ZipRecruiter

Log In

1

Cmm Programmer Jobs in Portland, OR (NOW HIRING)

Staffmark

Be Seen First

Quality Inspector

Hillsboro, OR · On-site

$22/hr

Perform basic CMM inspections and measurements. * Identify, document, and communicate quality issues while supporting corrective actions. * Collaborate with production, engineering, suppliers, and ...

Staffmark

Quality Inspector

Hillsboro, OR · On-site

$22/hr

Perform basic CMM inspections and measurements. * Identify, document, and communicate quality issues while supporting corrective actions. * Collaborate with production, engineering, suppliers, and ...

Vigor, LLC

Machinist/Metrology Tech I

Portland, OR · On-site

$43.50/hr

Reverse engineer - shafts, flanges, bushings, etc. that come off the ship and provide sketches for ... CMM's. * Tasks range from setting modules or equipment, checking flatness and creating deviation ...

Vigor, LLC

Machinist/Metrology Tech I

Portland, OR · On-site

$43.50/hr

Reverse engineer - shafts, flanges, bushings, etc. that come off the ship and provide sketches for ... CMM's. * Tasks range from setting modules or equipment, checking flatness and creating deviation ...

Vigor, LLC

Machinist/Metrology Tech I

Portland, OR · On-site

$43.50/hr

Reverse engineer - shafts, flanges, bushings, etc. that come off the ship and provide sketches for ... CMM's. * Tasks range from setting modules or equipment, checking flatness and creating deviation ...

CoorsTek

CNC Process Engineer II or III

Hillsboro, OR

$79K - $101K/yr

Job Title CNC Process Engineer II or III As the CNC Process Engineer, you will be responsible for ... Interpret CMM reports and validate inspection techniques. * Utilize SPC methods to monitor process ...

CoorsTek

CNC Process Engineer II or III

Hillsboro, OR · On-site

$100 - $125/hr

Job Title CNC Process Engineer II or III. As the CNC Process Engineer, you will be responsible for ... Interpret CMM reports and validate inspection techniques. Utilize SPC methods to monitor process ...

CoorsTek, Inc.

CNC Process Engineer II or III

Hillsboro, OR · On-site

$79K - $101K/yr

Job Title CNC Process Engineer II or III As the CNC Process Engineer, you will be responsible for ... Interpret CMM reports and validate inspection techniques. * Utilize SPC methods to monitor process ...

Ascentec Engineering LLC

Quality Inspector II

Tualatin, OR · On-site

$18 - $26/hr

Experience with operating manual and/or automated CMM * Generate Clear and concise Non-conformance ... Ascentec Engineering is an Equal Opportunity Employer; employment with Ascentec Engineering is ...

Ascentec Engineering

Quality Inspector I

Tualatin, OR · On-site

$17 - $24/hr

Experience with operating manual and/or automated CMM a plus * Generate Clear and concise Non ... Ascentec Engineering is an Equal Opportunity Employer; employment with Ascentec Engineering is ...

previous page

Showing results 41-60

All JobsCmm Programmer JobsCmm Programmer Jobs in Portland, OR

Cmm Programmer information

See Portland, OR salary details

$18

$33

$49

How much do cmm programmer jobs pay per hour?

As of Sep 9, 2026, the average hourly pay for cmm programmer in Portland, OR is $33.85, according to ZipRecruiter salary data. Most workers in this role earn between $28.03 and $38.75 per hour, depending on experience, location, and employer.

What is a CMM programmer?

CMM Programmers are professionals who operate and program Coordinate Measuring Machines (CMMs) used in manufacturing and quality control. They create and modify programs that guide the CMM to measure the physical geometrical characteristics of an object, ensuring it meets design specifications. CMM Programmers often work with CAD models, interpret technical drawings, and analyze measurement data to maintain product quality and consistency. Their expertise is essential in industries where precision and accuracy are critical, such as aerospace, automotive, and manufacturing.

What are some common challenges CMM programmers face when working with complex parts or tight tolerances?

CMM Programmers often encounter challenges when measuring complex geometries or parts with very tight tolerances, as these require precise programming and thorough understanding of both the CMM software and the part's specifications. Interpreting intricate engineering drawings and selecting the correct probing strategies are critical to avoid measurement errors. Additionally, collaborating closely with quality engineers and production teams is essential to resolve discrepancies and ensure parts meet all requirements. Continuous learning and adaptability are important, as technology and part designs are always evolving in this field.

What are the key skills and qualifications needed to thrive as a CMM programmer, and why are they important?

To thrive as a CMM Programmer, you need expertise in precision measurement, geometric dimensioning and tolerancing (GD&T), and a background in manufacturing or engineering, often supported by relevant technical certifications. Familiarity with CMM software such as PC-DMIS or Calypso, as well as the ability to interpret blueprints and use CAD systems, is essential. Strong problem-solving skills, attention to detail, and effective communication help ensure accuracy and collaboration with quality and production teams. These skills are crucial for maintaining high manufacturing standards, reducing errors, and ensuring components meet strict specifications.

What is the difference between Cmm Programmer vs Cnc Machinist?

AspectCmm ProgrammerCnc Machinist
CredentialsOften requires technical certifications or training in CMM programmingTypically needs machining experience and technical skills, sometimes certifications
Work EnvironmentWorks in quality control labs or manufacturing settings focusing on measurement and inspectionOperates CNC machines in manufacturing or production environments
Industry UsageCommonly used in industries requiring precise measurements, such as aerospace and automotiveUsed across manufacturing sectors for producing parts and components

The main difference is that a Cmm Programmer specializes in programming Coordinate Measuring Machines to inspect parts, while a Cnc Machinist operates CNC machines to produce parts. Both roles are essential in manufacturing, but they focus on different stages of the production process.

Are Cmm programmers in demand?

CMM programmers are in demand in manufacturing and quality control industries that require precise measurement and inspection of parts using coordinate measuring machines. Their skills in programming and operating CMM equipment are valuable for ensuring product quality, especially in aerospace, automotive, and industrial sectors where strict tolerances are required.

How much do Cmm programmers make in the US?

CMM programmers in the US typically earn between $50,000 and $80,000 annually, depending on experience, certifications, and location. Skilled programmers with proficiency in programming languages and CMM inspection tools can earn higher salaries, especially in manufacturing and quality control environments.

What is the future of Cmm programming?

CMM (Coordinate Measuring Machine) programming is expected to remain important in manufacturing for quality control and precision measurement, with increasing integration of automation and CAD/CAM software. As manufacturing advances, skills in programming, calibration, and understanding of metrology tools will continue to be valuable for CMM programmers.
More about Cmm Programmer jobs

What are popular job titles related to Cmm Programmer jobs in Portland, OR?

For Cmm Programmer jobs in Portland, OR, the most frequently searched job titles are:

What job categories do people searching Cmm Programmer jobs in Portland, OR look for?

The top searched job categories for Cmm Programmer jobs in Portland, OR are:

What cities near Portland, OR are hiring for Cmm Programmer jobs?

Cities near Portland, OR with the most Cmm Programmer job openings:

Cmm Programmer jobs near you
Infographic showing various Cmm Programmer job openings in Portland, OR as of August 2026, with employment types broken down into 72% Full Time, and 28% Contract. Highlights an 100% In-person job distribution, with an average salary of $70,417 per year, or $33.9 per hour.

Installation Metrology / Testing Engineer

Tualatin, OR • On-site

Fulcrum Technologies, Inc.
See more jobs at Fulcrum Technologies, Inc.external

$100 - $125/hr

Other

Re-posted 25 days ago

Job description

Installation Metrology / Testing Engineer About this position

About Fulcrum Technologies, Inc.

Fulcrum Technologies, Inc. is the industry leader in the design and custom manufacture of machine bases for vibration sensitive production tools used in the Extreme Ultra Violet (EUV) Photo-lithography semiconductor manufacturing process We are seeking a highly motivated and experienced Metrology and Test Engineer with a strong background in 3D measurement technologies, test and measurement systems, signal processing, and spectral and modal analysis to support our rapidly growing business.

As a Metrology/Testing Engineer, you will be responsible to use high accuracy 3D laser measurement instrumentation, signal processing equipment and software to perform final and in-process inspections on critical components, prepare reports and review with customers. Perform other duties such as dimensional layouts and calibrations when required. The ideal candidate would have experience using FARO Laser Trackers, CMM arms and Verisurf software or similar metrology software (PolyWorks, SpatialAnalyzer, etc.). Experience with DataPhysics spectrum analyzers a plus. This is a salaried non-exempt position.

Essential Duties and Responsibilities:

  • Ensure correct and accurate placement and proper mounting of pedestals and seismic restraint components to meet criteria specified by lithography equipment manufacturers
  • Provide onsite technical guidance to customers and their installation support contingent workers in the receipt, installation, and readying of pedestal package for applicable vibration and stiffness testing.
  • Perform dimensional inspection and/or fabrication support measurements using CMM equipment and metrology software.
  • Develop inspection plans and procedures based on requirements for inspection and/or production support.
  • Accurately document the results of the inspections and complete Customer documentation in a timely manner.
  • Review Fulcrum Design drawings to assure compliance with Customer requirements.
  • Provides testing, survey and troubleshooting in the following areas: Vibration, Stiffness, EMI, ESD, Acoustic
  • Work with high-precision instruments and tools to meet stringent specifications.
  • Ensure compliance with industry standards.
  • Document installation and testing results.
  • Train other Install Techs on EUV installation and testing processes.
  • Serve as the primary liaison between internal departments, external vendors, and customer teams to coordinate all logistics related to equipment installation and testing
  • Ensure all installation and testing documentation is complete, accurate, and meets internal and customer-specific requirements.
  • Collaborate effectively with production staff, field technicians, external contractors, and client representatives.

Job Requirements:

  • Minimum 2 years of work-related test and measurement experience.
  • Knowledge of trigonometric functions to calculate dimensions and XYZ coordinate systems.
  • Proficient in interpretation of Geometric Dimensioning & Tolerancing (GD&T).
  • Excellent understanding of signal processing and modal analysis.
  • Able to multitask, prioritize, show extreme resourcefulness and problem-solving skills, and perform well under pressure.
  • Shall uphold a high standard of personal conduct to maintain physical and virtual access credentials for being on a customer work site.
  • Travel is an integral part of this role, and is based on customer schedules. 60-80% travel is to be expected. Act as your own travel agent to plan and book domestic and international business trips. This includes, but is not limited to booking airfare, rental vehicle, and obtaining lodging within Fulcrum established budgets.
  • Valid driver’s license and clean driving record
  • Valid passport, or ability to obtain one within one (1) month of hire date
  • Must be able to successfully complete a criminal background and drug screen
  • Must be able to successfully meet customer site access requirements such as background checks, safety training, and cleanroom access (gowning and breathing apparatus [as applicable]).
  • Excellent/Advanced verbal and written communications skills to work effectively with co-workers, supervisors, and customers
  • Proficient in Microsoft Office Suite
  • Work is conducted in a dynamic, fast-paced setting with moderate to loud noise levels from production activity in a custom metal fabrication shop.
  • When working at customer sites, will be in an environmentally controlled clean room wearing customer provided complete coverage “bunny suit”.
  • Must be able to frequently bend, squat, crawl, twist and may be required to lift up to 50 pounds.
  • Personal Protection Equipment (PPE) is required. All PPE to be provided by Fulcrum.

About Fulcrum Technologies, Inc.

Fulcrum Technologies, Inc. is the industry leader in the design and custom manufacture of machine bases for vibration sensitive production tools used in the Extreme Ultra Violet (EUV) Photo-lithography semiconductor manufacturing process We are seeking a highly motivated and experienced Metrology and Test Engineer with a strong background in 3D measurement technologies, test and measurement systems, signal processing, and spectral and modal analysis to support our rapidly growing business.


As a Metrology/Testing Engineer, you will be responsible to use high accuracy 3D laser measurement instrumentation, signal processing equipment and software to perform final and in-process inspections on critical components, prepare reports and review with customers. Perform other duties such as dimensional layouts and calibrations when required. The ideal candidate would have experience using FARO Laser Trackers, CMM arms and Verisurf software or similar metrology software (PolyWorks, SpatialAnalyzer, etc.). Experience with DataPhysics spectrum analyzers a plus. This is a salaried non-exempt position.

Essential Duties and Responsibilities:

  • Ensure correct and accurate placement and proper mounting of pedestals and seismic restraint components to meet criteria specified by lithography equipment manufacturers
  • Provide onsite technical guidance to customers and their installation support contingent workers in the receipt, installation, and readying of pedestal package for applicable vibration and stiffness testing.
  • Perform pre-installation site surveys.
  • Perform dimensional inspection and/or fabrication support measurements using CMM equipment and metrology software.
  • Develop inspection plans and procedures based on requirements for inspection and/or production support.
  • Accurately document the results of the inspections and complete Customer documentation in a timely manner.
  • Review Fulcrum Design drawings to assure compliance with Customer requirements.
  • Provides testing, survey and troubleshooting in the following areas: Vibration, Stiffness, EMI, ESD, Acoustic
  • Work with high-precision instruments and tools to meet stringent specifications.
  • Ensure compliance with industry standards.
  • Document installation and testing results.
  • Train other Install Techs on EUV installation and testing processes.
  • Serve as the primary liaison between internal departments, external vendors, and customer teams to coordinate all logistics related to equipment installation and testing
  • Ensure all installation and testing documentation is complete, accurate, and meets internal and customer-specific requirements.
  • Collaborate effectively with production staff, field technicians, external contractors, and client representatives.

Job Requirements:

  • Minimum 2 years of work-related test and measurement experience.
  • Knowledge of trigonometric functions to calculate dimensions and XYZ coordinate systems.
  • Proficient in interpretation of Geometric Dimensioning & Tolerancing (GD&T).
  • Excellent understanding of signal processing and modal analysis.
  • Able to multitask, prioritize, show extreme resourcefulness and problem-solving skills, and perform well under pressure.
  • Shall uphold a high standard of personal conduct to maintain physical and virtual access credentials for being on a customer work site.
  • Travel is an integral part of this role, and is based on customer schedules. 60-80% travel is to be expected. Act as your own travel agent to plan and book domestic and international business trips. This includes, but is not limited to booking airfare, rental vehicle, and obtaining lodging within Fulcrum established budgets.
  • Valid driver’s license and clean driving record
  • Valid passport, or ability to obtain one within one (1) month of hire date
  • Must be able to successfully complete a criminal background and drug screen
  • Must be able to successfully meet customer site access requirements such as background checks, safety training, and cleanroom access (gowning and breathing apparatus [as applicable]).
  • Excellent/Advanced verbal and written communications skills to work effectively with co-workers, supervisors, and customers
  • Proficient in Microsoft Office Suite

Job Environment:

  • Work is conducted in a dynamic, fast-paced setting with moderate to loud noise levels from production activity in a custom metal fabrication shop.
  • When working at customer sites, will be in an environmentally controlled clean room wearing customer provided complete coverage “bunny suit”.
  • Must be able to frequently bend, squat, crawl, twist and may be required to lift up to 50 pounds.
  • Personal Protection Equipment (PPE) is required. All PPE to be provided by Fulcrum.

The pay range for this role is:
85,000 - 120,000 USD per year(Tualatin HQ)
#J-18808-Ljbffr

Apply