ZipRecruiter

Log In

1

Source Inspection Jobs in Maryland (NOW HIRING)

Primus Aerospace

Quality Inspector

Reisterstown, MD · On-site

$25 - $35/hr

Conduct source inspection support and customer witness inspections when required. Quality Systems and Compliance * Maintain compliance with AS9100 Quality Management System requirements. * Review ...

Primus Aerospace

Quality Inspector

Reisterstown, MD · On-site

$25 - $35/hr

Conduct source inspection support and customer witness inspections when required. Quality Systems and Compliance * Maintain compliance with AS9100 Quality Management System requirements. * Review ...

Primus Aerospace

Quality Inspector

Reisterstown, MD

$25 - $35/hr

Conduct source inspection support and customer witness inspections when required. Quality Systems and Compliance * Maintain compliance with AS9100 Quality Management System requirements. * Review ...

TBest Services, Inc.

Quality Inspector

Reisterstown, MD · On-site

$25 - $35/hr

Develop inspection plans and reports * Review certifications and manufacturing documentation ... Support source inspections, customer witness inspections, and audits * Investigate nonconforming ...

Tbest Services inc

Quality Inspector

Reisterstown, MD · On-site

$25 - $35/hr

Develop inspection plans and reports * Review certifications and manufacturing documentation ... Support source inspections, customer witness inspections, and audits * Investigate nonconforming ...

Mercury Systems

Quality Inspector II

Columbia, MD · On-site

... inspection in a manufacturing environment. * Experience supporting incoming, in-process and final inspections including customer source inspections. * Physically able to spend up to 8 hours a day ...

Mercury Systems

Quality Inspector II

Columbia, MD · On-site

... inspection in a manufacturing environment. * Experience supporting incoming, in-process and final inspections including customer source inspections. * Physically able to spend up to 8 hours a day ...

Maryland Environmental Service

$50K - $75K/yr

... inspection of completed units to ensure compliance. Key responsibilities include completion of site ... funding source requirements and regulations. These positions will also assist managers in the ...

L3HHCM20

Specialist Quality Engineer

Hanover, MD · On-site

$84K - $156K/yr

Support customer inspections, source inspections, witness points, and quality-related program deliverables * Assist with customer audits, data package preparation, and quality documentation ...

next page

Showing results 1-20

All JobsSource Inspection JobsSource Inspection Jobs in Maryland

Source Inspection information

What is the difference between Source Inspection vs Quality Control Inspector?

AspectSource InspectionQuality Control Inspector
CertificationsOften requires certifications like ASQ CQI or specific industry standardsMay require similar certifications, but focus is on inspection procedures
Work EnvironmentConducted at supplier sites or during manufacturing processesPerformed at various stages, including in-house or at production lines
Industry UsageCommon in manufacturing, aerospace, and construction industriesWidely used across manufacturing, automotive, and industrial sectors

Source Inspection focuses on verifying materials and components at the supplier or manufacturing site before delivery, ensuring compliance with specifications. Quality Control Inspectors perform inspections throughout the production process or final product to maintain quality standards. While both roles involve inspection and certifications, Source Inspection emphasizes supplier verification, whereas Quality Control Inspectors focus on ongoing quality assurance during production.

What is source inspection?

Source inspection is a quality assurance process where products or materials are inspected at the supplier's facility before they are shipped to the buyer. This helps to ensure that goods meet specified standards, requirements, and contractual agreements, reducing the risk of defects or non-conformities upon delivery. Source inspections are commonly used in industries like manufacturing, construction, and aerospace to maintain high-quality standards and avoid costly rework or delays.

What are the typical challenges faced by source inspectors, and how can they be addressed?

Professionals in Source Inspection often encounter challenges such as balancing strict adherence to quality standards with production deadlines, managing clear communication between suppliers and internal teams, and keeping up with evolving compliance requirements. To address these, it's vital to maintain organized documentation, proactively clarify specifications with all stakeholders, and stay updated on industry standards. Building strong relationships with suppliers and fostering a collaborative approach can also help mitigate misunderstandings and ensure quality outcomes.

What are the key skills and qualifications needed to thrive as a source inspector?

To thrive as a Source Inspector, you need strong knowledge of quality assurance principles, inspection procedures, and relevant industry standards, often supported by certifications such as ASQ or ISO auditor credentials. Familiarity with inspection tools, measurement devices, and reporting systems like SAP or QMS software is typically required. Attention to detail, integrity, and effective communication are crucial soft skills for accurately evaluating products and collaborating with suppliers. These skills ensure products meet required specifications, prevent costly defects, and maintain customer trust throughout the supply chain.

What are popular job titles related to Source Inspection jobs in Maryland?

For Source Inspection jobs in Maryland, the most frequently searched job titles are:

What job categories do people searching Source Inspection jobs in Maryland look for?

The top searched job categories for Source Inspection jobs in Maryland are:

Source Inspection jobs near you
Infographic showing various Source Inspection job openings in Maryland as of August 2026, with employment types broken down into 1% As Needed, 80% Full Time, 15% Part Time, 2% Contract, and 2% Nights. Highlights an 98% Physical, 1% Hybrid, and 1% Remote job distribution.

Quality Inspector

Primus Aerospace

Reisterstown, MD • On-site

$25 - $35/hr

Full-time

Re-posted 27 days ago

Job description

PRIMUS AEROSPACE
QUALITY INSPECTOR
POSITION SUMMARY
Primus Aerospace is a premier manufacturer of precision-machined components and assemblies serving the Aerospace, Defense, and Space industries. The Quality Inspector is responsible for verifying product conformity throughout the manufacturing process by performing in-process, first article, receiving, and final inspections. This position ensures compliance with customer specifications, engineering drawings, AS9100 requirements, and applicable regulatory standards while supporting continuous improvement initiatives and maintaining the highest level of product quality.
The Quality Inspector serves as a key contributor to product acceptance, risk mitigation, customer satisfaction, and operational excellence.
1st Shift: Mon-Fri 6am-3:30pm
Pay Rate: $25-$35/hr
ESSENTIAL DUTIES AND RESPONSIBILITIES
Inspection and Product Verification
  • Perform Receiving, First Piece, In-Process, First Article, Lot, and Final Inspections in accordance with customer specifications, engineering drawings, purchase orders, and company procedures.
  • Verify product conformity utilizing precision measuring instruments and inspection equipment.
  • Interpret engineering drawings, specifications, customer requirements, and manufacturing documentation.
  • Validate dimensional, visual, and functional requirements of manufactured products.
  • Perform and document AS9102 First Article Inspections (FAIRs).
  • Develop and maintain inspection plans, inspection reports, and quality records.
  • Ensure all inspection documentation is complete, accurate, and maintained in accordance with quality system requirements.
  • Conduct source inspection support and customer witness inspections when required.

Quality Systems and Compliance
  • Maintain compliance with AS9100 Quality Management System requirements.
  • Review work orders, travelers, routers, certifications, and manufacturing records for completeness and accuracy.
  • Verify traceability requirements for raw materials, special processes, and finished products.
  • Review Certificates of Conformance (CoCs), material certifications, and special process certifications.
  • Compile and verify customer-required shipping documentation and quality records.
  • Support internal audits, customer audits, and third-party audits.
  • Assist in maintaining inspection procedures, work instructions, and quality documentation.

Problem Solving and Continuous Improvement
  • Participate in investigations involving nonconforming material and quality escapes.
  • Support Root Cause Corrective Action activities utilizing:
    • 8D Methodology
    • 5 Why Analysis
    • Fishbone (Ishikawa) Diagrams
    • Failure Mode and Effects Analysis (FMEA)
  • Assist with Corrective and Preventive Actions (CAPA).
  • Support customer complaint investigations and Return Material Authorizations (RMAs).
  • Identify opportunities to improve quality, reduce defects, and enhance manufacturing processes.

