ZipRecruiter

Log In

1

Coating Inspection Jobs in Baltimore, MD (NOW HIRING)

Driven Pavement Maintenance And Ser

Be Seen First

Parking Lot Asphalt/Concrete Technician

Essex, MD · On-site

$20 - $22/hr (+ commission)

Inspect sites, determine repair scope, and * choose proper materials and methods * Train and guide ... In addition to painting services, we offer power sweeping, power washing, asphalt seal coating ...

Driven Pavement Maintenance And Ser

Be Seen First

Parking Lot Asphalt/Concrete Technician

Essex, MD · On-site

$20 - $22/hr (+ commission)

Inspect sites, determine repair scope, and * choose proper materials and methods * Train and guide ... In addition to painting services, we offer power sweeping, power washing, asphalt seal coating ...

Vitesse Systems

Painter II

Jessup, MD · On-site

$18.75 - $25.75/hr

Prepare parts for painting or powder coating by sanding down units and/or masking units * Apply paint or protective coatings to a variety of sized partsusing a spray gun * Conduct quality inspections ...

Vitesse Systems

Painter II-Jessup, Maryland

Aspen Hill, MD · On-site

$18.50 - $25.25/hr

Prepare parts for painting or powder coating by sanding down units and/or masking units * Apply paint or protective coatings to a variety of sized partsusing a spray gun * Conduct quality inspections ...

Vitesse Systems

Painter II

Jessup, MD · On-site

$18.75 - $25.75/hr

Prepare parts for painting or powder coating by sanding down units and/or masking units * Apply paint or protective coatings to a variety of sized partsusing a spray gun * Conduct quality inspections ...

Dreyer's Grand Ice Cream, Inc.

Mix Maker

Laurel, MD · On-site

Make mix and cookie coating necessary for production lines. Test butterfat and solids to insure ... Participate in the Self-Inspection Audits and follow up with supervisor to ensure issues were ...

Lyntris - Jessup

Painter II

Jessup, MD · On-site

$30 - $36/hr

Prepare parts for painting or powder coating by sanding down units and/or masking units * Apply paint or protective coatings to a variety of sized partsusing a spray gun * Conduct quality inspections ...

Anne Arundel County, MD

Roads Maintenance Supervisor

MD · On-site

$58K - $107K/yr

Work is reviewed through conferences and reports and is subject to inspection by a technical or ... roads and the seal coating of roads; acts as yard foreman. Supervises directly or through ...

Bitumar

Operator - Opérateur

Baltimore, MD · On-site

$17.50 - $23.25/hr

Support polymer, coating, and blending operations as required. * Inspect equipment and process conditions, identify issues, and take corrective action to maintain safe and reliable operations.

previous pagenext page

Showing results 21-40

All JobsCoating Inspection JobsCoating Inspection Jobs in Baltimore, MD

Coating Inspection information

See Baltimore, MD salary details

$17

$32

$57

How much do coating inspection jobs pay per hour?

As of Sep 15, 2026, the average hourly pay for coating inspection in Baltimore, MD is $32.54, according to ZipRecruiter salary data. Most workers in this role earn between $21.97 and $38.22 per hour, depending on experience, location, and employer.

What is coating inspection?

Coating inspection is the process of assessing protective coatings applied to surfaces such as steel or concrete to ensure they meet specified standards and provide adequate protection against corrosion and other environmental factors. Inspectors use a variety of tools and techniques to examine surface preparation, coating thickness, adhesion, and overall application quality. This process is critical in industries like oil and gas, construction, and manufacturing to extend the lifespan of structures and equipment, maintain safety, and comply with industry regulations.

What are the key skills and qualifications needed to thrive as a coating inspector, and why are they important?

To thrive as a Coating Inspector, you need a solid understanding of coating application methods, surface preparation standards, and common industry specifications, often supported by certifications like NACE or SSPC. Familiarity with inspection tools such as dry film thickness gauges, holiday detectors, and documentation systems is crucial. Attention to detail, strong observational skills, and effective communication help ensure accurate reporting and collaboration with project teams. These skills are vital for maintaining quality standards, ensuring compliance, and preventing costly failures in coating projects.

What are some common challenges faced by coating inspectors during large-scale projects, and how can they be addressed?

Coating inspectors often encounter challenges such as working in difficult environmental conditions, coordinating with multiple contractors, and ensuring strict adherence to project specifications. Managing varying surface preparation standards and overcoming communication gaps between the inspection team and applicators are also common. These challenges can be addressed by staying up-to-date with industry standards, maintaining clear documentation, and fostering strong communication with all project stakeholders to ensure high-quality and compliant results.

What is the difference between Coating Inspection vs NDT (Non-Destructive Testing)?

AspectCoating InspectionNDT (Non-Destructive Testing)
CertificationsSSPC, NACE, AWS coatings certificationsASNT, AWS NDT certifications
Work EnvironmentIndustrial sites, construction, manufacturingIndustrial, aerospace, oil & gas, manufacturing
Primary FocusAssessing coating quality, thickness, adhesionDetecting flaws, cracks, or defects without damage

Coating Inspection primarily involves evaluating the quality and application of protective coatings, focusing on thickness, adhesion, and surface preparation. NDT, on the other hand, involves testing materials for internal or surface flaws without causing damage. While both roles require specialized certifications and are used in industrial settings, they serve different purposes: coating inspectors ensure coatings are properly applied, whereas NDT technicians detect hidden defects in materials.

How much do coating inspectors make in the US?

Coating inspectors in the US typically earn between $40,000 and $70,000 annually, depending on experience, certifications, and location. Entry-level inspectors may start around $35,000, while experienced professionals with certifications like NACE or SSPC can earn over $80,000. The job often requires knowledge of inspection tools and safety protocols.

How to become a coating inspection?

To become a coating inspector, typically one needs a high school diploma or equivalent, along with specialized training in coating technologies and inspection methods. Certification such as the NACE CIP (Coating Inspector Program) or SSPC certifications are often required or preferred, and gaining experience in surface preparation, coating application, and quality control is valuable. Strong attention to detail, knowledge of safety standards, and familiarity with inspection tools are essential for success in this role.

Is coating inspection a stressful job?

Coating inspection can be stressful due to the need for precision and attention to detail when assessing surface quality and adherence to standards. Inspectors often work in challenging environments, such as outdoors or at heights, and must meet strict deadlines, which can contribute to job-related stress. However, the role also offers clear procedures and training to help manage workload and expectations.

What are popular job titles related to Coating Inspection jobs in Baltimore, MD?

For Coating Inspection jobs in Baltimore, MD, the most frequently searched job titles are:

What job categories do people searching Coating Inspection jobs in Baltimore, MD look for?

The top searched job categories for Coating Inspection jobs in Baltimore, MD are:

Coating Inspection jobs near you
Infographic showing various Coating Inspection job openings in Baltimore, MD as of September 2026, with employment types broken down into 92% Full Time, and 8% Part Time. Highlights an 100% In-person job distribution, with an average salary of $67,691 per year, or $32.5 per hour.

Mechanical Engineering Technician II

Gaithersburg, MD • On-site

Vision Point Systems, Inc.
IT Services • 11 - 50 employees
Learn more about Vision Point Systems, Inc.external

Full-time

Medical, Dental, Vision, Life, Retirement

Posted 19 days ago

Job description

Vision Point Systems, Inc. is currently recruiting for a talented, innovative engineering technician. This position is housed onsite at customer locations in Bethesda, Maryland and Olney, MD. Duties include, but are not limited to the following: 

  • Prepare corrosion testing specimens to include abrasive blasting of metal coupons, coating applications using various techniques including spray painting, rolling, and brush among others. 
  • Collect objective quality evidence (OQE) that specimens were prepared correctly. This may include verifying metal coupon surface profiles/roughness, checking coating film thickness, or otherwise comparing specimen preparation techniques against manufacturer-recommended specifications. 
  • Assist with design and construction of test apparatuses to include rapid prototyping, basic machining, and assembly. 
  • Maintain functionality of equipment (bench-top testing equipment, large scale corrosion cabinets, blasting cabinets, etc.), including troubleshooting non-functioning equipment, replacing broken components, checking equipment calibration, and scheduling for calibration to be performed. 
  • Assist engineers with test program execution. This may involve performance of laboratory and/or field tests, helping with specimen evaluation and data collection, and/or performing various inspections in support of corrosion-related projects. 
  • Assist Government personnel with laboratory upkeep. This may include maintaining hazardous materials inventory lists, organizing laboratory inventory, and assisting with general maintenance and cleaning of laboratory spaces. 

Requirements

  • Must possess a high school diploma or GED. 
  • Must be able to obtain and maintain a DoD Secret Security Clearance. 
  • Be able to work independently and be a self-starter. 
  • Must demonstrate qualities to work with precision and pay special attention to details. 
  • Must demonstrate strong verbal and written communication skills 
  • Must have 2+ years of experience working in a lab type setting or some type of equivalent experience. 
  • Must be willing to work in both Bethesda, MD and Olney, MD to meet customer requirements.  

Desired Skill(s): 

  • Experience working with and supporting DoW programs is highly desired. 
  • Experience with materials and mechanical testing, corrosion prevention, coatings application and evaluation, and vehicle/ship platforms is desired. 
  • Experience collecting and compiling data is desired.
  • Associates degree or higher in Science, Engineering, Engineering Technology, or related field is desired.  

Benefits

Full time employees with Vision Point Systems qualify for a generous benefits plan to include medical, dental, 1x your salary in life insurance, and short and long term disability. VPS also offers 401k participation and matching.

Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws.