1

Contract Rf Tester Jobs in California (NOW HIRING)

RF Design Engineer

San Diego, CA · On-site

$100K - $150K/yr

S. federal contracts. * All employment is contingent upon the successful clearance of a background ... Lift equipment up to 20 lbs. for the set-up of demonstrations and testing. * Perform bending and ...

S. federal contracts. * All employment is contingent upon the successful clearance of a background ... Lift equipment up to 20 lbs. for the set-up of demonstrations and testing. * Perform bending and ...

Contract Compensation: $70-$100/hour Location: Remote Commitment: 15-20 hours/week Role ... Evaluate and refine problems through testing loops against state-of-the-art AI models . * Create ...

Type: Contract * Job #105110 Job Title: Technician V - Lab Technician Contract Duration: 1 Year ... Operate and work with RF laboratory equipment to support testing and validation activities.

Business customers have contracts with agreed-upon performance standards for their broadband, and ... A minimum of 4 years of experience in RF or millimeter wave hardware design, analysis, and testing

RF Antenna Engineer

Carson, CA · On-site +1

$50 - $105/hr

RF/Antenna Engineer Your mission is to accelerate the development of the novel antenna technologies ... testing phase. Job Type & Location This is a Contract to Hire position based out of Long Beach, CA.

... in signed contracts across commercial and US government customers - we're mass-producing the ... Qualify radio-frequency and antenna hardware through environmental testing, including vibration ...

RF Hardware Engineer

Los Angeles, CA · On-site

$115K - $200K/yr

... in signed contracts across commercial and US government customers - we're mass-producing the ... Qualify your designs through environmental testing including vibration, shock, thermal, and thermal ...

... in signed contracts across commercial and US government customers - we're mass-producing the ... Qualify your designs through environmental testing including vibration, shock, thermal, and thermal ...

... in signed contracts across commercial and US government customers - we're mass-producing the ... Qualify radio-frequency and antenna hardware through environmental testing, including vibration ...

next page

Showing results 1-20

Contract Rf Tester information

What is the difference between Contract Rf Tester vs Contract Network Tester?

AspectContract Rf TesterContract Network Tester
CertificationsRF certifications, such as FCC or CENetworking certifications like Cisco CCNA or CompTIA Network+
Work EnvironmentTesting RF equipment, antennas, and wireless devicesTesting network infrastructure, switches, and routers
Industry UsageTelecommunications, wireless, and electronics manufacturingIT, telecommunications, and data centers

Contract Rf Testers focus on testing radio frequency devices and wireless systems, while Contract Network Testers specialize in evaluating network infrastructure and connectivity. Both roles require technical certifications and work in related industries, but they target different aspects of communication technology.

What are the most commonly searched types of Rf Tester jobs in California? The most popular types of Rf Tester jobs in California are:
What are popular job titles related to Contract Rf Tester jobs in California? For Contract Rf Tester jobs in California, the most frequently searched job titles are:
What job categories do people searching Contract Rf Tester jobs in California look for? The top searched job categories for Contract Rf Tester jobs in California are:
What cities in California are hiring for Contract Rf Tester jobs? Cities in California with the most Contract Rf Tester job openings:
RF Design Engineer

$100K - $150K/yr

Full-time

Medical, Dental, Vision, Retirement, PTO

Posted 9 days ago


Motorola Solutions rating

8.7

Company rating: 8.7 out of 10

Based on 40 frontline employees who took The Breakroom Quiz

11th of 143 rated electronics manufacturers


Job description

Company Overview
At Motorola Solutions, we believe that everything starts with our people. We're a global close-knit community, united by the relentless pursuit to help keep people safer everywhere. We build and connect technologies to help protect people, property and places. Our solutions foster the collaboration that's critical for safer communities, safer schools, safer hospitals, safer businesses, and ultimately, safer nations. Connect with a career that matters, and help us build a safer future.
Department Overview
Silvus Technologies, a leading provider of advanced MANET and MIMO communications systems, is reshaping mesh network technology for mission-critical applications - on the ground, in the air and at sea. Its battle-proven StreamCaster family of MANET radios and proprietary MN-MIMO waveform provides the vital communications link for defense, law enforcement and public safety agencies around the world, and in the toughest operational environments.
Silvus Technologies is a wholly owned subsidiary of Motorola Solutions, Inc.
Job Description
Would you like to join an incredibly talented group of people, doing very challenging work, with the prime directive of "Keeping Our Heroes Connected"?
THE OPPORTUNITY
Silvus is seeking a RF Design Engineer who will report to the Director of RF Engineering on the RF Engineering team. The successful individual in this role will actively participate in all aspects of the design process to develop the RF subsystem for Silvus' StreamCaster MANET product line.
This position is 100% onsite, Monday through Friday, at our office in Rancho Bernardo/North San Diego, CA.
The following is a list of at least some of the current essential job functions of the position. Management may assign or reassign duties and responsibilities at any time at its discretion.
ROLE AND RESPONSIBILITIES
  • Antenna to baseband RF subsystem design using discrete circuitry or highly integrated RFICs.
  • Discrete design includes PLL, LNA, Mixers, PA etc.
  • Implementing or supervising schematic capture and PCB layout.
  • RF performance characterization, tuning, and troubleshooting.
  • Overall system design to ensure good EMI performance.
  • Ensure circuit board design and overall radio product can pass emission and immunity regulations.
  • Troubleshoot RF-related production yield problems.
  • Improve design for manufacturability.
  • Perform other related duties of which the above are representative.
  • Travel Requirement - Rare local travel, as required by Silvus (i.e. Irvine, West LA.

REQUIRED QUALIFICATIONS
  • Bachelors of Science (or higher) in Electrical Engineering.
  • Minimum 2 years of multi-GHz RF hardware development experience.
  • Good working knowledge of RF board layout, fabrication, and packaging.
  • Hands-on experience with solving EMI, harmonics, spurious, and stability issues.
  • Experience using RF simulation tools (i.e. AWR Microwave Office, Altium).
  • Must be a U.S. Person (U.S. Citizen, or U.S. Permanent Resident) due to clients under U.S. federal contracts.
  • All employment is contingent upon the successful clearance of a background check and drug test.

PREFERRED KNOWLEDGE, SKILLS, AND ABILITIES
  • Master of Science in Electrical Engineering.
  • Excellent bench skills.
  • Proactive approach to problem-solving.
  • Detail-oriented and a firm commitment to quality.
  • Ability to work in a collaborative, multidisciplinary team environment.
  • Problem-solving, data analysis, deductive reasoning, and critical thinking skills.

WORKING CONDITIONS AND PHYSICAL REQUIREMENTS
  • Indoor air-conditioned facility.
  • Office environment.
  • Occasional exposure to heat, cold, and allergens while performing tests or demonstrations in the field.
  • While performing the duties of this job, the employee is required to do the following:
  • Lift equipment up to 20 lbs. for the set-up of demonstrations and testing.
  • Perform bending and reaching movements to place items on lower and higher shelves.
  • Kneeling or squatting to access lower shelves.
  • Walking/Moving in the labs.

COMPENSATION: $100,000 - $150,000 / annually
#silvuscareers
Consistent with Motorola Solutions values and applicable law, we provide the following information to promote pay transparency and equity. Pay within this range varies and depends on job-related knowledge, skills, and experience. The actual offer will be based on the individual candidate.
NOTE - As a US Federal Contractor, Silvus Technologies requires that ALL candidates being considered for employment for any position (regardless of level) MUST be a U.S. Person (permanent resident or citizen). Stricter U.S. Citizen ONLY requirements (needed for some Engineering or R&D roles) will be included in the Required Qualifications section of the posted position. This does NOT apply to international positions; only job postings for positions located in the US.
Basic Requirements
  • Bachelors of Science (or higher) in Electrical Engineering.
  • Minimum 2 years of multi-GHz RF hardware development experience.
  • Must be a U.S. Person (U.S. Citizen, or U.S. Permanent Resident) due to clients under U.S. federal contracts.
  • All employment is contingent upon the successful clearance of a background check and drug test.

Travel Requirements
Under 10%
Relocation Provided
None
Position Type
Experienced
Referral Payment Plan
Yes
Our U.S. Benefits include:
  • Incentive Bonus Plans
  • Medical, Dental, Vision benefits
  • 401K with Company Match
  • 10 Paid Holidays
  • Generous Paid Time Off Packages
  • Employee Stock Purchase Plan
  • Paid Parental & Family Leave
  • and more!

EEO Statement
Motorola Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or belief, sex, sexual orientation, gender identity, national origin, disability, veteran status or any other legally-protected characteristic.
We are proud of our people-first and community-focused culture, empowering every Motorolan to be their most authentic self and to do their best work to deliver on the promise of a safer world. If you'd like to join our team but feel that you don't quite meet all of the preferred skills, we'd still love to hear why you think you'd be a great addition to our team.
We're committed to providing an inclusive and accessible recruiting experience for candidates with disabilities, or other physical or mental health conditions. To request an accommodation, please complete this Reasonable Accommodations Form so we can assist you.

What Motorola Solutions employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom


Motorola Solutions logo

About Motorola Solutions

Sourced by ZipRecruiter

At Motorola Solutions, we believe that everything starts with safety. It's the constant that empowers people to confidently move forward. It can fill a flight or sell out a stadium. It can care for a patient or graduate a class. As a global leader in public safety and enterprise security, we create and connect the technologies that help to keep people safe where they live, learn, work and play. Our integrated technology ecosystem unifies critical communications, video security and access control, and command center software, enabling collaboration in more powerful ways. At Motorola Solutions, we're ushering in a new era in public safety and security. Bring your passion, potential and talents to a career that matters.

Industry

Technology, communication and media

Company size

10,000+ Employees

Headquarters location

Chicago, IL, US

Year founded

1928