ZipRecruiter

Log In

1

Control Panel Wiring Jobs in Georgia (NOW HIRING)

Rad Source Technologies

Be Seen First

Assembly Technician - Control Panel Wiring Experience

Buford, GA · On-site

$24 - $27/hr

Control Panel Wiring Experience highly preferred * Able to read/follow electrical schematic, electrical panels and wire applicable components. * Industrial controls panel wiring point-to-point.

VaCom

Panel Shop Fabricator

La Verne, CA · On-site

$24 - $26/hr

Wiring including 460 V motor controls, 120 V control and low voltage wiring. * Lay out components including PLCs, VFDs, and power and control devices. * Perform control panel testing. * Ensure 5S ...

Southern Flow, Inc.

Be Seen First

Control Systems Engineer II

Alpharetta, GA · On-site

Design control panel wiring diagrams, layouts, and schematics using AutoCAD * Perform onsite startup, commissioning, diagnostics, and troubleshooting * Configure and troubleshoot industrial Ethernet ...

M.C. Dean, Inc

Control Technician 4

Suwanee, GA · On-site

Ability to fabricate control panels including design, layout, and install components. * Ability to install, wire, and test wiring of PLC's, VFD's, and other Solid State control components.

Steele Solutions

Controls Engineer I

Atlanta, GA · On-site

$80K - $104K/yr

Familiarity with control panel wiring, I/O devices, and industrial sensors. * Willingness to travel (up to50%) for commissioningefforts andsupport. * Strong written and verbal communication skills.

GRENZEBACH

Logistics Coordinator

Newnan, GA · On-site

$17.50 - $23.50/hr

Experience with the assembly complex wiring layouts on control panels. * Experience using hand tools such as electric and manual screwdrivers, wire strippers, and crimpers.

Cleaver-Brooks

Panel Shop Assembler

Thomasville, GA

$14 - $17.75/hr

Lays out and wires control panel * Makes terminations / connections * Fasten wiring * Knows how and where to mount components * Inspect and test completed units. * Tag or mark identifying information ...

Cleaver-Brooks, Inc.

Panel Shop Assembler

Thomasville, GA · On-site

$14 - $17.75/hr

Lays out and wires control panel * Makes terminations / connections * Fasten wiring * Knows how and where to mount components * Inspect and test completed units. * Tag or mark identifying information ...

Tomco

Electrical Technician

Loganville, GA · On-site

$26 - $29/hr

Electrical Panel Wiring * Panel Installation * Panel to equipment wiring - will need to demonstrate ... Experience with Industrial Control Panels UL508A is a plus * Low voltage controls experience

M.C. Dean, Inc

Control Technician 1

Suwanee, GA · On-site

Performing panel build, panel mounting, panel penetrations, wiring, and cosmetic repairs. * Ability ... control experience. Tools: * Various power tools including drills, saws, punch sets utilizing ...

Dover Corporation

Assembler II - Panel Worker

Conyers, GA

$13.25 - $16/hr

Installs, Repairs Wiring, Apparatus & Control Equipment Follows Diagrams or Blueprints Ensuring ... Assists in training Panel Worker I Ensure OJT Training Documents are updated Perform OJT training ...

next page

Showing results 1-20

All JobsControl Panel Wiring JobsControl Panel Wiring Jobs in Georgia

Control Panel Wiring information

See Georgia salary details

$10

$18

$25

How much do control panel wiring jobs pay per hour?

As of Jul 17, 2026, the average hourly pay for control panel wiring in Georgia is $18.01, according to ZipRecruiter salary data. Most workers in this role earn between $15.43 and $19.71 per hour, depending on experience, location, and employer.

What are some typical challenges faced by professionals working in control panel wiring?

Control panel wiring professionals often encounter challenges such as interpreting complex wiring diagrams, adapting to frequently changing project specifications, and ensuring all wiring meets strict safety and industry standards. Additionally, working in tight or crowded panel spaces requires both dexterity and patience, and maintaining clear communication with engineers and other team members is essential to resolve any design questions or issues. Overcoming these challenges can be both demanding and rewarding, allowing individuals to gain valuable problem-solving experience and develop a strong sense of accomplishment as part of a collaborative technical team.

What is a Control Panel Wiring job?

A Control Panel Wiring job involves assembling, routing, and connecting electrical wires within control panels, enclosures, or machines. It includes reading schematics, wiring diagrams, and blueprints to ensure proper connections for industrial or commercial electrical systems. Technicians also test and troubleshoot wiring to ensure functionality and compliance with safety standards. This role is essential in manufacturing, automation, and electrical industries.

What are the key skills and qualifications needed to thrive in the Control Panel Wiring position, and why are they important?

To thrive in Control Panel Wiring, you need strong electrical wiring skills, experience with schematic diagrams, and a good understanding of safety protocols, often supported by a technical diploma or apprenticeship in electrical engineering or a related field. Familiarity with tools such as wire strippers, crimpers, multimeters, and knowledge of industry standards like NEC or IEC is typically required, and certifications such as OSHA safety training can be advantageous. Attention to detail, problem-solving abilities, and effective teamwork are important soft skills for this role. These competencies ensure panels are assembled correctly, safely, and efficiently, minimizing errors and supporting successful project completion.

What are the most commonly searched types of Control Panel Wiring jobs in Georgia? The most popular types of Control Panel Wiring jobs in Georgia are:
What are popular job titles related to Control Panel Wiring jobs in Georgia? For Control Panel Wiring jobs in Georgia, the most frequently searched job titles are:
What job categories do people searching Control Panel Wiring jobs in Georgia look for? The top searched job categories for Control Panel Wiring jobs in Georgia are:
What cities in Georgia are hiring for Control Panel Wiring jobs? Cities in Georgia with the most Control Panel Wiring job openings:
Control Panel Wiring jobs near you
Infographic showing various Control Panel Wiring job openings in Georgia as of July 2026, with employment types broken down into 1% As Needed, 76% Full Time, 18% Part Time, 1% Temporary, and 4% Contract. Highlights an 96% Physical, 1% Hybrid, and 3% Remote job distribution, with an average salary of $37,470 per year, or $18 per hour.
Assembly Technician - Control Panel Wiring Experience

Assembly Technician - Control Panel Wiring Experience

Rad Source Technologies

Buford, GA • On-site

$24 - $27/hr

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Re-posted 25 days ago

Be Seen First

After you apply to this job, you can share why you’re interested to jump to the top of the candidate list.

Job description

Assembly Technician


**THIS IS AN ON-SITE POSITION**


Duties and Responsibilities:

  • Assemble and test electrical and mechanical systems.
  • Maintain clean and safe work environment.
  • Keeps track of various parts and makes requests when needed.


Qualifications:

  • Control Panel Wiring Experience highly preferred
  • Able to read/follow electrical schematic, electrical panels and wire applicable components.
  • Industrial controls panel wiring point-to-point.
  • Able to work from mechanical drawings to assembling multiple products.
  • Previous electrical and mechanical applications experience helpful.
  • Low voltage control experience is a big plus.


Compensation:

Compensation is competitive and will be based on the candidate's skills, experience, and qualifications.


Benefits:

  • Monthly Benefit Allowance awarded to all employees.
  • Comprehensive Benefits Package
  • 401(k) Match – 100% up to 5% / fully vested immediately
  • PTO and Holiday Pay
  • Opportunities for growth
  • Monday - Friday


Rad Source Technologies, Inc. is an equal opportunity employer where employment is based upon personal capabilities and qualifications without discrimination because of race, color, religion, gender, age, national origin, disability, veteran status, or any other protected characteristic as established by law.


Disclaimer: This job description may not be inclusive of all assigned duties, responsibilities, or aspects of the job described, and may be amended at any time at the sole discretion of the Employer.

Company Description

Rad Source was founded in 1997 for the purpose of creating non-gamma irradiation alternatives. Even prior to the more recent security issues associated with radioactive gamma sources, the company’s vision was to solve environmental disposal and related practical issues associated with “hot” source equipment.
Based on that, we introduced our first products in 1999 incorporating x-ray technology including the first FDA cleared x-ray blood irradiator as well as our laboratory research x-ray irradiator, the RS 2000.
Since then, we’ve continued expanding our capabilities and adding to our proprietary x-ray based irradiation technology, developing proprietary x-ray sources and new equipment. We are a global enterprise and our equipment resides in major pharmaceutical labs, healthcare institutions and renowned universities around the world. We are based in Buford, Georgia, USA where our highly qualified and dedicated staff continues to develop our technology, design and produce our equipment.