ZipRecruiter

Log In

1

Temporary Api 936 Refractory Inspector Jobs in Spring, TX

Burns & McDonnell

Senior Welding Specialist

Houston, TX · On-site

$78K - $108K/yr

API 653 Above ground storage tank, API570 Piping, API 510 Pressure Vessel Inspector or API936 Refractory Inspector preferred. * ASME or CSWIP Plant Inspector qualifications preferred. * ISO 9001:2008 ...

TPC Group Inc.

Maintenance Inspector

Houston, TX · On-site

Perform Temporary Repair Inspections * Inspect and stamp all bundles (new and old) * Develop and ... Holds API 510 and 570 for a minimum of 5 years. * Minimum 10 years inspection field experience in a ...

TPC Group Inc.

Maintenance Inspector

Houston, TX · On-site

Perform Temporary Repair Inspections * Inspect and stamp all bundles (new and old) * Develop and ... Holds API 510 and 570 for a minimum of 5 years. * Minimum 10 years inspection field experience in a ...

TPC Group

Maintenance Inspector

Houston, TX · On-site

Perform Temporary Repair Inspections * Inspect and stamp all bundles (new and old) * Develop and ... Holds API 510 and 570 for a minimum of 5 years. * Minimum 10 years inspection field experience in a ...

TPC Group

Maintenance Inspector

Houston, TX · On-site

Perform Temporary Repair Inspections * Inspect and stamp all bundles (new and old) * Develop and ... Holds API 510 and 570 for a minimum of 5 years. * Minimum 10 years inspection field experience in a ...

Covestro AG

Senior Inspection Specialist

Baytown, TX · On-site

$75K - $103K/yr

Certified API Inspector with at least two of the following: * API 510,570, 653 * 12 years of ... API 580, 571, 577 or 936- AWS CWI certification * ASNT Level III Certifications * NBIC * Experience ...

Covestro

Senior Inspection Specialist

Baytown, TX · On-site

$75K - $103K/yr

Certified API Inspector with at least two of the following: * API 510,570, 653 * 12 years of ... API 580, 571, 577 or 936- AWS CWI certification * ASNT Level III Certifications * NBIC * Experience ...

EnerStaff LLC

QC Inspector

Houston, TX · On-site

QC Inspector (Temp-to-Hire) Location: Houston, TX 77073 (Near IAH) Pay: $18.00/hr+ DOE Shift: Day ... Experienced with API and ISO a plus. * Working independently and as part of a team. * Paying ...

EnerStaff LLC

QC Inspector

Houston, TX · On-site

$18/hr

QC Inspector (Temp-to-Hire) Location: Houston, TX 77073 (Near IAH) Pay: $18.00/hr+ DOE Shift: Day ... Experienced with API and ISO a plus. * Working independently and as part of a team. * Paying ...

Enerstaff

Quality Control Inspector

Houston, TX · On-site

$18/hr

QC Inspector (Temp-to-Hire) Location: Houston, TX 77073 (Near IAH) Pay: $18.00/hr+ DOE Shift ... Experienced with API and ISO a plus. * Working independently and as part of a team. * Paying ...

Enerstaff

Quality Control Inspector

Houston, TX · On-site

$18/hr

QC Inspector (Temp-to-Hire) Location: Houston, TX 77073 (Near IAH) Pay: $18.00/hr+ DOE Shift ... Experienced with API and ISO a plus. * Working independently and as part of a team. * Paying ...

Enerstaff

Quality Control Inspector

Houston, TX

$18/hr

QC Inspector (Temp-to-Hire) Location: Houston, TX 77073 (Near IAH) Pay: $18.00/hr+ DOE Shift ... Experienced with API and ISO a plus. * Working independently and as part of a team. * Paying ...

Carlton Staffing

Weiler Machinist

Houston, TX

$26 - $30/hr

Temp to Hire * Description of Duties: Interpret and execute job orders, blueprints, and technical ... Conduct in-process inspections to ensure dimensional accuracy and quality standards. Perform ...

next page

Showing results 1-20

All JobsApi 936 Refractory Inspector JobsTemporary Api 936 Refractory Inspector JobsTemporary Api 936 Refractory Inspector Jobs in Spring, TX

Temporary Api 936 Refractory Inspector information

What is a Temporary API 936 Refractory Inspector?

Temporary API 936 Refractory Inspectors are professionals hired on a short-term basis to assess and ensure the quality of refractory installations in industrial settings, such as petrochemical plants or refineries. They are certified under the API 936 standard, which sets guidelines for refractory inspection, testing, and qualification. Their primary duties include monitoring installation procedures, verifying material quality, and ensuring compliance with industry standards. These inspectors play a critical role in maintaining equipment safety and performance during maintenance shutdowns or new construction projects.

What are the typical responsibilities and challenges faced by a Temporary API 936 Refractory Inspector on site?

As a Temporary API 936 Refractory Inspector, your main responsibilities include inspecting refractory installations, verifying material conformity, monitoring installation procedures, and documenting compliance with API 936 standards. You'll often work closely with contractors, engineers, and plant management to ensure quality and safety. A common challenge is maintaining strict adherence to project timelines while upholding quality standards in demanding industrial environments. Effective communication and attention to detail are essential for success in this role, especially when addressing non-conformities and ensuring corrective actions are implemented promptly.

What are the key skills and qualifications needed to thrive as a Temporary API 936 Refractory Inspector, and why are they important?

To thrive as a Temporary API 936 Refractory Inspector, you need in-depth knowledge of refractory materials, quality control procedures, and must hold a valid API 936 certification. Familiarity with inspection tools, documentation software, and testing equipment specific to refractory installations is typically required. Strong attention to detail, effective communication, and problem-solving skills help inspectors accurately assess installations and report findings. These competencies are crucial to ensuring refractory work meets industry standards, prevents failures, and supports safe, efficient plant operations.

What are popular job titles related to Temporary Api 936 Refractory Inspector jobs in Spring, TX?

For Temporary Api 936 Refractory Inspector jobs in Spring, TX, the most frequently searched job titles are:

What job categories do people searching Temporary Api 936 Refractory Inspector jobs in Spring, TX look for?

The top searched job categories for Temporary Api 936 Refractory Inspector jobs in Spring, TX are:

What cities near Spring, TX are hiring for Temporary Api 936 Refractory Inspector jobs?

Cities near Spring, TX with the most Temporary Api 936 Refractory Inspector job openings:

Temporary Api 936 Refractory Inspector jobs near you
Infographic showing various Temporary Api 936 Refractory Inspector job openings in Spring, TX as of June 2026, with employment types broken down into 68% Full Time, 14% Part Time, 7% Temporary, and 11% Contract. Highlights an 95% In-person, and 5% Remote job distribution.

Senior Welding Specialist

Burns & McDonnell

Houston, TX • On-site

$78K - $108K/yr

Full-time

Posted 10 days ago

Burns & McDonnell rating

8.4

Company rating: 8.4 out of 10

Based on 51 frontline employees who took The Breakroom Quiz

3rd of 80 rated construction

Job description

Description
The Senior Welding Specialist leads the process to review and approve fabrication process documents, including WPS/PQR, NDE procedures, Post Weld Heat Treatment procedures and ITPs to confirm documents and actual fabrication results meet contract requirements. The Senior Welding Specialist works directly with mechanical, piping and other discipline engineers in the review of special process documents.
  • Approve and ensure accurate project budget estimates and manage project expenditures.
  • Confirm adherence to project budget estimates.
  • Review and verify material and welding procedure submittals for compliance with toughness and Charpy impact requirements in applicable construction codes, including ASME VIII and B31.3.
  • Review and evaluate Supplier Welding Procedure, Procedure Qualification Record and material test reports to ASME IX requirements, and provide technical feedback or required revisions.
  • Respond to technical inquiries and provide subject matter expertise, adjusting priorities and workload as needed to support project and supplier needs.
  • Assess welding procedures and material selections for suitability, identifying metallurgical risks and recommending mitigation strategies.
  • Analyze existing processes, develop specific inspection instructions and assignments and implement procedures to improve supplier quality.
  • Develop and implement guidelines for the establishment of Shop Surveillance Plans (SSPs) and Inspection and Test Plans (ITPs).
  • Develop and implement budget estimation process for submittal review budgets.
  • Lead project and purchase order kickoff meetings with suppliers, clients, and engineers.
  • Lead pre-inspection meetings with inspectors.
  • Validate and approve inspection logs and schedules.
  • Present submittal review reports to the project team(s), vendor and client.
  • Responsible for outstanding actions and the communication of resolution to appropriate parties.
  • Support documentation, review, and resolution of Nonconformance Reports (NCRs).
  • Lead presentations involving lessons learned and develop solution and implement to ensure future success.
  • Problem solve quality issues with clients, suppliers, and project staff (office and field).
  • Lead training for the supplier quality team.
  • Apply API 582 guidelines in the review and approval of welding procedures and fabrication practices to ensure compliance with industry standards.
  • Collaborate with other Welding Engineers and Supplier Quality Specialists.
  • Performs other duties as assigned.
  • Complies with all policies and standards.

Qualifications
  • Bachelor's degree in a welding engineering technology or related field. and 7 year's experience working in the field of quality control or industrial construction and/or equipment manufacturing required.
  • Or, associate degree in a welding technology program, supplier quality program, engineering or related field and 9 year's experience working in the field of quality control industrial construction, and/or equipment manufacturing required.
  • Or, High School Diploma/GED and 11 year's experience working in the field of quality control in industrial construction and/or equipment manufacturing, including hands-on experience in welding, weld training, and NDE required.
  • Knowledge in ASME Boiler & Pressure Vessel Code, Sections II, V & IX.
  • Experience with welding and materials inspection on large construction projects and experience working with an EPC contractor preferred.
  • Experience in qualification and application of weld procedures (WPS), procedure qualification records (PORs), and nondestructive examination (NDE) in accordance with Codes and Standards.
  • Strong understanding of material toughness and Charpy impact requirements for materials and welding procedures as required by the major Construction Codes such as ASME VIII and B31.3.
  • Ability to review and comment on a Supplier's Welding Procedure, Procedure Qualification Record and material test reports to ASME IX essential, supplementary essential, and nonessential variables.
  • Expert with applicable industry's internationally recognized standards and codes.
  • Proficient with Microsoft Office.
  • Competent with basic AI tools.
  • Expert written and verbal communication skills.
  • Ability to communicate in clear, concise, consistent, and code compliant language.
  • Valid driver's license preferred.
  • NDT qualifications such as AWS, CWI, SCWI, CSWIP 3.1 OR 3.2, EWI, EWT, EWE, IIW/EWF Diploma or BGAS preferred.
  • Coating / Painting qualification such as NACE, ICorr, BGAS, Frosio, ICAT preferred.
  • Boiler & Pressure Vessel ASME Authorized Inspector (AI) preferred.
  • API 653 Above ground storage tank, API570 Piping, API 510 Pressure Vessel Inspector or API936 Refractory Inspector preferred.
  • ASME or CSWIP Plant Inspector qualifications preferred.
  • ISO 9001:2008 approved Lead or Principal Auditor preferred.
  • OSHAS 18001 approved lead Auditor preferred.
  • ISO 14001 approved Lead Auditor preferred.
  • Certified ASQ Quality Engineer, Quality Technician or Quality Inspector preferred.
  • HSSE qualifications such as NEBOSH, IOSH, IEMA, NIOSH, OHSAS, NSC or ECITB preferred.
  • API - Source Inspector preferred.

This job posting will remain open a minimum of 72 hours and on an ongoing basis until filled.
EEO/Disabled/Veterans
Job Quality
Primary Location US-MO-Kansas City
Other Locations US-TX-Houston
Schedule: Full-time
Travel: Yes, 25 % of the Time
Req ID: 263730
Job Hire Type Experienced #LI-MF #CDB N/A

What Burns & McDonnell employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Burns & McDonnell logo

About Burns & McDonnell

Sourced by ZipRecruiter

Burns & McDonnell assists clients of all sizes and industries by providing extensive physical services ranging from assessments, integrated security solutions, and large security architecture designs. Services we typically provide include security and safety system design, threat, risk, and vulnerability assessments, security surveys, security master planning, compliance to federal security programs, independent validation and verification of integrated security system operations, management of installation and maintenance, and staff augmentation to develop and implement facility management and protection processes.

Industry

Civil engineering construction

Company size

10,000+ Employees

Headquarters location

Kansas City, MO, US

Year founded

1898

Social media

FacebookTwitter

View All Burns & McDonnell Jobs

Apply