ZipRecruiter

Log In

1

Weekend Slitting Machine Operator Jobs in Colorado

Gotham Greens

Packhouse Operator

Windsor, CO · On-site

$16.50 - $17/hr

In addition to the specific Machine Operator duties, the individual may also have PH PA duties ... Open availability to work various work schedules including holidays and weekends * Must be able to ...

Gotham Greens

Packhouse Operator

Windsor, CO · On-site

$16.50 - $17/hr

In addition to the specific Machine Operator duties, the individual may also have PH PA duties ... Open availability to work various work schedules including holidays and weekends * Must be able to ...

pca

Machine Helper

Denver, CO

$16.50 - $20.50/hr

Maximize the utilization of equipment by operating the machinery at available capacity and speed ... Ability and willingness to work overtime on short notice, both during the week and weekends.

VESTIS

Part Time Load Builder Operator

Denver, CO · On-site

$19.29/hr

Shift Hours: 1:30pm-6pm, M-F, no weekends Overview Performs work as part of a team in an industrial laundry facility. Responsible for the safe, expeditious, and accurate handling of merchandise into ...

Vestis

Part Time Load Builder Operator

Denver, CO · On-site

$19.29/hr

Shift Hours: 1:30pm-6pm, M-F, no weekends Overview Performs work as part of a team in an industrial laundry facility. Responsible for the safe, expeditious, and accurate handling of merchandise into ...

Dessert Holdings Inc.

Operator I - 1st Shift

Aurora, CO · On-site

$17.53/hr

This position is responsible for the safe operations of different baking machinery and is required ... Must be willing to work overtime, including weekends if necessary. * Must be able to read and write ...

Industrial Talent Group

Machine Shop Lead

Longmont, CO · On-site

... Weekend Shift operations. This is an excellent opportunity for a highly skilled CNC machinist ... operating CNC mills, troubleshooting production issues, and leading a team to meet quality and ...

NOVA Automation

Bandsaw Operator

Denver, CO · On-site

$19 - $25/hr

... and machinery. * May require working overtime or weekends depending on production needs. *All ... operating NOVA equipment in their production environments. The Service team, based in Denver, CO is ...

NOVA Automation

Bandsaw Operator

Denver, CO · On-site

$19 - $25/hr

... and machinery. * May require working overtime or weekends depending on production needs. *All ... operating NOVA equipment in their production environments. The Service team, based in Denver, CO is ...

Metron Machining

CNC Milling Machinist II/III

Denver, CO · On-site

$40/hr

First, second, or weekend shift Schedule: Four-day or three-day workweek Machines: CNC mills • ... This is not an operator-level position. Metron is looking for an experienced CNC milling machinist ...

Direct Edge

Large Format Cut Operator

Denver, CO · On-site

$20 - $24/hr

... machine efficiencies & speed to ensure production levels meet or exceed standards & make ... work overtime and weekends when needed Qualifications - Education, Experience, License ...

Direct Edge

Large Format Cut Operator

Denver, CO · On-site

... machine efficiencies & speed to ensure production levels meet or exceed standards & make ... work overtime and weekends when needed Qualifications - Education, Experience, License ...

previous page

Showing results 41-60

All JobsSlitting Machine Operator JobsWeekend Slitting Machine Operator JobsWeekend Slitting Machine Operator Jobs in Colorado

Weekend Slitting Machine Operator information

What cities in Colorado are hiring for Weekend Slitting Machine Operator jobs?

Cities in Colorado with the most Weekend Slitting Machine Operator job openings:

Weekend Slitting Machine Operator jobs near you

Machine Operator Day shift

DRAKE-WILLIAMS STEEL INC

Aurora, CO • On-site

$24 - $30/hr

Full-time

Posted 2 days ago

New

Job description

$5,000 Hiring Bonus!
Primary Purpose of this Position:
Fabricate parts for structural fabrication, Service Center, and misc. steel assemblies per cutting lists, shop drawings, and DWS quality requirements.
Essential Job Functions:
  1. Identify steel shapes, sizes, and mill tolerances.
  2. Fabricate material as trained and instructed.
  3. Fabricate beams, tubes, angle, channel, bar grating, pipe, plate, or rounds according to the dimensions shown on cut lists and shop drawings, AISC code requirements for structural steel, and machine capabilities.
  4. Make adjustments to machine to ensure accurate dimensions as shown on the shop drawings.
  5. Identify cut list and shop drawing errors and discrepancies before or during early stages of fabrication.
  6. Operate forklifts, jib cranes, overhead cranes, conveyors, and transfers in order to move materials.
  7. Any other duties assigned by management.
  8. Attend all meetings as required by management.
  9. Consistently and reliably works scheduled hours at assigned locations.

