1

Thread Inspector Jobs in Midland, TX (NOW HIRING)

Inspect worksite to determine presence of obstructions and to determine that holes will not cause ... Thread pipe using threading machine * Bend pipe by hand or with pipe-bending machine * Assemble and ...

Inspect worksite to determine presence of obstructions and to determine that holes will not cause ... Thread pipe using threading machine * Bend pipe by hand or with pipe-bending machine * Assemble and ...

Inspect worksite to determine presence of obstructions and to determine that holes will not cause ... Thread pipe using threading machine * Bend pipe by hand or with pipe-bending machine * Assemble and ...

Inspect worksite to determine presence of obstructions and to determine that holes will not cause ... Thread pipe using threading machine * Bend pipe by hand or with pipe-bending machine * Assemble and ...

Boilermaker

Odessa, TX

$26 - $31.50/hr

Knowledge of wire rope components and inspection requirements and procedures for wire rope, load ... Cut and thread pipe manually ; Read and interprit welding detail drawings ; Perform boiler tube ...

Boilermaker

Odessa, TX · On-site

$26 - $31.50/hr

Knowledge of wire rope components and inspection requirements and procedures for wire rope, load ... Cut and thread pipe manually ; Read and interprit welding detail drawings ; Perform boiler tube ...

Tech 1 Fluid End NEX

Odessa, TX · On-site

$15.25 - $18.50/hr

Examines retainer nuts for cracked or broken threads. * Inspects seat desks for cracks or ... Conducts final inspections to ensure equipment safety and efficiency. * Performs other job duties ...

Tech 1 Fluid End NEX

Odessa, TX · On-site

$15.25 - $18.50/hr

Examines retainer nuts for cracked or broken threads. * Inspects seat desks for cracks or ... Conducts final inspections to ensure equipment safety and efficiency. * Performs other job duties ...

Journeyman Electrician

Odessa, TX

$23.50 - $32.25/hr

Measures, cuts, bends, threads, assemble, and install electrical conduit. * Pulls wiring through ... Inspect electrical systems, equipment, and components to identify hazards, defects, and the need ...

Electrician IV

Kermit, TX · On-site

$23.75 - $32.50/hr

Troubleshoot, repair, inspect, and maintain electrical systems and oilfield production equipment ... var(-thread-response-height))] scroll-mt-[calc(var(-header-height)+min(200px,max(70px,20svh ...

... inspection and audit performance. • Work with Supply Chain and Operations to develop KPI's and ... thread and other connections. • Strong familiarity with FMC and Forum flow iron and SPM Safety ...

Develop monthly reports showing internal inspection and audit performance. Work with Supply Chain ... wing to thread and other connections. Strong familiarity with FMC and Forum flow iron and SPM ...

Check alignments, clearances, bore size, welds, threads or damaged holes to determine what further ... Must be able to visually inspect machines. * Must be able to lift and carry up to 50 pounds. GD ...

Showing results 21-40

Thread Inspector information

See Midland, TX salary details

$10

$20

$26

How much do thread inspector jobs pay per hour?

As of Aug 21, 2026, the average hourly pay for thread inspector in Midland, TX is $20.02, according to ZipRecruiter salary data. Most workers in this role earn between $16.51 and $22.34 per hour, depending on experience, location, and employer.

What is a thread inspector?

Thread Inspectors are quality control professionals who examine threaded components, such as screws, bolts, and pipe fittings, to ensure they meet specific standards and tolerances. They use tools like thread gauges, micrometers, and visual inspection methods to check for defects, incorrect thread pitch, or damage. Their work is critical in industries like manufacturing and construction, where the integrity of threaded parts impacts safety and performance. Thread Inspectors also document their findings and may recommend corrective actions if products do not meet specifications.

What are the key skills and qualifications needed to thrive as a thread inspector, and why are they important?

To thrive as a Thread Inspector, you need a solid understanding of thread standards, precision measurement techniques, and quality control, often supported by a high school diploma or technical training. Familiarity with gauges, micrometers, calipers, and sometimes computerized inspection systems is typically required. Attention to detail, problem-solving abilities, and effective communication skills are crucial soft skills for success in this role. Mastering these competencies ensures accurate inspections, reduces defects, and maintains manufacturing quality standards.

What are some common challenges faced by thread inspectors and how can they be effectively managed?

Thread Inspectors often encounter challenges such as identifying subtle defects in threads, maintaining accuracy during repetitive inspections, and keeping up with production schedules. To manage these, inspectors typically rely on standardized measuring tools, clear documentation practices, and ongoing training in quality standards. Collaboration with machine operators and supervisors is also key to swiftly addressing issues and ensuring product quality throughout the production process.

What is the difference between Thread Inspector vs Sewing Machine Operator?

AspectThread InspectorSewing Machine Operator
Required CredentialsHigh school diploma, quality control trainingHigh school diploma, sewing machine operation training
Work EnvironmentManufacturing or quality control facilitiesFactories, garment production lines
Employer & Industry UsageTextile, apparel manufacturing, quality assuranceTextile, apparel, upholstery manufacturing
Common Search & Comparison IntentQuality inspection, defect detectionSewing, garment assembly

The main difference is that a Thread Inspector focuses on examining threads for defects and quality issues during production, while a Sewing Machine Operator actively operates sewing machines to assemble products. Both roles are essential in textile manufacturing but serve different functions within the production process.

How to become a thread inspector?

To become a thread inspector, candidates typically need a high school diploma or equivalent and should develop skills in quality control, attention to detail, and familiarity with inspection tools. Some positions may require experience with manufacturing processes or certifications in quality assurance. On-the-job training is common, and knowledge of safety standards is beneficial.

What are popular job titles related to Thread Inspector jobs in Midland, TX?

For Thread Inspector jobs in Midland, TX, the most frequently searched job titles are:

What cities near Midland, TX are hiring for Thread Inspector jobs?

Cities near Midland, TX with the most Thread Inspector job openings:

Infographic showing various Thread Inspector job openings in Midland, TX as of August 2026, with employment types broken down into 80% Full Time, 12% Part Time, 6% Contract, and 2% Nights. Highlights an 96% Physical, 1% Hybrid, and 3% Remote job distribution, with an average salary of $41,636 per year, or $20 per hour.

Pipefitter Journeyman

MasTec Inc

Odessa, TX • On-site

Full-time

Medical, Dental, Vision, Retirement

Re-posted 14 days ago


MasTec rating

7.4

Company rating: 7.4 out of 10

Based on 155 frontline employees who took The Breakroom Quiz

34th of 80 rated construction


Job description

Overview

COMPANY OVERVIEW

MasTec’s Clean Energy and Infrastructure Group (CE&I) is a $2 billion annual revenue business unit that provides construction services for industrial facilities; building products manufacturers, power generation facilities, manufacturing plants; solar, wind, and thermal energy plants; buildings, and infrastructure.

Within the CE&I group, the MasTec Industrial sector includes sister companies Casey Industrial, Phoenix Industrial and Wanzek Industrial. This collective industrial group provides a merit shop, multi-craft industrial contractor with the ability to self-perform all major craft trades that ensures greater safety, quality, flexibility, and economy in delivering the work required to complete each project. The collective experience and knowledge of this team provides comprehensive project development, pre-construction planning, and project management with the mastery to successfully manage projects that meet deliverable and budgetary requirements. With every project, we commit to providing the highest levels of quality, safety, and value.

At MasTec Industrial, we are committed to attracting, developing and retaining the best talent. No matter your role, you will have the opportunity to contribute to our success as we deliver innovative solutions to our clients.

 

POSITION SUMMARY:

Responsible for laying out, fabricating, assembling, installing and maintaining piping and piping systems, fixtures and equipment for steam, hot water, heating, cooling, lubricating, sprinkling and industrial processing systems.


Responsibilities

ESSENTIAL JOB FUNCTIONS:

  • Promote and comply with all Company and safety policies and procedures
  • Select type and size of pipe and related materials according to job specifications
  • Inspect worksite to determine presence of obstructions and to determine that holes will not cause structural weakness
  • Plan sequence of installation to avoid obstructions and activities of other construction workers
  • Cut pipe using hacksaw, pipe cutters, hammer and chisel, cutting torch and pipe cutting machine
  • Thread pipe using threading machine
  • Bend pipe by hand or with pipe-bending machine
  • Assemble and install a variety of metal and nonmetal pipe and pipe fittings, including: brass, copper, lead, glass and plastic
  • Join pipe by means of threaded, caulked, wiped, soldered, brazed, fused or cemented joints
  • Use hand tools to secure pipe to structure with clamps, brackets and hangers
  • Install and maintain refrigeration and air-conditioning systems, including: compressors, pumps, meters, pneumatic and hydraulic controls and piping
  • Test piping system for leaks by increasing pressure in pipes and observing gauges attached to pipes for indication of leaks
  • Weld holding fixtures to structural steel members
  • May be required to travel to different jobsites on limited notice
  • Other duties as assigned by Foreman or Superintendent

Qualifications

EDUCATION AND WORK EXPERIENCE REQUIREMENTS:

  • 4+ years related experience and/or training or equivalent combination of education and experience
  • High school diploma or GED Certification (preferred)
  • Applicable Pipefitter training and certificate from NCCER, NCCCO, or from approved 3rd party certification body (preferred)

KNOWLEDGE, SKILLS, AND ABILITIES REQUIRED:

  • Be knowledgeable of MIC Health and Safety programs and project specific regulations.
  • When on-site, actively participate in daily toolbox meetings with crews and subcontractors.
  • Set a personal example of safe behavior.
  • Read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals
  • Add and subtract two-digit numbers, multiply and divide with 10's and 100's and ability to perform these operations using units weight measurement and volume
  • Common sense understanding to carry out instructions furnished in written or oral form
  • Ability to work within precise standards of accuracy and follow set procedures and standards
  • Other may duties may be assigned
  • Maintain in-depth relations with all members of their team and your supervisor.

PHYSICAL DEMANDS:

  • Work up to a 12-hour shift doing hard physical work in varying temperatures and outside conditions.
  • May need to maintain physical strength and stamina; Use arms, hands, and legs fully; Push, pull, and frequently lift and carry objects weighing up to 50 pounds; and stoop, kneel, balance, crouch, crawl, and climb to perform job tasks.
  • Stamina to perform this task repetitively and continuously for several hour intervals.
  • Uncontrolled environmental conditions: Constant change in weather and site conditions.
  • This work environment may involve moderate exposure to unusual elements, such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises.
  • Ability to wear personal protective equipment is required (including but not limited to- safety toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.).
  • Move in and around confined, cluttered, and uneven areas.
  • May need to work at heights and must be able to abide by all safety and fall-protection requirements; must be able to wear and utilize all safety equipment required for work at heights.
  • Evaluate information based on measurable standards; and see details in objects or drawings and recognize slight differences in shapes and shadings.
  • Visualize objects in three dimensions from drawings.
  • Keep good balance and work at heights.
  • See well (either naturally or with correction).
  • Hear well (either naturally or with correction.)
  • Coordinate the use of eyes, hands, and feet.

HOURS:

This position is a Full-Time position scheduled to work typically 50 hours per week.  Schedule is subject to projects requirements.

TRAVEL:

Travel required up to 90%.  Position requires presence directly on the Project Site location with intermittent travel to residence of record.

What's in it for You

Financial Wellbeing

  • Compensation $35 / hour, commensurate with experience

  • Competitive pay with ongoing performance review and merit increase

  • 401(k) with company match & Employee Stock Purchase Plan (ESPP)

  • Flexible spending account (Healthcare & Dependent care)

Health & Wellness

  • Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children

  • Diabetes Management, Telehealth Coverage, Prescription Drug Plan, Pet Insurance, Weight Management Drug Discount

  • Discounted National Gym Membership Network

  • Employee Assistance Program

Planning for the Unexpected

  • Short and long-term disability, life insurance, and accidental death & dismemberment

  • Voluntary life insurance, accident, critical illness, hospital indemnity coverage

  • Emergency Travel Assistance Program

  • Group legal plan

Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need accommodation as part of the employment process, contact ceicareers@mastec.com. Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information. 

MasTec, Inc. is an Equal Employment Opportunity Employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions.

Disclaimer: MasTec and our Subsidiaries will never ask prospective employees for any form of payment or money transfer as part of job application or onboarding. We do not ask prospective employees for information about credit cards or personal passwords, and it does not require applicants to purchase equipment or software. Ensure that all recruiter email addresses end in @mastec.com or @talent.icims.com. If you suspect you are the target of a scam, we advise you to contact your local law enforcement agency and report fraud at https://reportfraud.ftc.gov/.

MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team.

Qualifications:

EDUCATION AND WORK EXPERIENCE REQUIREMENTS:

  • 4+ years related experience and/or training or equivalent combination of education and experience
  • High school diploma or GED Certification (preferred)
  • Applicable Pipefitter training and certificate from NCCER, NCCCO, or from approved 3rd party certification body (preferred)

KNOWLEDGE, SKILLS, AND ABILITIES REQUIRED:

  • Be knowledgeable of MIC Health and Safety programs and project specific regulations.
  • When on-site, actively participate in daily toolbox meetings with crews and subcontractors.
  • Set a personal example of safe behavior.
  • Read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals
  • Add and subtract two-digit numbers, multiply and divide with 10's and 100's and ability to perform these operations using units weight measurement and volume
  • Common sense understanding to carry out instructions furnished in written or oral form
  • Ability to work within precise standards of accuracy and follow set procedures and standards
  • Other may duties may be assigned
  • Maintain in-depth relations with all members of their team and your supervisor.

PHYSICAL DEMANDS:

  • Work up to a 12-hour shift doing hard physical work in varying temperatures and outside conditions.
  • May need to maintain physical strength and stamina; Use arms, hands, and legs fully; Push, pull, and frequently lift and carry objects weighing up to 50 pounds; and stoop, kneel, balance, crouch, crawl, and climb to perform job tasks.
  • Stamina to perform this task repetitively and continuously for several hour intervals.
  • Uncontrolled environmental conditions: Constant change in weather and site conditions.
  • This work environment may involve moderate exposure to unusual elements, such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises.
  • Ability to wear personal protective equipment is required (including but not limited to- safety toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.).
  • Move in and around confined, cluttered, and uneven areas.
  • May need to work at heights and must be able to abide by all safety and fall-protection requirements; must be able to wear and utilize all safety equipment required for work at heights.
  • Evaluate information based on measurable standards; and see details in objects or drawings and recognize slight differences in shapes and shadings.
  • Visualize objects in three dimensions from drawings.
  • Keep good balance and work at heights.
  • See well (either naturally or with correction).
  • Hear well (either naturally or with correction.)
  • Coordinate the use of eyes, hands, and feet.

HOURS:

This position is a Full-Time position scheduled to work typically 50 hours per week.  Schedule is subject to projects requirements.

TRAVEL:

Travel required up to 90%.  Position requires presence directly on the Project Site location with intermittent travel to residence of record.

What's in it for You

Financial Wellbeing

  • Compensation $35 / hour, commensurate with experience

  • Competitive pay with ongoing performance review and merit increase

  • 401(k) with company match & Employee Stock Purchase Plan (ESPP)

  • Flexible spending account (Healthcare & Dependent care)

Health & Wellness

  • Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children

  • Diabetes Management, Telehealth Coverage, Prescription Drug Plan, Pet Insurance, Weight Management Drug Discount

  • Discounted National Gym Membership Network

  • Employee Assistance Program

Planning for the Unexpected

  • Short and long-term disability, life insurance, and accidental death & dismemberment

  • Voluntary life insurance, accident, critical illness, hospital indemnity coverage

  • Emergency Travel Assistance Program

  • Group legal plan

Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need accommodation as part of the employment process, contact ceicareers@mastec.com. Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information. 

MasTec, Inc. is an Equal Employment Opportunity Employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec'...


What MasTec employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom