ZipRecruiter

Log In

1

6G Welding Jobs (NOW HIRING)

D-Skilled Staffing

Be Seen First

Welder

Alvarado, TX · On-site

$18 - $24/hr

... 6G Welding • MIG (GMAW) • Flux Core (FCAW) • Stick (SMAW) • TIG (GTAW) as needed ✅ Requirements: • Industrial welding and fabrication experience • Ability to read blueprints • ...

Thermogenics LLC

Welder

Las Vegas, NV · On-site

$18.75 - $24.50/hr

Key Responsibilities: • Perform advanced welding techniques, especially in 6G welding positions, ensuring high-quality, precise welds. • Assemble, repair, and maintain boilers and pressure ...

PROMAN Skilled Trades

Be Seen First

Welder

Waxahachie, TX · On-site

$30 - $36/hr

Work Scope: * 6G welding * 2-inch stainless steel and carbon steel pipe * 100% X-ray welds * Carbon steel welding performed while working from the top of a boom lift * Industrial/commercial ...

MCCORVEY COMPANIES

6G Welder

Grapevine, TX · On-site

$24 - $29.50/hr

Performs pipe welding primarily in a 1G position. Must pass a test in 6G position. Responsibilities: * Layout and fit pipe, offsets, bends, and radiuses. Assemble and install hangers, pipes, and ...

Trinity Employment Specialists

Pipe Welder

Tulsa, OK · On-site

$30 - $34/hr

Complete the following welding tests: * 2-inch Extra Heavy GTAW (Gas Tungsten Arc Welding). * 6G welding test for all processes. * 6-inch Flux Core fill and cap . * Follow blueprint specifications to ...

The ProHunters

Journeyman Pipe Welder

Terrell, TX · Remote

$28 - $36/hr

... 6G welding cert even better, but no certification is also fine as we will have you test prior to starting. $45.00 daily per diem if you are 60+ miles from project Looking for welders to start ASAP!

Lancesoft

Fabricator - 6G Welder

Charlotte, NC · On-site

$28 - $30/hr

... welding using Pulsed MIG, Short-arc MIG or Submerged arc processes;ASME certification • Ability to lift 50 pounds • Physical ability to work and weld in awkward positions such as kneeling, lying ...

Stand-By Personnel

Fitter Welder

Broken Arrow, OK

$27 - $28/hr

Candidates must pass a 6G MIG and Flux Core welding test on a 2" pipe. We are seeking a highly skilled 6G Pipe Welder with extensive experience in spool welding to join our team in Broken Arrow, OK.

MCCORVEY COMPANIES

Night Shift Pipe Welder

Houston, TX · On-site

$24.75 - $30.50/hr

Perform pipe welding primarily in the 1G position and successfully pass a 6G welding test . * Lay out, fit, and weld pipe, including offsets, bends, and radiuses. * Assemble and install hangers, pipe ...

Hardy

Pipe Welder

Huntsville, AL · On-site

$23/hr

This role requires proficiency in 6G welding positions using stick welding (SMAW) techniques and experience working on Redstone Arsenal or other secure government facilities. The Welder must ensure ...

Hardy Corp

Pipe Welder

Huntsville, AL · On-site

This role requires proficiency in 6G welding positions using stick welding (SMAW) techniques and experience working on Redstone Arsenal or other secure government facilities. The Welder must ensure ...

Apply Early

Hardy Corp

Pipe Welder

Huntsville, AL · On-site

$23/hr

Welding & Fabrication • Perform 6G position welding on carbon steel materials using SMAW (stick welding) processes. • Read and interpret weld maps, blueprints, and specifications. • Help ...

next page

Showing results 1-20

All Jobs6G Welding Jobs

6G Welding information

See salary details

$14

$29

$45

How much do 6g welding jobs pay per hour?

As of Jul 3, 2026, the average hourly pay for 6g welding in the United States is $29.79, according to ZipRecruiter salary data. Most workers in this role earn between $23.32 and $34.13 per hour, depending on experience, location, and employer.

What are some common challenges faced by 6G Welders on the job?

6G Welders often work in demanding environments where they must weld pipes in fixed, difficult positions, which can require extended periods of standing, bending, and maneuvering tools in tight spaces. Maintaining consistent weld quality despite awkward angles, heat, and confined workspaces can be challenging and requires both technical expertise and physical stamina. Additionally, meeting strict safety and quality standards is crucial, as 6G welds are often used in critical infrastructure such as pipelines and power plants. Team collaboration is also important, as welders must frequently coordinate with inspectors, engineers, and other tradespeople to ensure successful project completion.

Can you make $100,000 as a welder?

6G welding is a highly skilled specialization that can lead to higher salaries, especially with experience, certifications, and working in high-demand industries like aerospace or oil and gas. Welders in such roles can potentially earn $100,000 or more annually, particularly with overtime and advanced skills. However, typical wages vary based on location, experience, and industry, and reaching this level often requires significant expertise and certification.

What is a 6G Welding job?

A 6G welding job involves working with pipe welding in a fixed 45-degree position, where the pipe cannot be moved. This is considered one of the most challenging welding positions because it requires welding in multiple positions—horizontal, vertical, and overhead. Welders in this role must be highly skilled in different welding techniques, such as TIG, MIG, or stick welding. 6G-certified welders are in high demand in industries like construction, oil and gas, and manufacturing due to their expertise in creating strong, precise welds on pipelines and structural components.

What is a 6G position in welding?

A 6G position in welding refers to a fixed, vertical, and overhead pipe welding position where the pipe is placed at a 45-degree angle, and the welder must work from all sides without moving the pipe. It is considered one of the most challenging positions and often required for certification, demanding advanced skills and proper safety precautions. Mastery of the 6G position can lead to higher-paying welding jobs and increased job opportunities.

Can you make $300,000 as a welder?

6G welding is a highly skilled specialization that can lead to high earnings, especially for experienced welders working in industries like oil and gas, aerospace, or construction. Top earners with advanced certifications, extensive experience, and the ability to work overtime or in remote locations can potentially reach or exceed $300,000 annually. However, such salaries are typically achieved after many years of experience and in demanding environments.

How much does a 6G welder make?

A 6G welder typically earns between $20 and $40 per hour, with annual salaries ranging from approximately $40,000 to $80,000 depending on experience, certifications, and location. Skilled welders with certifications like AWS or ASME and experience in pipe welding tend to earn higher wages, especially in industrial or construction environments.

What are the key skills and qualifications needed to thrive in the 6G Welding position, and why are they important?

To excel in 6G Welding, you need advanced welding techniques, strong hand-eye coordination, and a thorough understanding of welding codes and blueprints, typically backed by certification (such as AWS or ASME). Mastery of tools like TIG, MIG, and stick welders, along with experience using pipe alignment and inspection equipment, is essential. Attention to detail, problem-solving abilities, and a commitment to safety are standout soft skills in this field. These skills ensure high-quality welds in complex pipe positions, promote safety, and support efficiency in demanding industrial settings.

More about 6G Welding jobs
What cities are hiring for 6G Welding jobs? Cities with the most 6G Welding job openings:
What states have the most 6G Welding jobs? States with the most job openings for 6G Welding jobs include:
What job categories do people searching 6G Welding jobs look for? The top searched job categories for 6G Welding jobs are:
6G Welding jobs near you
Pipe Welders - 6G Certified

Pipe Welders - 6G Certified

QLM, Skilled Staffing Solutions

Phoenix, AZ

$25 - $40/hr

Full-time

Medical, Dental, Vision, Retirement

Posted 3 days ago

Job description

QLM is looking for a skilled, certified 6G Welder to cut and join metals and other materials at our facilities or construction sites in Phoenix and Casa Grande. You will operate appropriate equipment to put together mechanical structures or parts with a great deal of precision. Your job is important as it provides the foundation for strong infrastructure. HIRING BONUS of $100, after 3 weeks of work!!A welder must be competent in using potentially dangerous equipment following all safety precautions. The ideal candidate will also have a steady hand and great attention to detail. Knowledge of different kinds of metal and their properties is essential.

Responsibilities

  • Read blueprints and drawings and take or read measurements to plan layout and procedures
  • Determine the appropriate welding equipment or method based on requirements
  • Set up components for welding according to specifications (e.g. cut material with powered saws to match measurements)
  • Operate angle grinders to prepare the parts that must be welded
  • Align components using calipers, rulers etc. and clamp pieces
  • Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead)
  • Repair machinery and other components by welding pieces and filling gaps
  • Test and inspect welded surfaces and structure to discover flaws
  • Maintain equipment in a condition that does not compromise safety





Requirements and skills

  • Must have a valid 6G Welding Certification
  • Experience using a variety of welding equipment and procedures (TIG, MMA etc.)
  • Experience in using electrical or manual tools (saws, squares, calipers etc.)
  • Ability to read and interpret technical documents and drawings
  • Knowledge of relative safety standards and willingness to use protective clothing (face-shield, gloves etc.)
  • Deftness and attention to detail
  • Proficient in English
  • Successful completion of a relevant apprenticeship program is required
  • Professional Certification 6G is a must

Quality Labor Management (QLM) provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, transgender status or sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state, and local laws. The Company complies with applicable Federal state and local laws governing nondiscrimination in employment in every location in which the company has facilities.