Measurement Equipment and Calibration
  • Select appropriate inspection equipment based on tolerance requirements and measurement uncertainty.
  • Utilize and maintain proficiency with:
    • Calipers
    • Micrometers
    • Height Gages
    • Bore Gages
    • Indicators
    • Optical Comparators
    • Thread Gages
    • Surface Plates
    • Pin Gages
  • Support calibration activities and ensure equipment remains within calibration requirements.
  • Maintain awareness of measurement system analysis and best inspection practices.

Systems and Administrative Responsibilities
  • Maintain inspection and quality records within ERP and Quality Management Systems.
  • Ensure timely disposition of inspected product to support production schedules and customer delivery requirements.
  • Maintain organized work areas and comply with all safety requirements.
  • Perform additional duties as assigned.

REQUIRED QUALIFICATIONS
  • High School Diploma or GED required.
  • Minimum of 3-5 years of quality inspection experience in a manufacturing environment.
  • Minimum of 3 years of experience performing bench inspections and dimensional inspections.
  • Ability to read and interpret engineering drawings, blueprints, and specifications.
  • Working knowledge of Geometric Dimensioning and Tolerancing (GD&T).
  • Experience performing AS9102 First Article Inspections.
  • Experience using precision measuring instruments and inspection equipment.
  • Strong attention to detail and commitment to quality.
  • Strong verbal and written communication skills.
  • Ability to work independently and manage multiple priorities.
  • Proficiency with Microsoft Office applications including Excel, Word, and Outlook.

PREFERRED QUALIFICATIONS
  • Aerospace or Defense manufacturing experience.
  • Associate degree in Manufacturing, Engineering Technology, Quality Assurance, or related discipline.
  • ASQ Certified Quality Inspector (CQI) certification.
  • Experience with Coordinate Measuring Machines (CMM) and CMM software.
  • Experience with ERP systems in a manufacturing environment.
  • Knowledge of aerospace customer requirements and special process controls.
  • Experience supporting AS9100-certified organizations.

KNOWLEDGE, SKILLS, AND ABILITIES
  • Thorough understanding of AS9100D and AS9102 requirements.
  • Strong knowledge of GD&T principles and inspection methodologies.
  • Knowledge of aerospace manufacturing processes and special processes.
  • Ability to interpret customer specifications and engineering requirements.
  • Strong analytical and problem-solving skills.
  • Ability to identify nonconforming conditions and recommend corrective actions.
  • Excellent organizational and time-management skills.
  • Ability to collaborate effectively across Quality, Engineering, Production, and Supply Chain teams.
  • Commitment to continuous improvement and operational excellence.

PHYSICAL REQUIREMENTS
  • Ability to stand, walk, bend, and sit for extended periods.
  • Ability to lift and carry up to 25 pounds occasionally.
  • Ability to perform repetitive hand and arm movements.
  • Visual acuity sufficient to perform detailed inspections and read engineering drawings.
  • Ability to work in a manufacturing environment with exposure to machine operations, noise, and industrial equipment.

WORK ENVIRONMENT
Work is performed in a manufacturing and inspection environment. Appropriate personal protective equipment (PPE) may be required in designated production areas. Employees are expected to comply with all company safety policies and procedures.
EXPORT CONTROL REQUIREMENT
In compliance with U.S. export control laws and regulations, including ITAR and EAR requirements, applicants must be U.S. Persons as defined by applicable regulations. U.S. Persons include U.S. Citizens, lawful permanent residents, refugees, or asylees.
DISCLAIMER
This job description is intended to describe the general nature and level of work performed by employees assigned to this position. It is not intended to be an exhaustive list of all responsibilities, duties, and qualifications required. Management reserves the right to modify, assign, or reassign duties and responsibilities at any time based on business needs.

Apply