1

Erosion Control In Jobs in Georgia (NOW HIRING)

Soil Erosion Inspector

Cumming, GA · On-site

$52K - $68K/yr

... control measures are in place and properly maintained; checks for potential infringement upon County right-of-ways; takes photographs of erosion problems. Identifies code deficiencies, hazardous ...

Soil Erosion Inspector

Cumming, GA · On-site

$52K - $68K/yr

... control measures are in place and properly maintained; checks for potential infringement upon County right-of-ways; takes photographs of erosion problems. Identifies code deficiencies, hazardous ...

Construction Worker

Augusta, GA · On-site

$17 - $22.75/hr

TEC is the largest and most experienced contractor in providing comprehensive erosion control services, specialty materials, forestry, and other site clean-up services to clients throughout the ...

Construction Worker

Woodstock, GA · On-site

$16.25 - $21.75/hr

TEC is the largest and most experienced contractor in providing comprehensive erosion control services, specialty materials, forestry, and other site clean-up services to clients throughout the ...

Construction Worker

Augusta, GA · On-site

$14 - $18.75/hr

TEC is the largest and most experienced contractor in providing comprehensive erosion control services, specialty materials, forestry, and other site clean-up services to clients throughout the ...

Construction Worker

Jackson, GA · On-site

$16.50 - $22/hr

TEC is the largest and most experienced contractor in providing comprehensive erosion control services, specialty materials, forestry, and other site clean-up services to clients throughout the ...

Construction Worker

Savannah, GA · On-site

$15 - $20/hr

TEC is the largest and most experienced contractor in providing comprehensive erosion control services, specialty materials, forestry, and other site clean-up services to clients throughout the ...

Construction Worker

Cartersville, GA · On-site

$16 - $21.50/hr

TEC is the largest and most experienced contractor in providing comprehensive erosion control services, specialty materials, forestry, and other site clean-up services to clients throughout the ...

Construction Worker

Covington, GA · On-site

$15.25 - $20.50/hr

TEC is the largest and most experienced contractor in providing comprehensive erosion control services, specialty materials, forestry, and other site clean-up services to clients throughout the ...

next page

Showing results 1-20

Erosion Control In information

What are the 4 types of erosion?

The four main types of erosion are sheet erosion, rill erosion, gully erosion, and wind erosion. Erosion control professionals in this field often implement methods like silt fences, erosion control blankets, and vegetation to prevent soil loss and protect construction sites or landscapes.

What is erosion short answer?

Erosion is the process by which soil, rock, or other surface material is worn away and transported by natural forces such as water, wind, or ice. Erosion control involves implementing measures like silt fences, erosion mats, and vegetation to prevent or reduce soil loss, which is a key responsibility for erosion control workers. These professionals often use specialized tools and may require safety certifications to perform their duties effectively.

What are the key skills and qualifications needed to thrive as an Erosion Control Inspector, and why are they important?

To thrive as an Erosion Control Inspector, you need a solid understanding of soil science, environmental regulations, and civil engineering principles, often supported by a relevant degree or certification. Familiarity with GIS software, erosion control products, and inspection reporting systems is typically required. Attention to detail, problem-solving, and effective communication are essential soft skills for coordinating with contractors and regulatory agencies. These skills are vital to ensure compliance, protect natural resources, and prevent costly environmental damage on construction sites.

What are some typical challenges faced by Erosion Control Inspectors, and how can they be managed on the job?

Erosion Control Inspectors often face challenges such as rapidly changing weather conditions, ensuring contractor compliance with regulations, and balancing multiple project sites. Staying organized and proactive communication with construction teams are crucial for managing these challenges. Inspectors typically use checklists, digital reporting tools, and regular site visits to monitor progress and maintain compliance. Building strong relationships with site managers and local authorities can also help resolve issues efficiently and ensure environmental standards are met.

What is the difference between Erosion Control In vs Erosion Control Technician?

AspectErosion Control InErosion Control Technician
CertificationsOSHA safety training, erosion control certificationsOSHA safety training, erosion control certifications
Work EnvironmentIndoor and outdoor construction sites, project managementOutdoor construction sites, installing erosion control measures
Employer & Industry UsageConstruction, landscaping, environmental projectsConstruction, environmental services, landscaping

Both roles require similar certifications and work in outdoor construction environments. Erosion Control In often involves overseeing installation and project coordination, while Erosion Control Technicians focus on hands-on installation of erosion control measures. Understanding these differences helps clarify career paths and job expectations within the industry.

What are erosion control inspectors and what do they do?

Erosion control inspectors are professionals responsible for monitoring construction sites and land development projects to ensure compliance with environmental regulations related to soil erosion and sediment control. They inspect sites to verify that proper measures, such as silt fences, sediment basins, and ground covers, are in place and functioning effectively to prevent soil erosion and protect nearby waterways from sediment pollution. Inspectors document their findings, provide recommendations for corrective actions, and may educate contractors on best management practices. Their work helps protect natural resources and maintain compliance with local, state, and federal regulations.

What is a simple definition of erosion?

Erosion, in the context of erosion control, is the process by which soil, rock, or other surface materials are worn away and transported by natural forces such as water, wind, or gravity. Erosion control professionals implement measures like silt fences and vegetation to prevent or reduce this process on construction sites and disturbed land. Understanding erosion helps ensure site stability and environmental protection.

Which best defines erosion?

Erosion is the process by which soil, rock, or other surface material is worn away and transported by natural forces such as water, wind, or ice. Erosion control involves implementing measures to prevent or reduce this process, which is essential in construction and environmental management to protect land stability and prevent sediment runoff.
What are popular job titles related to Erosion Control In jobs in Georgia? For Erosion Control In jobs in Georgia, the most frequently searched job titles are:
What job categories do people searching Erosion Control In jobs in Georgia look for? The top searched job categories for Erosion Control In jobs in Georgia are:
Worksite Erosion Control Technician

Worksite Erosion Control Technician

C.W. Matthews

Atlanta, GA • On-site

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Posted 26 days ago


C.W. Matthews rating

7.3

Company rating: 7.3 out of 10

Based on 11 frontline employees who took The Breakroom Quiz


Job description

CWM has an immediate opening for a Worksite Erosion Control Technician (WECS). Qualified candidates must have a minimum of 2 to 5 years' experience as a WECS. The ideal candidate should have experience in heavy highway and large project erosion control to include erosion control planning, implementation and recording as well as up to date GDOT WECS card, NWSCC Level 1-A card, and a current valid driver's license. Re-certification assistance may be provided.
The position consists of but is not limited to the following:
  • Setup and maintenance of Erosion and Sedimentation Control Process
  • Ability to read plans and implement BMPs accurately
  • DOT Specification Knowledge
  • Grading -Temporary and Permanent
  • Checklist and EC-1 Reports and computer literate
  • Installation of BMPs and removal of silt fence.
  • Direct small crew and/or subcontractor to execute erosion control maintenance/installation
  • Checking and maintaining grade stakes
  • Set up and maintenance of all traffic control aids when needed.

What CWM Offers You:
  • A supportive and inclusive culture that values growth, development, and internal promotion opportunities.
  • Highly competitive base pay.
  • Health insurance, dental, vision, life insurance, and disability benefits programs.
  • 401(k) with company match, Paid Holidays, and Year-End Bonus.
  • Child Care Assistance
  • Generous paid time off program

Equal Opportunity Employer: CWM is an Equal Opportunity Employer and welcomes applicants from all backgrounds. M/F/V/H.

What C.W. Matthews employees say

Pay

Hours and flexibility

Workplace

Get the full story on Breakroom


C.W. Matthews Contracting logo

About C.W. Matthews Contracting

Sourced by ZipRecruiter

C.W. Matthews Contracting Company is a leading heavy highway construction contractor operating throughout Georgia. We’re a team of more than 1,500 hard-working men and women committed to serving our communities. Together, we’re making a difference by building safe, reliable infrastructure to Get Georgia Home. For close to a century, C.W. Matthews has built state-of-the-art roads, bridges, airport runways, and more. Our projects are used by millions of people every day to get where they need to go—whether they’re driving their children to school in the morning, shopping for groceries to feed their families, or embarking on this year’s summer road trip. The work we do touches nearly every aspect of modern life, and we are committed to doing it to the best of our abilities.

Industry

Construction

Company size

1,001 - 5,000 Employees

Headquarters location

Marietta, GA, US

Year founded

1946