1

Apprentice Small Engine Mechanic Jobs in Meridian, ID

Operating Engineer

Boise, ID

$66K - $89K/yr

... mechanical, electrical and plumbing equipment and systems for the assigned property(s ... • Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps ...

... small boat handling skills, and calm performance under pressure; strong team culture with high ... United States citizenship and eligibility for a security clearance; mechanical aptitude and solid ...

... small boat handling skills, and calm performance under pressure; strong team culture with high ... United States citizenship and eligibility for a security clearance; mechanical aptitude and solid ...

... small boat handling skills, and calm performance under pressure; strong team culture with high ... United States citizenship and eligibility for a security clearance; mechanical aptitude and solid ...

... small boat on foreign shores; majority of time spent in the field conducting high risk, time ... mechanical comprehension, and electronics information; age typically 30 or younger at accession;

... small boat on foreign shores; majority of time spent in the field conducting high risk, time ... mechanical comprehension, and electronics information; age typically 30 or younger at accession;

... small boat on foreign shores; majority of time spent in the field conducting high risk, time ... mechanical comprehension, and electronics information; age typically 30 or younger at accession;

Field Service Electrician

Caldwell, ID · On-site

$23 - $30/hr

Minimum 1000 hrs electrical apprentice; Electrical Certification preferred. * Minimum 2 years of ... Strong mechanical aptitude to perform basic field repairs outside of electrical needs.

Uses hand tools and small power tools. * Assists senior technicians with inspecting and testing ... Demonstrates strong mechanical aptitude. * Shows excellent attendance and punctuality. * Works ...

... mechanical systems when they fail. In this position you will work directly with senior level ... Basic understanding of small engines * Basic ability in construction / carpentry * Basic ability in ...

... mechanical systems when they fail. In this position you will work directly with senior level ... Basic understanding of small engines * Basic ability in construction / carpentry * Basic ability in ...

Showing results 21-33

Apprentice Small Engine Mechanic information

See Meridian, ID salary details

$11

$21

$36

How much do apprentice small engine mechanic jobs pay per hour?

As of Aug 6, 2026, the average hourly pay for apprentice small engine mechanic in Meridian, ID is $21.35, according to ZipRecruiter salary data. Most workers in this role earn between $16.78 and $23.32 per hour, depending on experience, location, and employer.

What is an apprentice small engine mechanic?

An Apprentice Small Engine Mechanic assists experienced mechanics in inspecting, maintaining, and repairing small engines, such as those in lawnmowers, chainsaws, and motorcycles. The apprentice learns to diagnose issues, replace faulty parts, and perform routine maintenance under supervision. This role provides hands-on training and technical knowledge to prepare for a full mechanic position. It often involves working in repair shops, outdoor settings, or dealerships while following safety protocols.

What are the key skills and qualifications needed to thrive as an apprentice small engine mechanic?

To thrive as an Apprentice Small Engine Mechanic, you need basic mechanical aptitude, problem-solving abilities, and often a high school diploma or equivalent. Familiarity with hand and power tools, diagnostic equipment, and adherence to safety standards are typically expected; some employers may also require completion of a vocational program or relevant certification. Strong work ethic, attention to detail, and willingness to learn from experienced technicians help set apprentices apart. These skills and qualities ensure accurate repairs, a smooth learning process, and effective teamwork in a hands-on technical environment.

What kind of career advancement opportunities are available for apprentice small engine mechanics?

Apprentice Small Engine Mechanics have excellent opportunities to grow within the industry as they gain hands-on experience and expand their technical knowledge. Many start by working under the supervision of experienced mechanics and gradually take on more complex repair and diagnostic tasks. With further training, certification, and proven skills, apprentices can advance to positions such as Small Engine Mechanic, Lead Technician, or Shop Supervisor. In addition, some go on to specialize in certain equipment types or pursue business ownership. Employers often support apprentices' growth by providing access to ongoing training and manufacturer-specific courses.

What are popular job titles related to Apprentice Small Engine Mechanic jobs in Meridian, ID? For Apprentice Small Engine Mechanic jobs in Meridian, ID, the most frequently searched job titles are:
What job categories do people searching Apprentice Small Engine Mechanic jobs in Meridian, ID look for? The top searched job categories for Apprentice Small Engine Mechanic jobs in Meridian, ID are:
What cities near Meridian, ID are hiring for Apprentice Small Engine Mechanic jobs? Cities near Meridian, ID with the most Apprentice Small Engine Mechanic job openings:
Infographic showing various Apprentice Small Engine Mechanic job openings in Meridian, ID as of August 2026, with employment types broken down into 92% Full Time, and 8% Part Time. Highlights an 100% In-person job distribution, with an average salary of $44,405 per year, or $21.3 per hour.

$66K - $89K/yr

Full-time

Re-posted 5 days ago


Cushman & Wakefield rating

7.4

Company rating: 7.4 out of 10

Based on 158 frontline employees who took The Breakroom Quiz

110th of 201 rated real estate companies


Job description

Job Title

Operating Engineer

Job Description Summary

Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties.

Job Description

ESSENTIAL FUNCTIONS AND RESPONSIBILITIES:
• Perform all plumbing, electrical, or HVAC requirements of the building(s)
• Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.
• Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings
• Verify field conditions and perform any necessary repairs or adjustments
• Monitor Energy Management
• Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property
• Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)
• Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.
• Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris
• Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management
• Document and report activities to supervisor
• Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns
• Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits
• Complete all required C&W Safety Training as scheduled annually
• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours
KEY COMPETENCIES:
• Technical Proficiency
• Initiative
• Flexibility
• Multi-Tasking
• Sense of Urgency
IMPORTANT EDUCATION:
• High School Diploma of GED Equivalent
• Graduate of apprentice program or trade school preferred
IMPORTANT EXPERIENCE:
• 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting
ADDITIONAL ELIGIBILITY QUALIFICATIONS:
• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)
• May be required to have certification as a Universal Technician for CFC’s depending on market licensure requirements
• Possess and maintain a valid driver’s license and good driving record with periodic checks (where applicable)
• Basic Computing Skills in Outlook, Excel & Word
• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.
• Knowledgeable in energy management systems, techniques and operations.
• Thorough knowledge in all building systems operations, maintenance and repair.
May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call duties
WORK ENVIRONMENT
This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
• Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices
• Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine
• Involves movement between departments, floors, and properties to facilitate work
• Ability to speak clearly so others can understand you
• Ability to read and understand information presented orally and in writing
• Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematics
 


Cushman & Wakefield provides equal employment opportunity. Discrimination of any type will not be tolerated. Cushman & Wakefield is an Equal Opportunity / Affirmative​ Action employer. All qualified applicants will receive consideration for employment without  regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other characteristic protected by state, federal, or local law.

In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email HRServices@cushwake.com. Please refer to the job title and job location when you contact us.

INCO: “Cushman & Wakefield”

What Cushman & Wakefield employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom