ZipRecruiter

Log In

1

Cnc Operator Jobs in Denison, TX (NOW HIRING)

Allied Reliability

Whisker Operator

Sherman, TX · On-site

$15.25 - $18/hr

Operating one whisker machine with ability to operate either machine at one time. * Adjusting dies, feed mechanisms, alignments, and all other machine parameters to achieve objectives.

VOLT

Production Operator

Sherman, TX · On-site

$17.50/hr

As a Production Operator you will: * Perform various production operations associated with the processing of VCSEL wafers and product test assemblies * Be an active member of the team and meet the ...

TradeJobsWorkforce

Costco Forklift Operator

Albany, OK · On-site

$16.50 - $19.50/hr

Were looking for a Costco Forklift Operator to operate forklifts to move pallets, load trucks, and support warehouse operations. Interact with customers and colleagues in a professional manner. Work ...

Commercial Metals Company

Post Shop Operator

Durant, OK · On-site

$13.75 - $16.50/hr

Whether you will spend your day brainstorming in an office cubicle, operating a crane, running manufacturing equipment or troubleshooting technical obstacles, at CMC, you'll get the training and ...

Commercial Metals Company

Post Shop Operator

Durant, OK · On-site

$13.75 - $16.50/hr

Whether you will spend your day brainstorming in an office cubicle, operating a crane, running manufacturing equipment or troubleshooting technical obstacles, at CMC, you'll get the training and ...

New Vision Manufacturing

Forklift Operator

Madill, OK · On-site

$17/hr

Forklifts promote our Built-on Safety mindset while efficiently moving materials needed for production to required locations. Forklifts will move up to two units of lumber or completed trusses at a ...

New Vision Manufacturing

Forklift Operator

Madill, OK · On-site

$14.50 - $17/hr

Forklifts promote our Built-on Safety mindset while efficiently moving materials needed for production to required locations. Forklifts will move up to two units of lumber or completed trusses at a ...

Denison Industries

Core Maker / Machine Operator

Denison, TX · On-site

$14.75 - $17.75/hr

CORE MAKER/MACHINE OPERATOR Employment Status: Full Time FLSA Status: Hourly Non-Exempt Department: Core Room Position Reports To: Core Room Supervisor/Lead Summary Description: Produce sand cores ...

previous pagenext page

Showing results 21-40

All JobsCnc Operator JobsCnc Operator Jobs in Denison, TX

Cnc Operator information

See Denison, TX salary details

$12

$20

$28

How much do cnc operator jobs pay per hour?

As of Sep 6, 2026, the average hourly pay for cnc operator in Denison, TX is $20.67, according to ZipRecruiter salary data. Most workers in this role earn between $17.21 and $23.51 per hour, depending on experience, location, and employer.

What is a CNC operator?

CNC Operators, or Computer Numerical Control Operators, are skilled professionals who set up, operate, and maintain CNC machines used in manufacturing. They read blueprints, load materials, monitor machine performance, and ensure that components are produced to precise specifications. CNC Operators play a crucial role in producing parts for industries such as automotive, aerospace, and electronics, ensuring both quality and efficiency in the production process.

What are the key skills and qualifications needed to thrive as a CNC operator, and why are they important?

To thrive as a CNC Operator, you need a solid understanding of machining processes, blueprint reading, and precision measurement, typically supported by a high school diploma or technical training in manufacturing. Familiarity with CNC programming software, machine controls, and tools like calipers and micrometers is essential, and certifications such as NIMS can be beneficial. Attention to detail, problem-solving abilities, and strong teamwork skills help operators maintain quality and efficiency on the shop floor. These skills are crucial for ensuring accurate production, minimizing errors, and achieving high standards in a manufacturing environment.

What is a CNC machine used for?

A CNC (computer numerical control) machine or router dictates the actions of electromechanical devices. By adding computer programming inputs into the CNC router, a CNC operator (or CNC programmer) can manipulate devices, such as shop machines, into mechanically producing components out of stock material. CNC machines interpret programmed designs as instructions for cutting, sculpting, and finishing prototype parts. CNC is an accurate and repeatable method of machining. Another common CNC method is 3D printing technology.

What are some common challenges CNC operators face when interpreting technical drawings and how can they overcome them?

CNC Operators often encounter challenges when interpreting complex technical drawings or blueprints, especially when details are unclear or measurements are highly precise. To overcome these challenges, operators should communicate proactively with engineers or supervisors to clarify any ambiguities and ensure they fully understand the part specifications. Additionally, staying updated on GD&T (Geometric Dimensioning and Tolerancing) standards and regularly practicing blueprint reading can significantly improve accuracy and efficiency on the job.

What is the difference between Cnc Operator vs Machinist?

AspectCnc OperatorMachinist
CredentialsHigh school diploma, CNC certificationHigh school diploma, technical training, CNC certification often preferred
Work EnvironmentManufacturing plants, machine shopsMachine shops, manufacturing facilities, workshops
Job FocusOperate CNC machines following specific instructionsDesign, set up, and operate various machine tools, including CNC
Common UsageEntry to mid-level manufacturing rolesSkilled trades, complex machining tasks

While both roles involve working with CNC machinery, a Cnc Operator primarily focuses on operating CNC machines based on set instructions, often with less emphasis on machine setup or design. A Machinist typically has broader responsibilities, including machine setup, maintenance, and sometimes designing parts. Both roles require technical skills and certifications, but Machinists usually possess more advanced machining knowledge and experience.

How much do CNC operators earn?

CNC operators typically earn between $40,000 and $60,000 annually, depending on experience, location, and industry. Skilled operators with certifications and proficiency in CNC programming can earn higher wages and may receive benefits such as overtime pay and health insurance.

Is a CNC operator a hard job?

A CNC operator's job involves setting up, operating, and maintaining computer numerical control machines, which requires attention to detail, technical skills, and understanding of blueprints and measurements. The work can be physically demanding and may involve working in shifts or in environments with noise and safety precautions. Proper training and certifications can help ease the learning curve and improve job performance.
More about Cnc Operator jobs

What cities near Denison, TX are hiring for Cnc Operator jobs?

Cities near Denison, TX with the most Cnc Operator job openings:

Cnc Operator jobs near you
Infographic showing various Cnc Operator job openings in Denison, TX as of August 2026, with employment types broken down into 46% Full Time, 51% Part Time, 2% Contract, and 1% Nights. Highlights an 99% Physical, and 1% Remote job distribution, with an average salary of $42,989 per year, or $20.7 per hour.

Whisker Operator

Allied Reliability

Sherman, TX • On-site

$15.25 - $18/hr

Full-time

Re-posted 8 days ago

Key responsibilities

  • Operate and adjust whisker machines to meet production objectives.

  • Troubleshoot machine issues, replace worn parts, and escalate major problems to Maintenance.

  • Load raw materials, unload finished whiskers, and package products for storage and shipping.

Job description

Essential Job Functions:
  • Operating one whisker machine with ability to operate either machine at one time.
  • Adjusting dies, feed mechanisms, alignments, and all other machine parameters to achieve objectives.
  • Troubleshooting machine problems and replacing worn or broken machine parts as required.
  • Escalating major equipment issues to Maintenance Team.
  • Performing product changes when and where needed.
  • Loading coils of flat steel on the turntables using a forklift.
  • Unloading whiskers from the machine, bundling them and packaging into boxes.
  • Weighing, moving, and organizing boxes of whiskers using carts and forklifts.
  • Meeting all quality and production standards, minimizing scrap and downtime.
  • Labeling, packaging, and palletizing boxes of whiskers for storage, inventory, and shipping.
Key Competencies:
  • Performing all job functions in a safe manner, follow and enforce all policies and procedures.
  • Leading housekeeping efforts and always maintaining a clean and safe work environment.
  • Identifying and immediately communicating personnel and safety issues to the Shift Supervisor and assisting with investigations and resolutions of the issues if needed.
  • Communicating and working with Material Handlers to ensure an appropriate quantity and quality of raw materials is delivered to the Whisker Department as needed.
  • Accurate and complete reporting of production and quality data both manually and in computer systems.
  • Reporting any continuous improvement opportunities to the Shift Supervisor.
  • Moving materials as needed using forklifts or overhead cranes.
Preferred Requirements:
  • Excellent safety and attendance record.
  • Ability to work 12 hour rotating day and night shifts, and report on time for scheduled shifts and follow company attendance policies.
  • Possesses strong communication skills both written and verbal.
  • Possesses basic knowledge in math, addition, subtraction, multiplication, division, and percentages.
  • Possesses basic computer skills.
  • Possesses exceptional problem-solving skills.
  • Understands production rates and production schedules.
  • Ability to balance and achieve results in the areas of Safety, Quality, Productivity and Cost Reduction
  • Must have the ability to complete two or more tasks simultaneously.
  • Self-motivated and able to work with little or no supervision and maintain a working and up-to-date knowledge of products and services.
  • Must be able to handle self in a professional manner with co-workers and supervisors.
  • Ability to take responsibility for self and team.
  • Must be able to stand and walk for extended periods of time.
  • Must be able to continually bend, stoop, crouch, reach above shoulder, use arms, wrists, grasp and squeeze with hands, access constricted spaces, and lift and carry up to 75 lbs.
  • Must be able to withstand occasional exposure to dusty or dirty ambient conditions.
  • Must be able to withstand occasional exposure to hot or cold ambient conditions.
  • Must be able to withstand occasional exposure to mild chemical irritants.
  • Working knowledge of manufacturing equipment.
Training:
  • Training would be a mixture of online training on safety, quality, and production procedures along with on-the-job training conducted by an experienced Whisker Operator.
  • Additional training would be provided as needed by the Maintenance Technicians or Maintenance Manager.
  • Training duration would normally be 2 months.

#LI-JJ1