ZipRecruiter

Log In

1

Volunteer Lab Test Engineer Jobs in Warren, NJ (NOW HIRING)

Aescape Inc

Robotics Test Engineer

New York, NY · On-site

  • Medical

  • Dental

  • Vision

  • Retirement

  • PTO

Aescape is looking for a Robotics Test Engineer to be the technical conscience of Aescape ... You will build on the existing reliability lab at Aescape HQ and partner directly with our contract ...

Hamamatsu Corporation

Test Engineer

Bridgewater, NJ · On-site

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

As a Test Engineer, you'll provide safe, high-quality, and timely service through hands-on testing ... NanoZoomer Scanning Lab Operations * Scan histology/pathology slides using NanoZoomer systems.

Hamamatsu Corporation

Test Engineer

Bridgewater, NJ · On-site

$52K - $65K/yr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

As a Test Engineer, you'll provide safe, high-quality, and timely service through hands-on testing ... NanoZoomer Scanning Lab Operations * Scan histology/pathology slides using NanoZoomer systems.

Inmar

Test Engineer

New York, NY

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

The Test Engineer is responsible for executing software testing processes to ensure the quality ... Voluntary Accident, Critical Illness, and Hospital * Perks and discount programs Please note that ...

LanceSoft Inc

Quality Test Engineer

Cranford, NJ · On-site

Perform testing and full lifecycle support of FiOS products (STB, ONT, BHR) Develop and/or enhance existing lab test architecture including equipment procuring & setups Designing test measurement ...

QCi

Test Engineer,Hardware- Photonics

Hoboken, NJ · On-site

Test Engineer, Hardware Location: Cranbury, NJ About Us Quantum Computing Inc. (QCi) (Nasdaq: QUBT ... Hands-on experience with a wide range of lab equipment and tools related to optoelectronic device ...

Hubbell

Senior Test Engineer - Boonton, NJ

Boonton, NJ · On-site

... lab environment for extended hours. This position is for an engineer who enjoys working on all ... Execute test cases for industrial products which are heavy on Networking and Ethernet-technologies,

New

Victaulic

Controls Engineer

Easton, PA

$79K - $102K/yr

Engineering Lab Technical Lead - Automation THIS ROLE WILL START AS TEMPORARY FOR APPROX. 3-6 ... Design, build, and wire electrical control panels and enclosures in support of lab test systems and ...

next page

Showing results 1-20

All JobsVolunteer Lab Test Engineer JobsVolunteer Lab Test Engineer Jobs in Warren, NJ

Volunteer Lab Test Engineer information

See Warren, NJ salary details

$17

$49

$74

How much do volunteer lab test engineer jobs pay per hour?

As of Aug 17, 2026, the average hourly pay for volunteer lab test engineer in Warren, NJ is $49.76, according to ZipRecruiter salary data. Most workers in this role earn between $38.17 and $62.40 per hour, depending on experience, location, and employer.

What cities near Warren, NJ are hiring for Volunteer Lab Test Engineer jobs?

Cities near Warren, NJ with the most Volunteer Lab Test Engineer job openings:

Volunteer Lab Test Engineer jobs near you

Robotics Test Engineer

Aescape Inc

New York, NY • On-site

Full-time

Medical, Dental, Vision, Retirement, PTO

Posted 5 days ago

Job description

Aescape is a New York-based physical AI and robotics company redefining human recovery through intelligent, precision bodywork, elevating it into a consistent, outcomes-driven practice.
Powered by real-time body mapping, advanced robotics, and proprietary software, Aescape delivers deeply personalized bodywork that continuously adapts to the individual. This creates a superior way for members to move with greater ease, recover more efficiently, and optimize how they feel every single day.
Aescape is building a defining brand for recovery, shifting behavior from a sporadic experience into a progressive, measurable routine, unlocking compounding benefits that build lasting resilience and laying the groundwork for an entirely new category of proactive human health and performance.
Aescape powers recovery across leading fitness, hospitality, and wellness environments, including Equinox, Life Time, Marriott, Hilton, Four Seasons, Pause Studios, and Remedy Place, and is backed by Valor Equity Partners, BroadLight Capital, and Mecha Ventures.
Aescape is looking for a Robotics Test Engineer to be the technical conscience of Aescape's reliability and manufacturing test program, owning test protocols for bench and life testing on complex robotic mechatronic systems through EVT, DVT and PVT and into mass production, spanning mechanical, electrical and software interfaces. You will build on the existing reliability lab at Aescape HQ and partner directly with our contract manufacturer and key suppliers to implement and project manage tests, fixtures and test software on the factory floor. You will sit within Operations, working closely with Quality, Manufacturing, Mechanical, Electrical and Software Engineering. If this sounds like you, we'd love to hear from you!
This role is hybrid, based out of our NYC office in Chelsea.
What You'll Do
  • Reliability & Manufacturing Test Program Ownership: Own the end-to-end reliability and manufacturing test program through NPI and into mass production. Define what gets tested and write the test SOPs, protocols and specifications (scope, equipment requirements, sampling rates, pass/fail criteria), validating against the Engineering Requirements Document (ERD). Manage the test fixture build process with suppliers or a third party, and coordinate and run or oversee testing across HQ, the CM and third-party facilities, ensuring test data is uploaded and reviewed promptly, with failures triaged immediately in partnership with the supplier. Analyze the data and report results to Engineering and Operations for approval.
  • HQ Reliability Lab & Environmental/Life Testing: Maintain and develop the existing Aescape HQ reliability lab, commissioning equipment and fixtures as needed and ensuring calibration and lab discipline. Plan and execute environmental and life testing in-house or co-ordinate via a third-party lab, aligned to standards such as MIL-STD-810, IEC 60068, IPC and HALT/HASS where appropriate.
  • Factory & Supplier Test Implementation: Define and deploy reliability and manufacturing tests and test scripts at our contract manufacturer and key suppliers, project managing test fixture development by the CM and suppliers through to implementation.
  • Failure Analysis & Root Cause: Lead failure analysis on parts and assemblies from HQ, third-party lab, and supplier testing; work with Mechanical, Electrical and Software Engineering to drive issues to root cause and close out corrective actions back into the design and test protocol.
  • International Travel: ~10% international travel required (to CM and supplier sites).
What You'll Bring
  • Education & Experience: BS in Electrical, Mechanical, Mechatronics, Test or a related engineering discipline with a minimum of 5 years of reliability and test engineering experience in a hardware product environment (robotics, consumer electronics, or similar).
  • Reliability Test Mindset: You approach every test with a clear question in mind, what could fail, how, and when, and hunt failures to root cause, staying with them until corrective actions are verified, not just identified.
  • Coding Fluency: Strong Python (or equivalent) for test automation, data parsing and analysis; able to write production-quality test scripts and data-processing pipelines independently.
  • Process-Driven & Detail-Oriented: Highly disciplined about following, documenting and improving processes; writes clear procedures, test SOPs, specifications and reports, and validates tests against engineering requirements documentation; adheres precisely to established test protocols and catches inconsistencies others miss.
  • Hands-On Lab Engineering: Comfortable specifying, commissioning and operating reliability test equipment including life rigs, data acquisition systems, oscilloscopes and electrical loads. Able to build or oversee the build of test fixtures.
  • Contract Manufacturer & Supplier Partnership: Experience working directly with contract manufacturers and suppliers to implement and project manage tests, test fixtures and test software on the factory floor.
  • Statistical Rigour & Sampling: Strong grasp of statistical analysis including distributions, control limits, capability studies (Cpk), Gauge R&R, DOE, hypothesis testing, sampling rates/plans (AQL) and accelerated-life models (Weibull). Working knowledge of reliability test standards (e.g. MIL-STD-810, IEC 60068, HALT/HASS). Use data rather than opinion to make pass/fail and design decisions.
  • Communication & Collaboration: Strong verbal and written skills for presenting test findings and providing clear documentation of work.
  • Adaptability: Comfortable with ambiguity and able to pivot as priorities shift in a fast-moving startup; willing to take on tasks outside your core role when required.
  • 3D Modelling: Experience with SolidWorks or equivalent CAD tool for fixture and test rig design review.
  • LabVIEW: Proficiency preferred (CLAD or higher).
  • Work Onsite: Ability to work in our NYC office 3 days a week.
  • International Travel: Ability to travel internationally to CM and supplier sites (~10%)

What's In It For You
  • Join a trailblazing robotics and AI company building the future of recovery
  • The chance to make a difference with a product that empowers healthier and happier living
  • Team culture driven by passion, ambition, empowerment, inclusion, curiosity, and fun!
  • 100% employer-paid healthcare coverage for employees with generous coverage for eligible dependents
  • Flexible time off
  • Quarterly Wellness Days - everyone fully unplugs
  • Generous parental leave
  • Complimentary OneMedical membership
  • 401(k) with employer matching
  • Home office budget
  • Annual stipend for professional development
  • Working late? Dinner is on us
  • Complimentary Aescape recovery sessions for yourself, friends & family

Compensation: Base salary range of $140,000 - $170,000 annually, plus discretionary annual bonus, plus equity grant commensurate with the role and company stage. Full-time employees are also eligible for our comprehensive benefits package, including medical, dental, and vision coverage, 401(k), paid time off, and paid parental leave.
Equal Opportunity Employer
Aescape is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by applicable law. The salary range listed above is a good-faith estimate provided in accordance with New York City's pay transparency law.
Begin Your Aescape Career Journey
At Aescape, we're on a mission to redefine self-care for a better world, and we're seeking trailblazers to join us on this journey. We're inspired by individuals who are passionate, driven, and eager to learn. We value diverse perspectives and resourceful, determined individuals who are committed to making a difference. At Aescape, we empower people to reach their full potential, just as our product empowers better living. If you're ready to innovate, create, and make a meaningful impact, we want you on our team.
YOUR JOURNEY. YOUR AESCAPE.

Apply