ZipRecruiter

Log In

1

Work Study Pipe Threading Jobs in Richardson, TX

Cleaver-Brooks

Boilermaker/Pipefitter/Combo Welder

Dallas, TX · On-site

$23.50 - $28.75/hr

May thread and install pipe, using pipe wrench and dies. * May remove and replace insulation and ... Work within precise limits or standards of accuracy; make decisions based on measurable criteria ...

PROMAN Skilled Trades

Be Seen First

journeyman pipefitter

Lancaster, TX · On-site

$30 - $38/hr

Cut, thread, and fit pipes and tubing * Inspect and test installed systems for leaks and defects ... Document work progress and report any issues promptly

Lawton Group

Licensed Service Plumber

Carrollton, TX · On-site

$32 - $37/hr

... threading machines, or pipe-bending machines. * Review blueprints, building codes, or specifications to determine work details or procedures. * Estimate time, material, or labor costs for use in ...

Lawton Group

Licensed Service Plumber

Carrollton, TX · On-site

$32 - $37/hr

... threading machines, or pipe-bending machines. * Review blueprints, building codes, or specifications to determine work details or procedures. * Estimate time, material, or labor costs for use in ...

Catapult Solutions Group

Pipefitter

Fort Worth, TX · On-site

$38/hr

You'll be working on complex, high-performing mechanical systems where the quality of your work ... Join piping using threaded, soldered, brazed, fused, or cemented joints as required by ...

RPC Company

Be Seen First

Pipefitter

Carrollton, TX · On-site

$30/hr

Measure, cut, thread, groove, and fit pipe according to project requirements. * Install valves, pumps, supports, and related mechanical equipment. * Ensure all work meets project specifications ...

Catapult Solutions Group

Pipefitters - Dallas

Royse City, TX · On-site

$23.25 - $29.75/hr

Experience with pipe layout, takeoffs, and installation techniques * Knowledge of piping systems, materials, and tools * Ability to work with various fitting methods (threaded, grooved, welded)

Blue Star Mechanical

Journeyman

Dallas, TX · On-site

$80K - $120K/hr

We work alongside our clients to make the estimating, preconstruction, and project management ... Use hand tools, pipe threading machines, and other equipment to complete plumbing projects.

PROMAN Skilled Trades

Be Seen First

Pipefitters - Journeymen/Apprentices

Fort Worth, TX · On-site

$25 - $38/hr

Measure, cut, thread, groove, and assemble pipe systems. * Install, modify, and repair commercial ... Ability to work independently and as part of a team. * Reliable transportation and strong work ...

previous pagenext page

Showing results 21-40

All JobsWork Study Pipe Threading JobsWork Study Pipe Threading Jobs in Richardson, TX

Work Study Pipe Threading information

See Richardson, TX salary details

$14

$22

$43

How much do work study pipe threading jobs pay per hour?

As of Aug 24, 2026, the average hourly pay for work study pipe threading in Richardson, TX is $22.47, according to ZipRecruiter salary data. Most workers in this role earn between $17.45 and $22.69 per hour, depending on experience, location, and employer.

What is the difference between Work Study Pipe Threading vs Pipe Fitter?

AspectWork Study Pipe ThreadingPipe Fitter
CertificationsBasic pipe threading and safety certificationsAdditional certifications like welding or advanced pipe fitting
Work EnvironmentManufacturing plants, construction sites, industrial facilitiesConstruction sites, industrial plants, maintenance facilities
Job FocusOperating pipe threading machines, preparing pipes for installationAssembling, installing, and repairing piping systems
Employer & Industry UsageManufacturing, construction, plumbing industryConstruction, industrial maintenance, plumbing services

Work Study Pipe Threading primarily involves operating machines to cut threads on pipes, focusing on preparation and precision. Pipe Fitters, however, are responsible for installing and maintaining piping systems. While both roles work in similar environments and require safety certifications, Pipe Fitters have a broader scope involving assembly and repair, whereas Work Study Pipe Threading is more specialized in pipe preparation.

What are popular job titles related to Work Study Pipe Threading jobs in Richardson, TX?

For Work Study Pipe Threading jobs in Richardson, TX, the most frequently searched job titles are:

What job categories do people searching Work Study Pipe Threading jobs in Richardson, TX look for?

The top searched job categories for Work Study Pipe Threading jobs in Richardson, TX are:

What cities near Richardson, TX are hiring for Work Study Pipe Threading jobs?

Cities near Richardson, TX with the most Work Study Pipe Threading job openings:

Work Study Pipe Threading jobs near you
Infographic showing various Work Study Pipe Threading job openings in Richardson, TX as of August 2026, with employment types broken down into 70% Full Time, and 30% Part Time. Highlights an 100% In-person job distribution, with an average salary of $46,735 per year, or $22.5 per hour.

Boilermaker/Pipefitter/Combo Welder

Cleaver-Brooks, Inc.

Dallas, TX • On-site

$23.50 - $28.75/hr

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Posted 6 days ago

Cleaver-Brooks rating

6.3

Company rating: 6.3 out of 10

Based on 10 frontline employees who took The Breakroom Quiz

Job description

Cleaver-Brooks Sales and Service is looking for a Boilermaker/Pipefitter/Combo Welder to join our team in Dallas, TX. The Boilermaker/Pipefitter/Combo Welder is responsible traveling daily to customer sites to assemble boilers, tanks, vats, and pressure vessels according to blueprint specifications, using power tools and hand tools.
Any salary estimation specified in this job board may or may not be aligned with our organization's pay philosophy. Apply to connect with a Talent Acquisition Partner who can provide you more details!
Job Location: Dallas, TX
Essential functions:
Boilermaker:
  • Assembles boilers, tanks, vats, and pressure vessels according to blueprint specifications, using power tools and hand tools

  • Reads blueprint to determine location and relationship of parts.

  • Connects fire tubes to heads or water tubes to drums and headers of boilers, by expanding and belling ends, using tube expander and beading ends, using power hammer.

  • Drills and taps holes for installation of studs, using portable drill.

  • Tightens bolts to assemble frames, using hand or power wrenches.

  • Mounts casings of water tube boilers, or attaches davit heads, burners, or furnace casing to fire tube boilers, using wrenches.

  • Bolts or screws accessories, such as man-holes, hand-holes, fans, gauges, and valves to vessel, using hand tools or power wrenches.

  • Replaces defective parts or piping, using power wrenches, prying bars, or hand tools.

  • May install and repair refractory brick or furnace tile.

  • May thread and install pipe, using pipe wrench and dies.

  • May remove and replace insulation and caulk seams to repair insulation on shells, piping, boiler fire-sides or structures.

  • May cut out defective parts, boiler tubes or tube ends using acetylene torch.

Pipefitter:
  • Piping Lay out, fabricates, assembles, installs, and maintains piping and piping systems, fixtures, and equipment for boiler systems by threading or by sweating copper pipe or pro-press fittings.

  • Selects type and size of pipe and related materials according to job specifications.

  • Inspects worksites to determine presence of obstructions and to ascertain that piping integrity will not cause structural weakness.

  • Plans sequence of installation to avoid obstructions and activities of other construction workers.

  • Cuts pipe, using hacksaw, pipe cutters, hammer and chisel, cutting torch, and pipe cutting machine.

  • Threads pipe, using threading machine.

  • Bends pipe by hand or with pipe-bending machine.

  • Assembles and installs variety of metal pipe and pipe-fittings.

  • Secures pipes to structure with clamps, brackets, and hangers, using hand tools.

  • Tests piping system for leaks by increasing pressure in pipes and observing gauges attached to pipes for indication of leaks.

  • May weld holding fixtures to structural steel members.

Combo Welder:
  • Combo or Pipe Welders must be experienced in boiler fabrication, retubing, pipe fitting and welding.

  • Must pass company's weld test, using SMAW process, in 6G position on a 2" schedule 180 pipe (5/8 " thick), with a 6010 root pass and a 7018 filler and cap.

  • ASME code: Mig, Tig & Stick.

  • Must have recent pipe and/or tube welding experience.

Basic Requirements:
Education:
  • A High School diploma or equivalent is mandatory.

Experience:
  • Workers should be able to: Work within precise limits or standards of accuracy; make decisions based on measurable criteria; and visualize objects in three-dimensions from plans and drawings.

  • Must be able to pass a 6G weld test, including super coupon.

  • Physically, workers must be able to: Work easily and skillfully with hands; lift and carry objects weighing up to 50 pounds; see well (either naturally or with correction); climb and maintain balance on high ladders and scaffolds; and stand, stoop, kneel, or crouch.

  • Must have a valid current driver's license with a clean driving record.

Other experience:
  • Workers should be able to: Work within precise limits or standards of accuracy; make decisions based on measurable criteria; and visualize objects in three-dimensions from plans and drawings.

  • Must be able to pass a 6G weld test, including super coupon.

  • Physically, workers must be able to: Work easily and skillfully with hands; lift and carry objects weighing up to 50 pounds; see well (either naturally or with correction); climb and maintain balance on high ladders and scaffolds; and stand, stoop, kneel, or crouch.

  • Must have a valid current driver's license.

Physical Skill & Effort:
Work easily and skillfully with hands; lift and carry objects weighing up to 50 pounds; see well (either naturally or with correction); climb and maintain balance on high ladders and scaffolds; and stand, stoop, kneel, or crouch. Pass screening for vision and hearing.
Working Conditions and Hazards:
Knowledge of Industrial & commercial safety, General Basic plus Safety, LOTO, working overhead, confined space entry, basic electricity safety.
Benefits of being a Cleaver-Brooks Sales & Service Employee:
  • Competitive salary

  • Comprehensive benefits, including medical, dental, vision, maternity support program, discounted virtual physician visits, voluntary medical benefits (Critical Illness, Hospital Care, and Accidental Injury), FSA, HSA, life insurance, short term and long-term disability

  • Cash matching 401(k) plan

  • Employee assistance program (EAP)

  • Pet insurance

  • Employee discount program

  • Tuition assistance

  • Paid time off and 11 paid holidays

Who is Cleaver-Brooks Sales & Service:
Cleaver-Brooks Sales and Service, Inc. (CBSS) is a market leader in providing fully integrated boiler and burner systems. CBSS offers a full range of capabilities from: new equipment, installation, rentals, retrofits, repairs, parts, and service. We can deliver, install, and upgrade boiler room solutions that improve efficiency, reduce cost, and optimize space. CBSS delivers the most efficient, reliable, safe, and environmentally sustainable solutions that differentiate us in the marketplace. We are a 24/7 customer driven operation.
This description indicates the general nature of the tasks and responsibilities required of positions given this classification. It is not intended as a complete list of specific duties and responsibilities. Nor is it intended to limit or modify the right of management to assign, direct, and control the specific duties of individuals performing this function. The Company reserves the right to change, modify, amend, add to or delete from any section of this document as it deems, in its judgement, to be proper.
Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws.
For further information, please review the Know Your Rights notice from the Department of Labor.

What Cleaver-Brooks employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply