ZipRecruiter

Log In

1

Temporary Flight Test Instrumentation Jobs in Houston, TX

Venus Aerospace

Instrumentation Engineer

Houston, TX · On-site

Instrumentation Engineer The Instrumentation Engineer is a self-motivated, proactive professional ... Experience in aerospace, propulsion testing, or flight test * Familiarity with LabVIEW, MATLAB ...

Venus Aerospace

Instrumentation Engineer

Houston, TX

Instrumentation Engineer The Instrumentation Engineer is a self-motivated, proactive professional ... Experience in aerospace, propulsion testing, or flight test * Familiarity with LabVIEW, MATLAB ...

Venus Aerospace

Instrumentation Engineer

Houston, TX · On-site

Instrumentation Engineer The Instrumentation Engineer is a self-motivated, proactive professional ... Experience in aerospace, propulsion testing, or flight test * Familiarity with LabVIEW, MATLAB ...

Pae

Project Engineer / AI&T Technical Lead

Houston, TX · On-site

Experience with Assembly, Integration, and Test of flight or flight-like hardware. * Experience supporting integrated testing involving structures, avionics, power, C&DH, instrumentation, telemetry ...

Venus Aerospace

Instrumentation Technician

Houston, TX · On-site

... flight. You'll own the installation, calibration, and maintenance of critical instrumentation that drives real-time data collection across our test platforms. Your attention to detail, technical ...

Venus Aerospace

Instrumentation Technician

Houston, TX · On-site

... speed flight. You'll own the installation, calibration, and maintenance of critical instrumentation that drives real-time data collection across our test platforms. Your attention to detail ...

NeuroNav

Test Engineer

Houston, TX · On-site

$70 - $90/hr

... flight. Our team thrives on solving the toughest engineering challenges and pushing the boundaries ... Generate and revise piping and instrumentation diagrams (P&IDs) for new and existing test stands ...

New

Venus Aerospace

Test Operator

Houston, TX · On-site

$17.50 - $21.50/hr

... speed flight. Our team thrives on solving the toughest engineering challenges and pushing the ... Operate and monitor test stand systems, propulsion hardware, and instrumentation. * Lead the ...

Venus Aerospace

Test Operator

Houston, TX · On-site

$17.50 - $21.50/hr

... speed flight. Our team thrives on solving the toughest engineering challenges and pushing the ... Operate and monitor test stand systems, propulsion hardware, and instrumentation. * Lead the ...

next page

Showing results 1-20

All JobsFlight Test Instrumentation JobsTemporary Flight Test Instrumentation JobsTemporary Flight Test Instrumentation Jobs in Houston, TX

Temporary Flight Test Instrumentation information

See Houston, TX salary details

$81.2K

$109.8K

$131.3K

How much do temporary flight test instrumentation jobs pay per year?

As of Aug 19, 2026, the average yearly pay for temporary flight test instrumentation in Houston, TX is $109,821.00, according to ZipRecruiter salary data. Most workers in this role earn between $95,500.00 and $124,100.00 per year, depending on experience, location, and employer.

What is the difference between Temporary Flight Test Instrumentation vs Flight Test Engineer?

AspectTemporary Flight Test InstrumentationFlight Test Engineer
CredentialsTechnical certifications, specialized training in instrumentationEngineering degree, often with aerospace specialization
Work EnvironmentOn-site during flight tests, focus on instrumentation setup and data collectionDesign, plan, and analyze flight tests, often in labs and on test ranges
Employer & IndustryAerospace companies, defense contractors, research organizationsAircraft manufacturers, aerospace firms, government agencies

Temporary Flight Test Instrumentation specialists focus on installing, maintaining, and collecting data from testing equipment during flight tests. Flight Test Engineers oversee the entire testing process, including planning, analysis, and reporting. While both roles work closely during flight tests, the instrumentation role is more technical and hands-on, whereas the engineer role involves broader test design and analysis.

Temporary Flight Test Instrumentation jobs near you

Instrumentation Engineer

Venus Aerospace

Houston, TX • On-site

Full-time

Medical, Dental, Vision, Retirement, PTO

Re-posted 14 days ago

Job description

Who We Are:
Venus Aerospace is revolutionizing rocket engine propulsion. With the first generational leap in rocket engine technology since Apollo, our proprietary Rotating Detonation Rocket Engine and Venus Detonation Ramjets deliver historic efficiency and performance across aerospace applications. We are building the next generation of propulsion platforms that enable breakthrough capabilities in space, defense, and commercial high-speed flight. Our team thrives on solving the toughest engineering challenges and pushing the boundaries of what's possible in aerospace. At Venus, we're looking for bold engineers and innovators who want to make history and redefine the future of propulsion.
 
The Role: Instrumentation Engineer
The Instrumentation Engineer is a self-motivated, proactive professional who thrives in a fast-paced environment and communicates effectively across disciplines. This role requires a strong foundation in electrical engineering and instrumentation and offers a unique opportunity to make an immediate and meaningful impact on next-generation aerospace systems.
 
If you are passionate about designing measurement systems for high-energy, one-of-a-kind hardware, you will join a highly experienced team whose background spans large aerospace companies, chemical plants, government organizations, and hands-on engineering environments-united by a culture of ownership, innovation, and technical excellence.
What You'll Get to Do
  • Own the design, analysis, development, integration, and maintenance of test department electrical and instrumentation systems used across a wide range of applications.
  • Play a critical role on a multidisciplinary team responsible for defining how complex aerospace hardware is instrumented, measured, and validated.
  • Select, integrate, and validate sensors for low-speed and high-speed data acquisition systems
  • Perform signal conditioning, including excitation, amplification, filtering, isolation, and scaling of raw sensor outputs
  • Verify correct sensor operation through power checks, continuity, polarity, and calibration
  • Design and fabricate wiring harnesses and instrumentation interfaces
  • Integrate instrumentation with mechanical, fluid, inert gas, and cryogenic systems
  • Develop robust test setups for large- and small-scale hardware
  • Generate and revise electrical and instrumentation schematics for test stands
  • Modify existing structures to meet testing requirements
  • Generate test procedures for new systems and calibration of existing systems
  • Review test data to identify issues, anomalies, and trends
  • Support grounding, shielding, and EMI mitigation efforts
  • Install, wire, and troubleshoot test instrumentation systems
  • Communicate with the Software team to support automated testing and analysis
  • Support commissioning and maintenance of test infrastructure and equipment
  • Perform additional tasks as needed to support test and development operations
What You Have
  • Bachelor's degree in Electrical, Mechanical, Aerospace Engineering, or equivalent hands-on test experience (In absence of a degree, 7+ years of relevant experience)
  • 3+ years of experience in instrumentation, controls, or test engineering
  • Hands-on experience with signal conditioning and data acquisition systems
  • Strong understanding of the following: Measurement uncertainty and sampling theory; Filtering, noise, grounding, and EMI; Sensor selection and integration
  • Solid understanding of sensor signal types and wiring, including: Voltage, mV, differential voltage, and 4-20 mA outputs; Bridge-based sensors; IEPE / charge accelerometers; Digital I/O and low/high-side switching; Thermocouples and RTDs; Pulse and frequency signals
  • Practical experience installing and troubleshooting: Pressure and differential pressure transducers; Thermocouples and RTDs; High-speed accelerometers; Load cells and strain-gauge sensors; Flowmeters; Mechanical limit switches; Solenoid valves; Power supplies; NI PXI, cDAQ, and cRIO systems; VFDs
  • Tools & Equipment Experience: Power supplies; Digital multimeters and signal generators; Oscilloscopes; Crimp tools and precision cutting tools; Soldering and rework equipment; Heat guns and strain relief tools; Torque tools for sensor installation; Labeling and harness management tools
  • Comfort working in a fast-paced, hardware-focused environment
  • Excellent organizational skills, coupled with strong analytical and problem-solving abilities, and the demonstrated capacity to work both independently and collaboratively within cross-functional teams
  • Willingness and ability to work outdoors in support of testing and fabrication activities; safely lift and transport up to 40 pounds; and adapt to evolving test, development, and operational requirements
What Will Set You Apart
  • Experience in aerospace, propulsion testing, or flight test
  • Familiarity with LabVIEW, MATLAB, Python, DIAdem
  • Familiarity with Confluence, Jira, and Microsoft Office Suite
  • Experience with high-speed or transient data acquisition
  • Experience operating in cryogenic or high-temperature environments
  • Background supporting hazardous test operations
  • Strong cross-functional communication during live test operations
  • 3+ years of experience with CAD modeling software
  • 3+ years of experience in hardware testing environments
  • 3+ years of experience with fluid and/or mechanical system design
Location:
On-site in Houston, TX
 
Benefits:
Venus Aerospace employee benefits include a 401(k) plan, stock options, and medical benefits, including dental and vision. We have a flex-Friday flexible schedule, unlimited PTO, and receive professional development opportunities.

ITAR Requirements
This position involves access to technology that is subject to U.S. export controls. Any job offer made will be contingent upon the applicant's capacity to serve in compliance with U.S. export controls. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be able to meet ITAR requirements (U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State). You can learn more about ITAR here.
 
Venus Aerospace is an Equal Opportunity Employer including Disabled/Veterans. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. If you have a disability and believe you need a reasonable accommodation, please email [email protected] or call (281) 203-0027.This email and phone number were created exclusively to assist job seekers whose disability prevents them from being able to apply online. Messages or any other purposes, such as following up on an application, third party staffing agencies, website technical issues, or any other issues not related to a disability, will not receive a response. Messages will be returned within five business days.
 
For additional information about our Equal Opportunity Employment Policy, please visit our EEOP page.
We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.
apply for this job

Apply