ZipRecruiter

Log In

1

Cawi Inspector Jobs in Texas (NOW HIRING)

TPC Group Inc.

Maintenance Inspector

Houston, TX · On-site

Under direct responsibility of Inspection Supervision, HNO Maintenance Inspector shall act as a ... CWI or CAWI * Level II or III PT, MT, UTT * Film Interpretation Job Location: * Houston Applicants ...

TPC Group Inc.

Maintenance Inspector

Houston, TX · On-site

Under direct responsibility of Inspection Supervision, HNO Maintenance Inspector shall act as a ... CWI or CAWI * Level II or III PT, MT, UTT * Film Interpretation Job Location: * Houston Applicants ...

TPC Group

Maintenance Inspector

Houston, TX · On-site

Under direct responsibility of Inspection Supervision, HNO Maintenance Inspector shall act as a ... CWI or CAWI * Level II or III PT, MT, UTT * Film Interpretation Job Location: * Houston Applicants ...

TPC Group

Maintenance Inspector

Houston, TX · On-site

Under direct responsibility of Inspection Supervision, HNO Maintenance Inspector shall act as a ... CWI or CAWI * Level II or III PT, MT, UTT * Film Interpretation Job Location: * Houston Applicants ...

Surefitresources.com

QA/ QC CWI

Houston, TX

$40/hr

... or CAWI certified Phased Array UT Inspection operating & analyzing experience Past training / education in the areas detailed on the Manufacturing Training Matrix (MTM) Perform inspection of ...

Surefitresources.com

QA/ QC CWI

Houston, TX · On-site

$40/hr

... CWI or CAWI certified • Phased Array UT Inspection operating & analyzing experience • Past training / education in the areas detailed on the Manufacturing Training Matrix (MTM) • Perform ...

TERRACON

Construction Materials Technician II

Dallas, TX

$18.25 - $25/hr

American Welding Society (AWS) Certified Associate Welding Inspector (CAWI) * American Society for Nondestructive Testing (ASNT) Level II certification in more than one of the following areas: Visual ...

TERRACON

Construction Materials Technician II

Dallas, TX · On-site

$17 - $23/hr

American Welding Society (AWS) Certified Associate Welding Inspector (CAWI) * American Society for Nondestructive Testing (ASNT) Level II certification in more than one of the following areas: Visual ...

TERRACON

Engineering Technician II

Tyler, TX · On-site

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

American Welding Society (AWS) Certified Associate Welding Inspector (CAWI) * American Society for Nondestructive Testing (ASNT) Level II certification in more than one of the following areas: Visual ...

TERRACON

Engineering Technician II

Tyler, TX · On-site

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

American Welding Society (AWS) Certified Associate Welding Inspector (CAWI) * American Society for Nondestructive Testing (ASNT) Level II certification in more than one of the following areas: Visual ...

Thompson Pipe - USA

QA Technician II

Grand Prairie, TX · On-site

$30 - $36/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

AWS CWI (preferable) or CAWI; NDE/NDT MT, PT, RT, UT, VT (ASNT snt-tc-1a or NAS 410); NACE/ SPCC Coating Inspector; or API 510, 570, 577, or similar. * High school diploma or general education degree ...

Wood

Construction Lab Technician

Dallas, TX

$18.25 - $25/hr

American Welding Society (AWS) Certified Associate Welding Inspector (CAWI) * American Society for Nondestructive Testing (ASNT) Level II certification in more than one of the following areas: Visual ...

Thompson Pipe

QA Technician II

Grand Prairie, TX

$30 - $36/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

AWS CWI (preferable) or CAWI; NDE/NDT MT, PT, RT, UT, VT (ASNT snt-tc-1a or NAS 410); NACE/ SPCC Coating Inspector; or API 510, 570, 577, or similar. * High school diploma or general education degree ...

Thompson Pipe Group

QA Technician II

Grand Prairie, TX · On-site

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

AWS CWI (preferable) or CAWI; NDE/NDT MT, PT, RT, UT, VT (ASNT snt-tc-1a or NAS 410); NACE/ SPCC Coating Inspector; or API 510, 570, 577, or similar. * High school diploma or general education degree ...

TERRACON

Engineering Technician II

Midland, TX · On-site

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

American Welding Society (AWS) Certified Associate Welding Inspector (CAWI) * American Society for Nondestructive Testing (ASNT) Level II certification in more than one of the following areas: Visual ...

TERRACON

Engineering Technician II

Austin, TX · On-site

$19.50 - $27.50/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

American Welding Society (AWS) Certified Associate Welding Inspector (CAWI) * American Society for Nondestructive Testing (ASNT) Level II certification in more than one of the following areas: Visual ...

TERRACON

Engineering Technician II

Round Rock, TX · On-site

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

American Welding Society (AWS) Certified Associate Welding Inspector (CAWI) * American Society for Nondestructive Testing (ASNT) Level II certification in more than one of the following areas: Visual ...

next page

Showing results 1-20

All JobsCawi Inspector JobsCawi Inspector Jobs in Texas

Cawi Inspector information

See Texas salary details

$22.8K

$51.2K

$92.2K

How much do cawi inspector jobs pay per year?

As of Aug 15, 2026, the average yearly pay for cawi inspector in Texas is $51,184.00, according to ZipRecruiter salary data. Most workers in this role earn between $35,900.00 and $59,200.00 per year, depending on experience, location, and employer.

What are the key skills and qualifications needed to thrive as a CAWI inspector?

To thrive as a CAWI Inspector, you need a solid understanding of welding inspection standards, metallurgy, and quality assurance, typically supported by relevant certifications such as CAWI (Certified Associate Welding Inspector) from recognized bodies like the American Welding Society (AWS). Familiarity with inspection tools, non-destructive testing (NDT) methods, and industry-specific documentation systems is essential. Attention to detail, analytical thinking, and effective communication are valuable soft skills in this role. These skills and qualities ensure that welding work meets safety and quality standards, preventing costly defects and ensuring compliance with regulations.

What is a CAWI inspector?

A CAWI Inspector is a professional certified to perform inspections on welding processes according to the standards set by the Certification Scheme for Weld Inspection (CAWI). They are responsible for ensuring that welded joints comply with safety, quality, and regulatory requirements. CAWI Inspectors carry out visual inspections, review welding procedures, and document compliance. Their work helps prevent structural failures and maintain high standards in construction and manufacturing projects.

What are the most common challenges faced by a CAWI inspector in ensuring compliance during inspections?

CAWI Inspectors often encounter challenges such as interpreting complex regulatory standards, coordinating with onsite teams, and managing tight inspection schedules. They must balance thoroughness with efficiency, ensuring all compliance criteria are met without causing undue delays to operations. Additionally, effective communication is vital, as they frequently explain findings and corrective actions to both technical and non-technical stakeholders. Staying updated with evolving industry regulations is also essential for maintaining inspection accuracy.

What is the difference between Cawi Inspector vs Cawi Technician?

AspectCawi InspectorCawi Technician
CertificationsTypically requires specialized certifications in inspection and safety standardsOften requires technical certifications related to equipment operation and maintenance
Work EnvironmentPrimarily conducts inspections, site assessments, and safety evaluationsHandles equipment setup, maintenance, and operational tasks
Employer & Industry UsageUsed by inspection firms, safety agencies, and construction companiesEmployed by construction, energy, and industrial companies for technical support

The main difference between a Cawi Inspector and a Cawi Technician lies in their roles: inspectors focus on safety assessments and compliance, while technicians handle equipment operation and maintenance. Both roles require relevant certifications and are integral to industries like construction and energy, but their daily tasks and responsibilities differ significantly.

What are popular job titles related to Cawi Inspector jobs in Texas?

For Cawi Inspector jobs in Texas, the most frequently searched job titles are:

What job categories do people searching Cawi Inspector jobs in Texas look for?

The top searched job categories for Cawi Inspector jobs in Texas are:

What cities in Texas are hiring for Cawi Inspector jobs?

Cities in Texas with the most Cawi Inspector job openings:

Cawi Inspector jobs near you
Infographic showing various Cawi Inspector job openings in Texas as of August 2026, with employment types broken down into 80% Full Time, 9% Part Time, 1% Temporary, 9% Contract, and 1% Nights. Highlights an 97% Physical, 1% Hybrid, and 2% Remote job distribution, with an average salary of $51,184 per year, or $24.6 per hour.

Maintenance Inspector

TPC Group Inc.

Houston, TX • On-site

Full-time

Re-posted 7 days ago

Job description

Job Summary: 

Under direct responsibility of Inspection Supervision, HNO Maintenance Inspector shall act as a Lead Unit Inspector and shall be responsible for ensuring the mechanical integrity of the fixed mechanical equipment inside their assigned unit which includes pressure vessels, storage tanks, piping and piping components (e.g., valves), filters, heat exchangers, heaters, boilers, relief devices, platforms, ladders, handrails, and structures.  The objective is to ensure that plant equipment is fit for new and/or continued service. This is applicable to all phases of fixed mechanical equipment design, procurement, fabrication, receipt and storage, installation, commissioning, operation, maintenance, and decommissioning.

Job Roles and Responsibilities: 

  • Perform all visual inspections, write reports and update PCMS
  • Analyze UT data in PCMS
  • Follow and PSSR all MOCs affecting the MI program.
  • Address process/operational questions, concerns, etc.
  • Maintain relief valve data
  • Initiate deferrals of all fixed equipment (if needed) and track to completion.
  • Remain in constant communication with operations, maintenance, and engineering.
  • Ensure all MI procedures are adhered to
  • Perform Temporary Repair Inspections
  • Inspect and stamp all bundles (new and old)
  • Develop and review ITP’s for upcoming turnarounds, shutdowns, cleanings, outages, projects, maintenance work, etc
  • Identify potential CUI areas and make recommendations as needed
  • Perform tank leg inspections
  • Perform ladder, handrail and platform inspections
  • Follow all fixed equipment jobs from start to completion. This includes maintenance work, capital projects, turnarounds, etc.
  • Ensure all final construction packages are correct and complete.
  • Spot check fabrication and material (MTRs). Ensure that material adheres to TPC Gem Specifications for the service. 
  • Review all x-rays performed and witness all pressure tests.
  • Review and approve WPS, PQR and WPQ
  • Verify proper insulation and painting have been completed.
  • Ensure code compliance
  • Read and follow P&IDs, Construction Drawings, Inspection Isometrics, and Civil Drawings without assistance
  • Capable of sketching piping isometrics
  • Experience in circuitizing piping systems
  • Develop and follow repair plans and scopes of work
  • Report out on KPIs

 Required Qualifications:

  • Holds API 510 and 570 for a minimum of 5 years.
  • Minimum 10 years inspection field experience in a chemical plant or refinery
  • Must be able to climb ladders
  • Cannot have acrophobia or claustrophobia (tower, vessel, boiler, tank)
  • Able to carry 50 pounds
  • Must have a valid TWIC Card or ability to acquire
  • Must have a valid Driver’s License to travel to both sites
  • Must be computer literate in Microsoft Word, Excel, Access, and Drawing TrueView
  • Must be knowledgeable with the following codes and practices NBIC, ASME B16.5, 1, B31.3, Sect I, II, V, VIII, IV, API 510, 520, 521, 560, 570, 571, 572, 574, 576, 577, 578, 579, 582, 583, 620, 650, 651, 653, 2000, 2201, 2218 and an understanding of various ASTM, NFPA and NACE standards
  • Must have a thorough working knowledge of DOT and Coast Guard Regulations
  • Must have at least 1 year experience in PCMS as an administrator
  • Must be literate in CMMS Oracle

Preferred Qualifications:

  • API 653
  • CWI or CAWI 
  • Level II or III PT, MT, UTT
  • Film Interpretation

Job Location:

  • Houston

Applicants must be authorized to work for any employer in the United States continually without company sponsorship.

Apply