Knowledge, Skills and Abilities:
  1. Ability to read, write, and perform higher arithmetic computations involving addition, subtraction, multiplication, and division of whole numbers, decimals and fractions.
  2. Ability to understand and carry out semi-complicated verbal and written instructions.
  3. Ability to effectively communicate with co-workers, supervisors and managers.
  4. Ability to work under periodic supervision focused on the progress of work and setting priorities for job completion.
  5. Skill in using auto measurer, tape measure, or 1 rule.
  6. Ability to pass a Drake-Williams Steel administered test that covers shop drawing interpretation, fractional number calculations, basic geometry, etc.
  7. Ability to interpret, understand and utilize cutting lists, shop orders, and shop drawings.
  8. Ability to use a computer for cut-lists and inventory purposes.
  9. Ability to possess pride in own workmanship; demonstrate attention to detail, and work safely.
  10. Ability to operate forklifts and overhead cranes in a safe and proper manner. Use and understand industry and Drake-Williams Steel adopted hand signals used for crane operations.
  11. Perform minor mechanical tasks on machine (blade changes, cleaning, etc.)
  12. Ability to follow inventory procedures.
  13. Ability to multi-task.

  1. Physical Demands:
  2. Stand FREQUENTLY over the course of the 8 to 12 hour work shift.
  3. Walk OCCASIONALLY to FREQUENTLY over the course of the 8 to 12 hour work shift. The distances walked will range from a distance of a few feet to 60 foot.
  4. Sit only during the break and lunch periods. Rarely one will be able to sit while cutting material.
  5. Lift weights up to 20 pounds from floor to chest CONTINUOUSLY, which includes the various tools utilized in the process of performing the usual work duties.
  6. Lift weights up to 35 pounds from floor to waist FREQUENTLY during the 8 to 12 hour work shift
  7. Lift weights up to 60 pounds from floor to waist OCCASIONALLY during the work shift. Jib cranes and overhead cranes are available for the employees assistance with lifting.
  8. Carry weights noted above distances ranging from a few feet to 60 foot.
  9. Climb OCCASIONALLY onto or over the conveyors.
  10. Stoop or crouch OCCASIONALLY while performing the regular job duties. The position will be held continuously for a few seconds to 15 minutes, depending upon the job.
  11. Kneel in the commission of job duties OCCASIONALLY, depending upon the job.
  12. Crawl RARELY up to 10 feet to access tools, materials, etc.
  13. Reach forward OCCASIONALLY to perform job duties or to retrieve tools. The employee will OCCASIONALLY be required to reach to full forward extension.
  14. Reach overhead OCCASIONALLY to guide material attached to the cranes and to attach the chains from the crane to the material.
  15. Push and pull drawers open OCCASIONALLY to FREQUENTLY to retrieve tools. Employee will OCCASIONALLY push material attached to a jib crane or overhead crane to properly guide into place. Force varies up to 35 pounds.
  16. Push material OCCASIONALLY into machine for fabrication. (SHEAR)
  17. Gross finger dexterity skills required to operate the various tools and equipment utilized in the course of standard job duties. Fine finger dexterity is not required.

Non-Material Handling Demands
  • Employee is expected to work 40 hours a week. However, hours including overtime and weekends may be required based on Drake-Williams Steels needs.
  • Hear sufficiently to be aware of safety issues
  • Visual ability to read and interpret shop drawings. Safety glasses are required in the shop area.
  • Exposure to heat, cold, wet and humid conditions in the shop area OCCASIONALLY.
  • Exposure to fumes, odors and dusts in the shop area OCCASIONALLY.
  • Exposure to solvents, greases, oils, and coolants OCCASIONALLY.
  • Wear all required Personal Protective Equipment. PPE includes steel-toe safety shoes, hearing protection, safety glasses, gloves, and hard hats.

Tools Required:
Pencil, Square, Tape Measure, Markers, Ball Peen Hammer, Wire Brushes, 4 Grinder, SledgeHammer, Grab Hooks, Vise Grips, Allen Wrenches, Pry-Bar, C-Clamps, Band Cutters, and Chains.
Machines Utilized:
Saw, Overhead Crane, Jib Crane, Pallets, Transfers, Brake, Blaster, Punch, Shear, and Forklifts.
Experience and Education Required:
  • Minimum of six months of experience in a steel manufacturing environment.

Please visit our Employee Benefits page for more information!

Apply