ZipRecruiter

Log In

1

Boiler Inspector Jobs in Concord, NH (NOW HIRING)

Laars Heating Systems

QUALITY ENGINEER I

Rochester, NH · On-site

$70K - $91K/yr

Our focus is on new condensing boiler and heat pump water heater technology and the continued ... The QE will work to limit reliance on incoming and fabrication inspection by strengthening upstream ...

LAARS Heating Systems Co.

QUALITY ENGINEER I

Rochester, NH · On-site

$70 - $100/hr

Our focus is on new condensing boiler and heat pump water heater technology and the continued ... The QE will work to limit reliance on incoming and fabrication inspection by strengthening upstream ...

PrysmianGroup

Maintenance Mechanic

Manchester, NH · On-site

$25 - $31.75/hr

Inspect, repair, and maintain a variety of plant equipment including electric motors, engines, pumps, boilers, air compressors, emergency systems, power generation systems, chillers, cranes, and ...

Wheelabrator Technologies

Utility Operator

Concord, NH · On-site

Monitor and inspect various boiler plant auxiliary equipment including pumps, motors, fans, dampers, air compressors, valves, mixers, conveyors, and electrical devices * Accurately read and interpret ...

Wheelabrator Technologies

Utility Operator

Concord, NH · On-site

Monitor and inspect various boiler plant auxiliary equipment including pumps, motors, fans, dampers, air compressors, valves, mixers, conveyors, and electrical devices * Accurately read and interpret ...

WIN Waste Innovations

Utility Operator

NH · On-site

Monitor and inspect various boiler plant auxiliary equipment including pumps, motors, fans, dampers, air compressors, valves, mixers, conveyors, and electrical devices * Accurately read and interpret ...

UniFirst

Maintenance Technician I - UniFirst

Bow, NH · On-site

Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks ... Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in ...

next page

Showing results 1-20

All JobsBoiler Inspector JobsBoiler Inspector Jobs in Concord, NH

Boiler Inspector information

See Concord, NH salary details

$20

$29

$44

How much do boiler inspector jobs pay per hour?

As of Aug 26, 2026, the average hourly pay for boiler inspector in Concord, NH is $29.76, according to ZipRecruiter salary data. Most workers in this role earn between $25.14 and $31.68 per hour, depending on experience, location, and employer.

What is a boiler inspector?

Boiler Inspectors are professionals responsible for examining boilers, pressure vessels, and related equipment to ensure they are safe and compliant with regulations. They conduct routine inspections, evaluate the condition of equipment, and ensure that all safety codes and standards are met. Their work helps prevent accidents, equipment failures, and hazardous situations in buildings, industrial facilities, and power plants. Boiler Inspectors may also review installation procedures, test safety devices, and issue certifications for operation.

What does a boiler inspector do?

A pressure vessel or boiler inspector inspects pressurized systems. Their duties include reading gauges to ensure the equipment is running at the proper pressure, checking the vessel for any signs of wear or damage, and making minor repairs as necessary. The responsibilities of a boiler inspector also involve the maintenance of safety devices that monitor pressure continuously. Qualifications for this career vary but may include a bachelor’s degree in engineering. Depending on the type of system, technical training and professional certification may be sufficient.

What are the key skills and qualifications needed to thrive as a boiler inspector, and why are they important?

To thrive as a Boiler Inspector, you need a solid understanding of mechanical systems, engineering principles, and safety regulations, usually backed by a relevant technical degree or certification. Familiarity with inspection tools, non-destructive testing methods, and industry standards such as ASME codes is essential. Attention to detail, strong analytical thinking, and effective communication help inspectors identify hazards and clearly report findings. These skills ensure boilers operate safely and efficiently, preventing accidents and ensuring regulatory compliance.

What are some common challenges faced by boiler inspectors in the field?

Boiler Inspectors often encounter challenges such as accessing confined or hazardous spaces, staying updated with complex and evolving safety regulations, and effectively communicating findings to both technical and non-technical personnel. They must also manage tight inspection schedules while ensuring thoroughness and safety compliance. Adapting to various types of boilers and operating environments requires strong technical expertise and attention to detail.

What is the difference between Boiler Inspector vs Boiler Technician?

AspectBoiler InspectorBoiler Technician
CertificationsOften requires state or national inspector certificationsRequires technical certifications or licenses related to boiler operation and repair
Work EnvironmentPrimarily inspection sites, safety audits, regulatory complianceMaintenance, repair, and operation of boilers in industrial or commercial settings
Employer & IndustryRegulatory agencies, inspection firms, manufacturing plantsIndustrial facilities, power plants, HVAC companies

While both roles involve working with boilers, a Boiler Inspector focuses on safety inspections and compliance, whereas a Boiler Technician handles maintenance and repairs. Understanding these differences helps in choosing the right career path or job search focus.

More about Boiler Inspector jobs

What are popular job titles related to Boiler Inspector jobs in Concord, NH?

For Boiler Inspector jobs in Concord, NH, the most frequently searched job titles are:

What job categories do people searching Boiler Inspector jobs in Concord, NH look for?

The top searched job categories for Boiler Inspector jobs in Concord, NH are:

Boiler Inspector jobs near you
Infographic showing various Boiler Inspector job openings in Concord, NH as of August 2026, with employment types broken down into 92% Full Time, and 8% Temporary. Highlights an 92% In-person, and 8% Remote job distribution, with an average salary of $61,893 per year, or $29.8 per hour.

QUALITY ENGINEER I

Laars Heating Systems

Rochester, NH • On-site

$70K - $91K/yr

Full-time

Re-posted 13 days ago

Job description

Laars Heating Systems Company is a global leader in the boiler and water heater industry. Our products are designed and manufactured in the United States and we have earned a competitive advantage through our innovation and customer dedication. We have a talented team of Engineers, Designers, and Technicians, along with a new state-of-the-art R&D laboratory. Our focus is on new condensing boiler and heat pump water heater technology and the continued growth and success of our organization.
Laars Heating Systems is seeking a Quality Engineer 1 (QE1) who is responsible for driving measurable improvement in product quality and process performance across the boiler and water heater manufacturing operation. This role uses data analysis, sound engineering principles, and structured problem-solving methodologies (e.g., 8D, A3, DMAIC, Six Sigma) to identify and eliminate the root causes of quality issues at their source.
A central focus of this position is to maintain a proactive, prevention-based posture and culture as opposed to a reactive, inspection-dependent quality model. The QE will work to limit reliance on incoming and fabrication inspection by strengthening upstream process control, statistical process monitoring, and supplier capability - ensuring quality is built into the process rather than caught at the end of it.
This position serves as a primary point of responsibility for both customer-facing and supplier-facing quality matters, partnering closely with Manufacturing Engineering, Design Engineering, Production, Procurement, Service, suppliers, and external customers. The QE acts as a cross-functional connector - translating field issues, supplier nonconformances, and process variation into practical, sustainable corrective actions that reduce scrap, rework, and warranty costs while improving throughput, delivery reliability, and the overall customer experience.
Role Responsibilities
Quality Engineering & Process Improvement
  • Analyze quality, scrap, rework, and warranty data to identify trends, prioritize improvement opportunities, and quantify cost of poor quality (COPQ).
  • Lead and participate in root cause analysis and structured problem-solving (5-Why, Fishbone, 8D, A3) for internal nonconformances, field failures, and customer complaints.
  • Develop, implement, and maintain control plans, PFMEAs, and process control methods (SPC, gauge R&R, capability studies) to stabilize and improve manufacturing processes.
  • Partner with Manufacturing Engineering and Production teams to design and validate process improvements, error-proofing (poka-yoke), and inspection methods that prevent defects rather than detect them downstream.
  • Drive corrective and preventive action (CAPA) plans through to verified, sustained closure.

Incoming Inspection Reduction & Supplier Quality
  • Lead efforts to reduce reliance on incoming inspection by qualifying supplier processes, implementing source inspection or certified supplier programs, and validating supplier process capability.
  • Serve as the primary supplier quality contact: lead supplier corrective action requests (SCARs), supplier audits, and capability assessments.
  • Collaborate with Procurement to evaluate and develop supplier quality performance, including onboarding new suppliers and managing ongoing supplier scorecards.
  • Work with suppliers on PPAP/first article approval, process validation, and continuous improvement initiatives tied to incoming material quality.

Customer Quality
  • Act as the primary point of contact within the quality team for external customer quality concerns, field issues, and warranty trends, partnering with Service to investigate and resolve.
  • Translate field and warranty data into actionable internal improvement projects.
  • Support customer audits, quality documentation requests, and complaint resolution with timely, data-driven responses.
  • Communicate quality performance, corrective actions, and improvement plans clearly to both internal stakeholders and external customers.

Cross-Functional Collaboration
  • Work daily with Manufacturing Engineering, Design Engineering, Production teams, Procurement, and Service to align on quality priorities and resolve issues collaboratively.
  • Participate in new product introduction (NPI) and design change processes to ensure manufacturability and quality requirements are addressed early.
  • Support internal and external audits and maintain relevant quality documentation and records.
  • Work the quality inspectors to report on quality metrics (defect rates, scrap, rework, warranty, supplier performance) and present findings to leadership.

Success in this role will be measured by:
  • Reduction in COPQ (Scrap, Rework, Warranty) Month over Month
  • Reduction in incoming inspection activities through Supplier capability improvements
  • Closure rate and effectiveness of CAPA/SCAR (no repeat issues)
  • Internal defect rates/ First Pass Yield improvements

Experience and Qualifications
  • 3-7 years of experience in a quality engineering, manufacturing engineering, or supplier quality role, preferably within a manufacturing environment (HVAC, appliance, heavy equipment, or similar regulated/mechanical product industry strongly preferred).
  • Demonstrated experience applying structured root cause and problem-solving methodologies (8D, A3, 5-Why, DMAIC, Six Sigma).
  • Working knowledge of statistical process control (SPC), measurement systems analysis (gauge R&R), and process capability studies (Cpk/Ppk).
  • Experience with supplier quality management, including supplier audits, SCARs, and PPAP or first article inspection processes.
  • Familiarity with FMEA development and control plan creation.
  • Experience working with ISO 9001 (or similar) quality management systems; experience with ASME, UL, or other boiler/water heater industry codes and standards is a plus.
  • Strong data analysis skills, including comfort working in Excel and/or quality/statistical software (Minitab or equivalent).
  • Excellent cross-functional communication skills, with the ability to work effectively with engineers, production personnel, suppliers, and customers.
  • Demonstrated ability to manage multiple priorities and drive corrective actions to closure independently.

Education and Training
  • Bachelor's degree in engineering (Quality, Mechanical, Industrial, Manufacturing, or related field) required; equivalent combination of education and relevant experience may be considered.
  • Six Sigma Green Belt or Black Belt certification preferred.
  • ASQ Certified Quality Engineer (CQE) or Certified Supplier Quality Professional (CSQP) preferred, or willingness to obtain.
  • Training or certification in core quality tools (FMEA, SPC, MSA, APQP/PPAP) preferred.

Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws.
For further information, please review the Know Your Rights notice from the Department of Labor.

Apply