Entry Level Network Engineer Jobs in Springfield, MA

Summary
The position is in a Federal Highway Administration (FHWA) Federal-aid Division or Federal Lands Highway Division Office. The Civil Engineer (Highway) assists in managing and promoting assigned Federal Highway Programs within the state or, as a shared resource, in multiple states. Provides engineering stewardship and oversight at various junctures of project and program delivery of FHWA infrastructure projects within the state(s)/region.
Learn more about this agency
Duties
Help
FHWA's PDP is an entry-level/new employee program designed to introduce participants to the technical, administrative, and program management aspects of administering the Federal-aid Highway and Federal Lands Highway Programs. The PDP is up to 24-months of entry-level career development training for participants to learn and apply technical skills to advance.
The Federal Aid Highway Program supports state highway systems by providing financial assistance for the construction, maintenance, and operations of the nation's 3.9-million-mile highway network. This includes the Interstate Highway System as well as primary highways and secondary, local roads. FHWA is charged with implementing the Federal Aid Highway Program in cooperation with state and local governments.
The mission of the Federal Lands Program is to improve transportation to and within Federal and Tribal Lands by providing technical services to the highway/transportation community as well as building accessible and scenic roads that ensure the many national treasures within our nation's Federal Lands can be enjoyed by all.
As a Civil Engineer (Highway), you will:

• Immerse in experiential learning in both FHWA's Federal Aid and Federal Lands Highway Division Offices, where you will receive on-the-job training through a structured set of learning experiences described in a development plan. Several developmental assignment options may include one or more of the following: design, construction, project development, environment, safety, pavements, materials, research, Intelligent Transportation System, bridge, traffic operations, hydraulics, preventive maintenance, access management, utilities, and right-of-way, planning, surveys, geotechnical, value engineering, among others.

The ideal candidate for this position is an entry to beginning level technical engineer who has a desire to learn about the various aspects of technical highway engineering, including but not limited to, highway design, construction, bridge, geotechnical, survey and mapping, hydraulics and materials testing. The ideal candidate should have between 0 to 5 years of experience, be mobile and willing to travel to remote locations for extended periods of time and be able to work independently and in a team environment.
Requirements
Help
Conditions of employment

• You must be a U.S. citizen & meet specialized experience to qualify
• Submit application and resume online by 11:59 PM EST on the closing date
• Required documents must be submitted by the closing date.
• Direct Hire Authority/SME will be used to fill this position

CONDITIONS OF EMPLOYMENT:
As a condition of employment for accepting this position, you will be required to serve a 1-year probationary period during which we will evaluate your fitness and whether your continued employment advances the public interest. In determining if your employment advances the public interest, we may consider:

• your performance and conduct;
• the needs and interests of the agency;
• whether your continued employment would advance the organizational goals of the agency or the Government; and
• whether your continued employment would advance the efficiency of the Federal service.

Upon completion of your probationary period, your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.

• SELECTIVE SERVICE: Males born after 12/31/1959 must be registered for the Selective Service.
• GOVERNMENT TRAVEL CARD: This position involves travel. A government contractor-issued travel card will be issued and must be retained for official business only.
• BACKGROUND INVESTIGATION: You may be required to complete a background/security investigation and meet preliminary requirements prior to onboarding.
• PCS/RELOCATION/RECRUITMENT: Permanent Change of Station (PCS), Relocation, and Recruitment Incentive authorization varies by position/selection and a service agreement may be required.
• PROBATIONARY PERIOD: Applicants may be required to successfully complete a one-year probationary period (unless already completed).
• MOBILITY AGREEMENT: Appointees will be required to sign a Mobility Agreement. If you decline a position due to geographic location, you will receive no further consideration under this announcement. This agreement states that as a part of your developmental assignment, you may be
  assigned to any location within the Agency, and that you will move to the new duty location. Failure to relocate can be used as the basis for non-
  selection and failure to relocate after completion of your Individual Development Plan (IDP) can be the basis for your termination from the
  Federal service.
• SERVICE AGREEMENT: Appointees will be required to sign an agreement to continue in service upon completion of the development training and
  serve in the agency twice the length of the training period (approximately 24 months).

Qualifications
To meet the minimum qualifications for this position, you must (1) meet the Education Requirement for the series, (2) provide a copy of transcripts for verification, AND (3) meet either the education or experience qualifications for the grade at which you are requesting consideration.
To qualify for the GS-07 on Experience, you must have at least one year of experience equal or equivalent to the GS-05 it must include:

• Experience reviewing engineering regulations or policies.
• Experience applying civil engineering principles and practical concepts related to highway road and system structures, transportation systems, traffic engineering, and modeling.
• Experience conducting analyses to support conclusions or recommendations.

To qualify for the GS-07 on Education alone, you must have at least 1 year of graduate-level education OR superior academic achievement* at the baccalaureate level in an engineering program.

• *Superior Academic Achievement is based on (1) class standing, (2) grade-point average, or (3) honor society membership. To be creditable under this provision, superior academic achievement must have been gained in a curriculum that is qualifying for the position to be filled.
• 1. Class standing Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses.
• 2. Grade-point average (G.P.A.) Applicants must have a grade-point average of: 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on their official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.

You can also qualify based on a combination of graduate level education and experience. This must be fully supported by your resume and transcripts, provided with your application.
To qualify for the GS-09 on Experience, you must have at least one year of experience equal or equivalent to the GS-07 it must include:

• Experience reviewing engineering design standards and regulations.
• Experience conducting analytical investigations using the scientific method, modeling, and computational analyses.
• Experience articulating information through various platforms such as discussions, meetings, fact sheets, reports, design documentation, briefings, and presentations.

To qualify for the GS-09 on Education alone, you must have 2 years of progressively higher level graduate education leading to a master's degree or have been awarded a master's or equivalent graduate degree. You can also qualify based on a combination of graduate education and experience. This must be fully supported by your resume and transcripts, provided with your application.
KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:

1. Civil Engineering - Knowledge of the concepts, principles, theories, and methods required to plan, design, construct, operate, and maintain facilities such as buildings, transportation systems, water and sanitary systems, and other public works systems.
2. Transportation Engineering - Knowledge of concepts, principles, theories, and methods applicable to planning, designing, and constructing transportation systems, including traffic analysis, signal analysis, highway capacity, pavement design, bridge construction, planning of transportation projects, environmental analysis of transportation facilities, and transportation network analysis.
3. Written Communication - Writes in a clear, concise, organized, and convincing manner for the intended audience.
4. Oral Communication - Expresses information (for example, ideas or facts) to individuals or groups effectively, considering the audience and nature of the information (for example, technical, sensitive, controversial); makes clear and convincing oral presentations; listens to others, attends to nonverbal clues, and responds appropriately.

For all types of consideration, experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience
For additional information about applying to Federal positions, please click on the following link: https://www.opm.gov/frequently-asked-questions/employment-faq/federal-hiring/how-do-i-apply-for-federal-jobs/
Students enrolled in a qualifying degree program can apply if the anticipated graduation date is within six months of closing date of the announcement. Graduation transcript must be received before start date.
Other applicants must meet all qualification requirements by the closing date of this announcement.
Education
All applicants must meet the requirements under A or B to qualify for applying to an engineering position.
A. Degree: Engineering To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR
B. Combination of education and experience College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrol