quality control program and effectively ...

Tower - Top Hand

Aurora, CO · On-site

$26 - $32/hr

Perform installation of antennas, mounts, cable ladders, cable, etc. * Participate in new tower ... General tower and fall protection safety knowledge and ability to utilize 100% tie off techniques ...

Reviews the Plans, Specifications, and Submittals to ensure proper installation techniques by ... excavations, fall protection, etc. * Manages the quality control program and effectively ...

Plumber

Aurora, CO · On-site

$31.68 - $39.60/hr

Performs new installation, repair and preventative maintenance of both residential and commercial ... Skill in the use of single person lifts and fall protection procedures * Skill in monitoring the ...

... installation of electrical systems. RESPONSIBILITIES * Assemble, install, test, and maintain ... fall protection equipment, rigging, and form systems * Strong teamwork orientation, positive ...

next page

Showing results 1-20

Fall Protection Installer information

Does fall protection need to be certified?

Fall protection installers are often required to have certified equipment and may need to complete specific training or certifications to ensure safety standards are met. Certification helps verify that safety systems are properly installed and compliant with industry regulations. Employers typically require installers to be knowledgeable about OSHA standards and proper use of fall protection tools.

What is the difference between Fall Protection Installer vs Rope Access Technician?

AspectFall Protection InstallerRope Access Technician
CertificationsOSHA Fall Protection, OSHA 10/30, Fall Protection CertificationIRATA, SPRAT, OSHA 10/30
Work EnvironmentConstruction sites, industrial facilities, rooftopsIndustrial, maintenance, inspection, and rescue in hard-to-reach areas
Industry UsageConstruction, roofing, industrial safetyInspection, maintenance, and rescue in various industries

While both Fall Protection Installers and Rope Access Technicians work at heights and require safety certifications, Fall Protection Installers primarily focus on installing safety systems like harnesses and guardrails in construction and industrial settings. Rope Access Technicians use specialized rope techniques for inspection, maintenance, and rescue tasks in hard-to-reach areas. The roles overlap in safety training and working at heights but differ in scope and specific skills.

What is the highest paying OSHA job?

For a Fall Protection Installer, the highest paying OSHA-related jobs typically include safety managers, safety directors, or industrial safety engineers, who oversee safety protocols and compliance in high-risk industries. These roles often require specialized certifications, experience, and knowledge of OSHA standards, and they tend to offer higher salaries due to the level of responsibility and expertise involved.

What are Fall Protection Installers?

Fall Protection Installers are specialized professionals responsible for installing safety systems designed to prevent falls in workplaces, especially in construction, maintenance, and industrial settings. They set up equipment such as guardrails, safety nets, harness anchor points, and lifelines according to safety standards and regulations. Their work ensures that employees working at heights are protected from fall hazards, reducing the risk of serious injuries or fatalities. Fall Protection Installers must have a strong understanding of safety protocols, proper installation techniques, and relevant OSHA guidelines.

What jobs pay 4000 a week without a degree?

A Fall Protection Installer can earn around $4,000 per week with experience and specialized skills, especially in high-risk environments like construction or industrial settings. These roles often require safety certifications, physical fitness, and knowledge of safety equipment, but typically do not require a college degree. High-paying skilled trades like this can offer substantial weekly earnings based on project scope and location.

What jobs will be gone in the next 5 years?

For a Fall Protection Installer, jobs may decline in industries where automation and advanced safety technologies reduce the need for manual installation work. However, demand for skilled installers is expected to remain steady due to ongoing construction and safety regulations requiring human oversight. Staying updated on new safety standards and certifications can help maintain job prospects.

What are the key skills and qualifications needed to thrive as a Fall Protection Installer, and why are they important?

To thrive as a Fall Protection Installer, you need knowledge of construction safety standards, mechanical aptitude, and hands-on experience with installing fall protection systems, often supported by OSHA certifications or similar safety training. Familiarity with tools like harnesses, lifelines, anchor points, and specialized installation equipment is essential. Attention to detail, problem-solving abilities, and effective teamwork are vital soft skills in this role. These competencies ensure the safe and compliant installation of fall protection systems, reducing workplace accidents and maintaining regulatory compliance.

What are some common challenges faced by Fall Protection Installers on the job site?

