1

Chemical Engineer Graduate Jobs in Minnesota (NOW HIRING)

Operating Engineer

Bloomington, MN

$69K - $94K/yr

... chemical treatment and its associated feed equipment, clean and maintain cooling towers, and ... Graduate of apprentice program or trade school preferred IMPORTANT EXPERIENCE 5+ years of related ...

Operating Engineer

Bloomington, MN · On-site

$69K - $94K/yr

... chemical treatment and its associated feed equipment, clean and maintain cooling towers, and ... Graduate of apprentice program or trade school preferred IMPORTANT EXPERIENCE 5+ years of related ...

Operating Engineer

Bloomington, MN

$69K - $94K/yr

... chemical treatment and its associated feed equipment, clean and maintain cooling towers, and ... Graduate of apprentice program or trade school preferred IMPORTANT EXPERIENCE 5+ years of related ...

Operating Engineer

Bloomington, MN · On-site

$69K - $94K/yr

... chemical treatment and its associated feed equipment, clean and maintain cooling towers, and ... Graduate of apprentice program or trade school preferred IMPORTANT EXPERIENCE • 5+ years of ...

Experience and Education: * BS degree in Chemical, Mechanical, or other related engineering discipline - required * Graduate Degree (M.S. or Ph.D.) or P.E. certification - preferred * 10 or more ...

Showing results 21-40

Chemical Engineer Graduate information

See Minnesota salary details

$39.2K

$85.7K

$137.1K

How much do chemical engineer graduate jobs pay per year?

As of Aug 9, 2026, the average yearly pay for chemical engineer graduate in Minnesota is $85,685.00, according to ZipRecruiter salary data. Most workers in this role earn between $66,100.00 and $104,300.00 per year, depending on experience, location, and employer.

What are the qualifications to get a job as a chemical engineer graduate?

The qualifications that you need to get an entry-level engineering job as a graduate of a chemical engineer program include a relevant degree and demonstrable research, lab, or analysis skills. You can gain experience during your undergraduate studies by taking part in an internship program or assisting in academic research at your university. You can obtain a bachelor’s degree in chemical engineering, though some schools offer a five-year program that leads to a master’s degree in chemical engineering.

What types of projects and responsibilities can a chemical engineer graduate expect during their first year on the job?

As a Chemical Engineer Graduate, you can anticipate working on a variety of projects that may include process optimization, safety assessments, and assisting with the design or scale-up of chemical processes. Typically, you'll support senior engineers by collecting and analyzing data, running simulations, and preparing technical reports. Collaboration is key, and you'll often work closely with multidisciplinary teams including mechanical engineers, quality assurance staff, and plant operators. This early exposure helps you build foundational skills and gain insights into different areas of the chemical engineering field.

What are the key skills and qualifications needed to thrive as a chemical engineer graduate, and why are they important?

To thrive as a Chemical Engineer Graduate, you need a solid understanding of chemical engineering principles, process design, and analytical problem-solving, typically backed by a relevant engineering degree. Familiarity with industry-standard software such as Aspen Plus or MATLAB, and knowledge of safety and quality regulations, are often required. Strong teamwork, effective communication, and adaptability are crucial soft skills for collaborating on projects and conveying technical information. These skills and qualities are vital to ensure safe, efficient, and innovative solutions in diverse engineering environments.

What does a chemical engineer graduate do?

A Chemical Engineer Graduate typically assists in designing, developing, and optimizing processes for producing chemicals, fuels, food, pharmaceuticals, and other products. They apply principles of chemistry, physics, biology, and math to solve problems involving the production or use of chemicals. Graduates often work under the supervision of senior engineers and may be involved in research, process development, safety analysis, or quality control. Over time, they gain experience and may take on more complex projects or leadership roles.

What is the difference between Chemical Engineer Graduate vs Chemical Technician?

AspectChemical Engineer GraduateChemical Technician
Required CredentialsBachelor's degree in chemical engineering or related fieldAssociate degree or diploma in chemical technology
Work EnvironmentDesign, develop, and optimize chemical processes, often in labs or plant settingsAssist in process operations, sampling, and quality control in manufacturing plants
Employer & Industry UsageEngineering firms, manufacturing, energy, pharmaceuticalsManufacturing plants, laboratories, production facilities

The main difference between a Chemical Engineer Graduate and a Chemical Technician lies in their education, responsibilities, and work scope. Chemical Engineer Graduates focus on designing and improving chemical processes, requiring a bachelor's degree, while Chemical Technicians support these processes through hands-on tasks with an associate degree. Both roles are essential in the chemical industry but serve different functions based on their training and responsibilities.

What are popular job titles related to Chemical Engineer Graduate jobs in Minnesota? For Chemical Engineer Graduate jobs in Minnesota, the most frequently searched job titles are:
What job categories do people searching Chemical Engineer Graduate jobs in Minnesota look for? The top searched job categories for Chemical Engineer Graduate jobs in Minnesota are:
Infographic showing various Chemical Engineer Graduate job openings in Minnesota as of July 2026, with employment types broken down into 2% As Needed, 70% Full Time, 25% Part Time, 1% Temporary, and 2% Contract. Highlights an 91% Physical, 1% Hybrid, and 8% Remote job distribution, with an average salary of $85,685 per year, or $41.2 per hour.

$69K - $94K/yr

Full-time

Medical, Dental, Vision, Life, Retirement

Re-posted 11 days ago


Cushman & Wakefield rating

7.4

Company rating: 7.4 out of 10

Based on 158 frontline employees who took The Breakroom Quiz

110th of 202 rated real estate companies


Job description

Job Title

Operating Engineer

Job Description Summary

Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties

Job Description


ESSENTIAL FUNCTIONS AND RESPONSIBILITIES
Perform all plumbing, electrical, or HVAC requirements of the building(s)
Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.
Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings
Verify field conditions and perform any necessary repairs or adjustments
Monitor Energy Management
Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property
Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)
Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.
Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris
Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management
Document and report activities to supervisor
Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns
Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits
Complete all required C&W Safety Training as scheduled annually
Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours
KEY COMPETENCIES
Technical Proficiency
Initiative
Flexibility
Multi-Tasking
Sense of Urgency
IMPORTANT EDUCATION
High School Diploma of GED Equivalent
Graduate of apprentice program or trade school preferred
IMPORTANT EXPERIENCE
5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting
ADDITIONAL ELIGIBILITY QUALIFICATIONS
Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)
May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements
Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable)
Basic Computing Skills in Outlook, Excel & Word
Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.
Knowledgeable in energy management systems, techniques and operations.
Thorough knowledge in all building systems operations, maintenance and repair.
May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call duties
WORK ENVIRONMENT
This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices
Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine
Involves movement between departments, floors, and properties to facilitate work
Ability to speak clearly so others can understand you
Ability to read and understand information presented orally and in writing
Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematics
OTHER DUTIES
This job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.


Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements.
The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications.
The company will not pay less than minimum wage for this role.
The compensation for the position is: $31.45 - $37.00Cushman & Wakefield is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated.

In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or emailAccommodations@cushwake.com. Please refer to the job title and job location when you contact us.

INCO: "Cushman & Wakefield"

What Cushman & Wakefield employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom