ZipRecruiter

Log In

1

Rework Assembler Jobs (NOW HIRING)

PROLIM Global Corporation

Assembler 2

Plymouth, MN · On-site

$17 - $20.75/hr

Assembler 2 Location: Plymouth, MN Job Type: Contract Work Setting: 100% Onsite Shift: 1st Shift ... Disassemble, modify, rework, repair, and reassemble assemblies and subassemblies as needed

Prolim Global

Assembler 2

Plymouth, MN · On-site

$17 - $20.75/hr

Assembler 2 Location: Plymouth, MN Job Type: Contract Work Setting: 100% Onsite Shift: 1st Shift ... Disassemble, modify, rework, repair, and reassemble assemblies and subassemblies as needed

The Alpha Group

Be Seen First

Assembler

Middleborough, MA · On-site

$18 - $20/hr

... Rework assemblies as needed -Utilize various test equipment and perform preventative maintenance ... Assembler: -Minimum High School Diploma or equivalent -Previous experience in a manufacturing ...

TAD PGS, Inc.

Assembler (1st Shift)

San Diego, CA · On-site

$17 - $21/hr

In addition, the Assembler will assemble and inspect components, parts, subassemblies, and ... Perform any rework from test failures in accordance with standard repair procedures. May also ...

Prolim Global

1343-Assembler 2 @ Plymouth MN

Plymouth, MN · On-site

$17 - $20.75/hr

www.govt.prolim.com Is hiring for federal client Northrup Grumman 1343-Assembler 2 @ Plymouth MN Ca ... Disassemble, modify, rework, reassemble, and test assemblies and subassemblies * Support prototype ...

Prolim Global

Assembler 2

Plymouth, MN · On-site

$17 - $20.75/hr

Assembler 2 Location: Plymouth, MN Job Type: Contract Work Setting: 100% Onsite Shift: 2nd Shift ... Disassemble, modify, rework, repair, and reassemble assemblies and subassemblies as needed

Thorlabs

Assembler - Manufacturing

Sterling, VA · On-site

$18 - $21/hr

Must be able to understand written work instructions and Drawings for a wide range of products to properly assemble the final product to the highest of quality standards and with zero scrap or rework.

PROLIM Global Corporation

Assembler 2

Plymouth, MN · On-site

$17 - $20.75/hr

Assembler 2 Location: Plymouth, MN Job Type: Contract Work Setting: 100% Onsite Shift: 2nd Shift ... Disassemble, modify, rework, repair, and reassemble assemblies and subassemblies as needed

previous page

Showing results 41-60

All JobsManufacturing JobsProduct Manufacturing JobsAssembly Line Worker JobsRework Assembler Jobs

Rework Assembler information

See salary details

$11

$18

$23

How much do rework assembler jobs pay per hour?

As of Aug 23, 2026, the average hourly pay for rework assembler in the United States is $18.18, according to ZipRecruiter salary data. Most workers in this role earn between $16.35 and $20.19 per hour, depending on experience, location, and employer.

What is a rework assembler?

A Rework Assembler is a manufacturing professional responsible for correcting or modifying assembled products that do not meet quality standards or specifications. They disassemble, repair, and reassemble products or components, often using hand tools, power tools, and specialized equipment. Rework Assemblers carefully follow technical instructions and quality guidelines to ensure that all products meet the required standards before they are shipped or used. This role is crucial in maintaining product quality and customer satisfaction in various industries such as electronics, automotive, and aerospace.

What skills and qualifications are needed to thrive as a rework assembler?

To thrive as a Rework Assembler, you need strong manual dexterity, attention to detail, and a basic understanding of assembly processes, often supported by a high school diploma or equivalent. Familiarity with hand tools, soldering equipment, and the ability to read technical drawings or blueprints are typically required. Problem-solving skills, patience, and effective communication help you stand out when addressing assembly errors or collaborating with quality control teams. Mastering these skills ensures accurate rework, minimizes production delays, and upholds product quality standards.

What are common challenges faced by a rework assembler and how can they be managed?

Rework Assemblers often encounter challenges such as handling repetitive tasks, meeting tight deadlines, and ensuring high accuracy when correcting defects in products. To manage these challenges, it’s important to develop strong attention to detail, maintain excellent documentation, and communicate effectively with supervisors and quality control teams. Many employers provide training on proper rework techniques and encourage a collaborative environment, so seeking guidance and sharing best practices with colleagues can also help reduce errors and improve workflow.

What is the difference between Rework Assembler vs Production Assembler?

AspectRework AssemblerProduction Assembler
CertificationsTypically requires basic assembly and quality control trainingRequires similar assembly skills, often with additional certifications for specialized equipment
Work EnvironmentPrimarily in repair, quality control, or correction areasIn manufacturing lines, assembling new products
Industry UsageCommon in electronics, automotive, and appliance repair sectorsWidely used in manufacturing plants across various industries

Rework Assemblers focus on repairing, reworking, or correcting defective products, often working in quality control or repair departments. Production Assemblers build products from scratch on manufacturing lines. While both roles require assembly skills, Rework Assemblers emphasize quality correction, whereas Production Assemblers focus on assembling new products efficiently.

Are rework assembler jobs worth it?

Rework assembler jobs involve repairing or modifying products to meet quality standards, often requiring attention to detail and manual dexterity. These roles can offer steady employment and opportunities for skill development, but wages and job satisfaction vary depending on the industry and location.
More about Rework Assembler jobs

What job categories do people searching Rework Assembler jobs look for?

The top searched job categories for Rework Assembler jobs are:

Rework Assembler jobs near you
Infographic showing various Rework Assembler job openings in the United States as of August 2026, with employment types broken down into 92% Full Time, 1% Part Time, 4% Contract, and 3% Nights. Highlights an 95% Physical, 2% Hybrid, and 3% Remote job distribution, with an average salary of $37,821 per year, or $18.2 per hour.

Assembler - Manufacturing

General Dynamics Ordnance & Tactical Systems

Saco, ME • On-site

$30.21/hr

Full-time

Posted 5 days ago

Job description

Job Summary-
**The hourly rate for this position is $30.21 for 1st shift.
Great company culture and competitive compensation package
We offer benefits day one of hire and do company events for our employees throughout the Year!
The Assembler #1 will assemble components into sub-assemblies and perform final assembly of Aircraft and Crew-served weapons. Perform minor changeovers, maintain set-up and operate a variety of equipment such as arbor and hydraulic straightening presses, paint spray booths, parts washers, etc. Degrease, clean and oil weapon components using various types of chemical cleaners, oils, hot water, etc. Follow established company directives and policies, military specifications, process sheet operations, and instructions.
Responsibilities-
Disassemble and reassemble test fired weapons and components of all crew-served weapons. Ensure appropriate interchange of sub-assembly components through a constant awareness of required tolerance and fit of mating parts. Assist Assembler Specialist(s) or other Assembler #1(s), in training and upgrading skills of employees in the Assembly Department.
Perform rework and final qualifying operations on sub-assemblies and assemblies to comply with stringent internal and government final inspection requirements. Use precision functional gages, alignment and work holding fixtures, pneumatic tools, drill presses, riveters, etc.
Perform fitting and rework tasks, such as grinding, filling, drilling, etc. Blend mismatched and irregular surfaces to final gaging tolerances and perform other fitting and rework tasks. Use hand tools such as pneumatic and hand type abrasive tools, wrenches, screwdrivers, pliers, mallets, etc. Will pay close attention to the class of fit created by processes such as riveting or heat treating that cause warping, shrinkage, etc., as these are problems that effect shrinkage, etc.
Maintain and record weapons data, inventory and serial number identification. Must be constantly aware of security requirements associated with all weapons and adhere to those requirements.
Physical requirements involve the heavy lifting, washing, and degreasing of weapons. Must have physical ability to lift, move, adjust, etc. items weighing approximately 35 lbs. on a production basis. Practice safety and good housekeeping policies and procedures.
  • Must be a qualified Assembler #2 that is knowledgeable and capable of performing all tasks and duties of an Assembler #2. May be required to perform other duties as required by supervision and follows instructions as directed.
  • All employees are expected to be in compliance with government and corporate laws, rules, regulations, policies, and procedures.

Qualifications-
Education, Training, and/or Certifications:
Required:
  • High school diploma or G.E.D. required.

Experience:
Required:
  • Employee must have basic computer skills, and may be required to enter and verify information into written forms or database(s) as appropriate.
  • Average eighteen (18) months. Includes over one (1) year through two (2) years.

Required:
Knowledge:
  • Requires the ability to use a variety of ordinary machine tools and precision measuring instruments.
  • Successful completion of Aircraft Assembly basic classes required.
  • Successful completion of the written and practical test for Assembler #1.
  • Knowledge of general riveting operations is required.

Skills:
  • Excellent blueprint reading skills, shop math skills, and proficiency with a wide variety of precision measuring tools required.
  • Able to be constantly aware of security and foreign object debris hazards.
  • Employee must have basic computer skills, and may be required to enter and verify information into written forms or database(s) as appropriate.

Apply