Fall Protection Installers often encounter challenges such as working at significant heights, navigating complex building structures, and adapting to changing weather conditions. They must also ensure strict compliance with safety regulations and coordinate closely with other construction teams to avoid project delays. Staying current on the latest fall protection technologies and installation standards is essential for success and safety in this role.
What are popular job titles related to Fall Protection Installer jobs in Colorado? For Fall Protection Installer jobs in Colorado, the most frequently searched job titles are:
What job categories do people searching Fall Protection Installer jobs in Colorado look for? The top searched job categories for Fall Protection Installer jobs in Colorado are:
What cities in Colorado are hiring for Fall Protection Installer jobs? Cities in Colorado with the most Fall Protection Installer job openings:
VFD Technician - Texas & New Mexico

VFD Technician - Texas & New Mexico

Crimson Group

Longmont, CO • On-site

Other

Posted 20 days ago


Job description

Salary: $35-$42.00/HR USD

VFD Technician

We are seeking an experienced and adaptable VFD (Variable Frequency Drive) Technician to join our dynamic team servicing oil and gas operations in remote field locations. This role focuses on the installation, maintenance, troubleshooting, and repair of VFD systems and related automation equipment critical to upstream oilfield production and facility operations. Youll work independently and alongside multidisciplinary teams to ensure the reliable operation of VFD-driven equipment including motors, pumps, compressors, and control systems while adhering to safety and regulatory standards.

This position operates on a rotational fly-in/fly-out schedule supporting projects in Texas and New Mexico, with occasional call-out work in the Denver area as needed.


Who we are:
At the Crimson Group, we provide our clients with high-value automation, instrumentation, electrical design, and process operation solutions. With the capabilities of a large enterprise, and the agility and responsiveness of a small company, we are a customer-focused provider of automation and integrated solutions. Crimson Group provides total integration of design, project management, panel manufacturing, installation/commissioning, maintenance, and repair for North America and select international markets.


What we Offer:
Competitive salary, comprehensive benefit package, and a living out allowance (Per Diem).
A laptop and company cell phone.
An experienced logistics team to handle all flight and accommodation arrangements.
Premium company accommodation while on shift at no cost to our employees. Fully furnished condos with amenities such as pools, and fitness facilities.
PPE allowance.
An environment of continuous learning with the opportunity to enhance your skills & experience and grow within the organization.
The opportunity to participate in charitable events through our charity, RedTail Community Foundation.


What you will be Doing:
Install, commission, maintain, and troubleshoot VFDs, soft starters, and motor control equipment.
Diagnose electrical, electronic, and mechanical issues in VFD-driven applications (pumps, compressors, fans, etc.).
Program, configure, and calibrate drives (including parameter adjustments, tuning, and network integration).
Interpret electrical schematics, wiring diagrams, and control drawings.
Perform field repairs, component replacements, and preventive maintenance.
Collaborate with automation, instrumentation, and electrical teams to support facility operations.
Maintain detailed service records, reports, and documentation.
Ensure work is performed in compliance with safety policies and industry standards.


Your Skills and Qualifications:
Minimum 5 years of hands-on experience with VFD systems in Oil & Gas operations.
Strong working knowledge of VFD brands (e.g., Toshiba, ABB, Yaskawa, Allen-Bradley, Schneider, etc.).
Journeyman Electrician certification (or equivalent) is an asset. A degree in Electrical Engineering Technology, Instrumentation Technology or Electronic Technology would be considered.

Experience with motor controls, PLC integration, and automation systems preferred.
Ability to troubleshoot complex electrical/mechanical systems under minimal supervision.
Comfortable working in remote environments on a rotational schedule.
Valid safety certifications (H2S Alive, First Aid, Fall Protection, etc.) are assets.
Excellent problem-solving, communication, and documentation skills.
Must hold a valid driver's license and have the ability to pass a pre-employment drug and alcohol screening.


**As part of our commitment to maintaining a safe and professional work environment, the Crimson Group of Companies conducts comprehensive background checks and drug and alcohol testing on all prospective employees as part of the final offer process. These checks are intended to verify the accuracy of information provided by candidates and assess any potential risks to the company or its employees. All offers of employment are contingent upon the successful completion of these background checks.**