Process Engineer
Austin, TX · On-site
Specify and implement torque control processes, including selection and setup of digital/smart torque tools; support calibration and data-tracking requirements for torque-critical assemblies.
New
Quick apply
Process Engineer
Austin, TX · On-site
Specify and implement torque control processes, including selection and setup of digital/smart torque tools; support calibration and data-tracking requirements for torque-critical assemblies.
New
Torque vs Tension * Fabrication * Ability to read cut sheets. * Lay out from drawing. * Cut material from lay out and cut sheets. * Torque vs. Tension * Knowledge of Torque and Values * Knowledge of ...
Torque vs Tension * Fabrication * Ability to read cut sheets. * Lay out from drawing. * Cut material from lay out and cut sheets. * Torque vs. Tension * Knowledge of Torque and Values * Knowledge of ...
Mechanical Assembler
$18 - $20/hr
Torque fasteners to specified values using a torque wrench and follow documented torque specifications. * Read and interpret blueprints, work instructions, and tape measure measurements to complete ...
Quick apply
Mechanical Assembler
$18 - $20/hr
Torque fasteners to specified values using a torque wrench and follow documented torque specifications. * Read and interpret blueprints, work instructions, and tape measure measurements to complete ...
Warehouse
$16/hr
Removing Valves from Tanks using Torque Wrench * Installing new valves using Torque Wrench * Painting Tanks and adding Stencil * Decompressing Tanks * Operating the overhead Crane Requirements * 2+ ...
Warehouse
$16/hr
Removing Valves from Tanks using Torque Wrench * Installing new valves using Torque Wrench * Painting Tanks and adding Stencil * Decompressing Tanks * Operating the overhead Crane Requirements * 2+ ...
The Tubular Services Technician I (Torque Turn Tech I) will require close supervision for the first few months on the job or until confident to fulfill duties on their own. * This position requires ...
The Tubular Services Technician I (Torque Turn Tech I) will require close supervision for the first few months on the job or until confident to fulfill duties on their own. * This position requires ...
The Tubular Services Technician I (Torque Turn Tech I) will require close supervision for the first few months on the job or until confident to fulfill duties on their own. * This position requires ...
The Tubular Services Technician I (Torque Turn Tech I) will require close supervision for the first few months on the job or until confident to fulfill duties on their own. * This position requires ...
TUBULAR SERVICES TECHNICIAN III - WEST TEXAS
Odessa, TX · On-site
$37K - $48K/yr
The Tubular Services Technician III (Torque Turn Tech I) will require close supervision for the first few months on the job or until confident to fulfill duties on their own. * This position requires ...
TUBULAR SERVICES TECHNICIAN III - WEST TEXAS
Odessa, TX · On-site
$37K - $48K/yr
The Tubular Services Technician III (Torque Turn Tech I) will require close supervision for the first few months on the job or until confident to fulfill duties on their own. * This position requires ...
TUBULAR SERVICES TECHNICIAN III - WEST TEXAS
Odessa, TX · On-site
$31K - $40K/yr
The Tubular Services Technician III (Torque Turn Tech I) will require close supervision for the first few months on the job or until confident to fulfill duties on their own. * This position requires ...
TUBULAR SERVICES TECHNICIAN III - WEST TEXAS
Odessa, TX · On-site
$31K - $40K/yr
The Tubular Services Technician III (Torque Turn Tech I) will require close supervision for the first few months on the job or until confident to fulfill duties on their own. * This position requires ...
The Tubular Services Technician I (Torque Turn Tech I) will require close supervision for the first few months on the job or until confident to fulfill duties on their own. * This position requires ...
The Tubular Services Technician I (Torque Turn Tech I) will require close supervision for the first few months on the job or until confident to fulfill duties on their own. * This position requires ...
The Tubular Services Technician I (Torque Turn Tech I) will require close supervision for the first few months on the job or until confident to fulfill duties on their own. * This position requires ...
The Tubular Services Technician I (Torque Turn Tech I) will require close supervision for the first few months on the job or until confident to fulfill duties on their own. * This position requires ...
The Tubular Services Technician I (Torque Turn Tech I) will require close supervision for the first few months on the job or until confident to fulfill duties on their own. * This position requires ...
The Tubular Services Technician I (Torque Turn Tech I) will require close supervision for the first few months on the job or until confident to fulfill duties on their own. * This position requires ...
TUBULAR SERVICES TECHNICIAN I - WEST TEXAS
Odessa, TX · On-site
$16.75 - $23/hr
The Tubular Services Technician I (Torque Turn Tech I) will require close supervision for the first few months on the job or until confident to fulfill duties on their own. * This position requires ...
TUBULAR SERVICES TECHNICIAN I - WEST TEXAS
Odessa, TX · On-site
$16.75 - $23/hr
The Tubular Services Technician I (Torque Turn Tech I) will require close supervision for the first few months on the job or until confident to fulfill duties on their own. * This position requires ...
Ironworker Fabricator/Boilermaker
$21.25 - $28/hr
Torque vs. Tension o Knowledge of Torque and Values o Knowledge of Tension o Turn of the nut method o Different types of indicators o Understand how to use a skidmore * Plan work and execute
Ironworker Fabricator/Boilermaker
$21.25 - $28/hr
Torque vs. Tension o Knowledge of Torque and Values o Knowledge of Tension o Turn of the nut method o Different types of indicators o Understand how to use a skidmore * Plan work and execute
Ironworker Fabricator/Boilermaker
Freeport, TX · On-site
$21.25 - $28/hr
Torque vs. Tension o Knowledge of Torque and Values o Knowledge of Tension o Turn of the nut method o Different types of indicators o Understand how to use a skidmore * Plan work and execute
Ironworker Fabricator/Boilermaker
Freeport, TX · On-site
$21.25 - $28/hr
Torque vs. Tension o Knowledge of Torque and Values o Knowledge of Tension o Turn of the nut method o Different types of indicators o Understand how to use a skidmore * Plan work and execute
Field Service Technician - Level 3
Kenedy, TX · On-site
$26/hr
Assemble and torque connections at API standards. * Verify all torque connections and ensure full functionality of Scout and third-party equipment. * Troubleshoot equipment and report any ...
Field Service Technician - Level 3
Kenedy, TX · On-site
$26/hr
Assemble and torque connections at API standards. * Verify all torque connections and ensure full functionality of Scout and third-party equipment. * Troubleshoot equipment and report any ...
The Tubular Services Technician I (Torque Turn Tech I) will require close supervision for the first few months on the job or until confident to fulfill duties on their own. * This position requires ...
The Tubular Services Technician I (Torque Turn Tech I) will require close supervision for the first few months on the job or until confident to fulfill duties on their own. * This position requires ...
The Tubular Services Technician I (Torque Turn Tech I) will require close supervision for the first few months on the job or until confident to fulfill duties on their own. * This position requires ...
The Tubular Services Technician I (Torque Turn Tech I) will require close supervision for the first few months on the job or until confident to fulfill duties on their own. * This position requires ...
This includes verifying proper torque of all lug nuts and confirming that the oil pan drain plug and oil filter housing are properly secured and free of leaks. The QC Specialist serves as the final ...
This includes verifying proper torque of all lug nuts and confirming that the oil pan drain plug and oil filter housing are properly secured and free of leaks. The QC Specialist serves as the final ...
This includes verifying proper torque of all lug nuts and confirming that the oil pan drain plug and oil filter housing are properly secured and free of leaks. The QC Specialist serves as the final ...
This includes verifying proper torque of all lug nuts and confirming that the oil pan drain plug and oil filter housing are properly secured and free of leaks. The QC Specialist serves as the final ...
This includes verifying proper torque of all lug nuts and confirming that the oil pan drain plug and oil filter housing are properly secured and free of leaks. The QC Specialist serves as the final ...
This includes verifying proper torque of all lug nuts and confirming that the oil pan drain plug and oil filter housing are properly secured and free of leaks. The QC Specialist serves as the final ...
Torque information
See Texas salary details
$27.5K - $33.1K
3% of jobs
$33.1K - $38.7K
12% of jobs
$42.6K is the 25th percentile. Wages below this are outliers.
$38.7K - $44.3K
15% of jobs
$44.3K - $49.8K
14% of jobs
The median wage is $52.9K / yr.
$49.8K - $55.4K
13% of jobs
$55.4K - $61K
11% of jobs
$64.3K is the 75th percentile. Wages above this are outliers.
$61K - $66.6K
15% of jobs
$66.6K - $72.2K
5% of jobs
$72.2K - $77.8K
7% of jobs
$77.8K - $83.4K
3% of jobs
$83.4K - $89K
3% of jobs
$27.5K
$56.7K
$89K
How much do torque jobs pay per year?
As of Aug 6, 2026, the average yearly pay for torque in Texas is $56,685.00, according to ZipRecruiter salary data. Most workers in this role earn between $42,900.00 and $65,200.00 per year, depending on experience, location, and employer.
What are the key skills and qualifications needed to thrive in the torque position, and why are they important?
To thrive as a Torque Technician, you need a solid understanding of mechanical systems, torque specifications, and the proper use of hand and power tools, often supported by a technical diploma or relevant certifications. Familiarity with torque measurement devices, calibration equipment, and industry safety standards is typically required. Attention to detail, problem-solving abilities, and clear communication are valuable soft skills in this position. These competencies are crucial for ensuring accurate assembly, equipment reliability, and workplace safety.
What can I expect from a typical workday as a torque technician?
As a Torque Technician, your typical day involves performing precision tightening of fasteners on mechanical assemblies, using torque wrenches and calibrated tools to meet exact specifications. You may also conduct inspections, document results, and collaborate with engineers or quality control teams to address issues or verify standards. Challenges can include working in confined spaces, keeping up with multiple projects, and ensuring all work meets safety and regulatory requirements. Most technicians work as part of a team in manufacturing, automotive, or industrial environments, with opportunities for skill development and advancement into supervisory or quality assurance roles.
What is a torque?
A Torque job is a task or set of tasks managed by the Torque resource manager, commonly used in high-performance computing (HPC) environments. It allows users to submit, schedule, and monitor jobs on a cluster of computing nodes. Torque ensures efficient allocation of resources, including CPU and memory, to optimize performance. Users typically interact with Torque through job scripts and command-line tools.
What are popular job titles related to Torque jobs in Texas? For Torque jobs in Texas, the most frequently searched job titles are:
What job categories do people searching Torque jobs in Texas look for? The top searched job categories for Torque jobs in Texas are:
What cities in Texas are hiring for Torque jobs? Cities in Texas with the most Torque job openings:
Full-time
Medical, Dental, Retirement, PTO
Posted 2 days ago
New
Job description
Process Engineer
Interested in getting in at the ground floor of a new, disruptive company attacking an important multi-billion-dollar problem? Businesses and consumers continue to demand increasing data services at an exponential rate -- streaming, deep learning, analytics, loT connectivity, and more. What this means is higher performing CPUs, components, servers, and ultimately Data and Edge computing centers, all generating excessive heat that is increasingly difficult to manage with traditional cooling systems. Accelsius is developing revolutionary direct-to-chip, 2-Phase cooling technologies that empower and enable Server OEMs, Data Centers, and Edge Computing Operators to meet performance, sustainability, scale, and cost goals while serving this high-growth market for data services.
Accelsius is looking for a Process Engineer to join our engineering team as a hands-on manufacturing partner, moving fluidly between the CAD workstation and the shop floor to design and build prototype parts, jigs, and fixtures, develop clear work instructions, and train and certify operators on new processes. This position will report directly to the Director, Operations Engineering and the right candidate will combine strong technical fundamentals with practical, hands-on manufacturing skill and work closely with Quality to ensure processes are robust, repeatable, and well documented.
Role Responsibilities:
- Design, build, and iterate on prototype parts, jigs, fixtures, and tooling to support new product introduction and continuous improvement of existing processes.
- Create and maintain detailed work instructions, process documentation, and visual aids for shop floor operators.
- Train operators on new and revised processes; develop and administer operator certification programs.
- Partner with Quality to investigate process-related issues, drive root cause analysis, and implement corrective and preventive actions.
- Use CAD software (SolidWorks or equivalent) to design fixtures, tooling, and prototype components.
- Specify and implement torque control processes, including selection and setup of digital/smart torque tools; support calibration and data-tracking requirements for torque-critical assemblies.
- Define in-process inspection methods and tools for process-critical criteria; train operators to use these tools effectively and consistently.
- Work with the team to convert work instructions and in-process inspections into a traveler that preserves build history for traceability.
- Support machine shop activities as needed, including basic machining, fabrication, and modification of fixtures and prototype hardware.
- Collaborate cross-functionally with Design Engineering, Manufacturing Engineering, and Operations to support engineering change orders (ECOs) and product transfers to production.
- Identify and lead continuous improvement initiatives to improve safety, quality, throughput, and cost.
- Maintain accurate process documentation in the MES and related systems, and support audits as needed.
Qualifications for this role include:
- Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, or a related field.
- 5-7+ years of process engineering experience in a manufacturing facility.
- Hands-on experience designing and building prototype parts, jigs, and fixtures.
- Proficiency in CAD software (SolidWorks strongly preferred).
- Able to read and interpret mechanical drawings, and provide feedback to Design Engineering when needed.
- Able to conceptualize, design, and fabricate fixtures and tooling from concept through implementation.
- Experience creating work instructions for the manufacturing floor.
- Demonstrated experience training and certifying production operators.
- Experience working cross-functionally with Quality teams on process control, non-conformances, and continuous improvement.
- Experience with torque tools; familiarity with digital or smart torque tools and torque data tracking is a strong plus.
- Machine shop experience (manual mill/lathe, basic fabrication) is a plus.
- Startup experience is a plus.
Preferred Skills:
- Experience with MES systems and electronic work instruction platforms.
- Familiarity with JIRA or similar tools for tracking engineering changes and issues.
- Experience supporting engineering change order (ECO) processes and product transfers from engineering to production.
- Strong communication skills and the ability to train and mentor production operators effectively.
Physical Requirements:
- Ability to work on the manufacturing floor, including standing, bending, and lifting up to 35 lbs. as needed.
- Comfortable working with hand tools, power tools, and shop equipment in a manufacturing environment.
Accelsius offers a competitive salary with equity, a full range of benefits including medical and dental, 401K, and flexible PTO.
The position is based on-site at Accelsius's Austin, Texas manufacturing facility.
This position includes the responsibilities outlined above and may also encompass additional duties as assigned to meet business and compliance needs.
Accelsius does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, veteran status, marital status, or based on an individual's status in any group or class protected by applicable federal, state or local law. Accelsius encourages applications from minorities, women, the disabled, protected veterans, and all other qualified applicants.
About Accelsius
Sourced by ZipRecruiter
Industry
Computer and peripheral equipment manufacturing
Company size
1 - 10 Employees
Headquarters location
Austin, TX, US
Year founded
2022