ZipRecruiter

Log In

2

Remote Trane Controls Technician Jobs in Decatur, GA

DA Carter Services

IT Helpdesk Technician

Conyers, GA · Remote

$70K - $85K/yr

... remote support using RMM tools (e.g., ConnectWise Automate) * Install, configure, and maintain desktop hardware, software, and peripherals * Manage user accounts, permissions, and access controls

All JobsTrane Controls Technician JobsRemote Trane Controls Technician JobsRemote Trane Controls Technician Jobs in Decatur, GA

Remote Trane Controls Technician information

See Decatur, GA salary details

$18

$33

$47

How much do remote trane controls technician jobs pay per hour?

As of Aug 2, 2026, the average hourly pay for remote trane controls technician in Decatur, GA is $33.17, according to ZipRecruiter salary data. Most workers in this role earn between $28.17 and $37.07 per hour, depending on experience, location, and employer.

What is the difference between Remote Trane Controls Technician vs Trane HVAC Service Technician?

AspectRemote Trane Controls TechnicianTrane HVAC Service Technician
CertificationsHVAC certifications, controls system training, Trane-specific certificationsHVAC certifications, EPA certification, manufacturer-specific training
Work EnvironmentRemote diagnostics, office-based, field service for controls systemsOn-site installation, maintenance, repair of HVAC systems
Industry UsageControls system management, building automation, remote troubleshootingHVAC system installation, repair, and maintenance in commercial/residential settings

The Remote Trane Controls Technician primarily focuses on managing and troubleshooting building automation and controls systems remotely, often working from an office or remote location. In contrast, the Trane HVAC Service Technician performs on-site installation, maintenance, and repair of HVAC systems. Both roles require HVAC certifications, but the controls technician emphasizes controls and automation expertise, while the service technician emphasizes hands-on HVAC system skills.

What are the most commonly searched types of Trane Controls Technician jobs in Decatur, GA? The most popular types of Trane Controls Technician jobs in Decatur, GA are:
What job categories do people searching Remote Trane Controls Technician jobs in Decatur, GA look for? The top searched job categories for Remote Trane Controls Technician jobs in Decatur, GA are:
What cities near Decatur, GA are hiring for Remote Trane Controls Technician jobs? Cities near Decatur, GA with the most Remote Trane Controls Technician job openings:
Remote Trane Controls Technician jobs near you

Mechanical Engineer - Aviation & Federal (Atlanta)

Burns & McDonnell

Atlanta, GA • On-site, Remote

Full-time

Re-posted 19 days ago

Burns & McDonnell rating

8.7

Company rating: 8.7 out of 10

Based on 50 frontline employees who took The Breakroom Quiz

3rd of 80 rated construction

Job description

Imagine having an ownership stake in the company where you work. Founded in 1898, Burns & McDonnell is an award-winning firm specializing in engineering, architecture, construction, environmental, and consulting services. Our global projects are driven by a singular mission: to make our clients successful. Locally, regionally, and nationally, we're recognized as a Best Place to Work. As a 100% employee-owned company, we've cultivated a culture where everyone is personally invested in project outcomes and client satisfaction. Our employee-owners embrace an ownership mindset, working diligently and intelligently to benefit our clients and enhance our communities. While we offer flexible work options, including 6 weeks of remote work, flexible daily schedules, and 9/80 work schedules, our commitment to success keeps our employee-owners engaged in the office. At Burns & McDonnell, hard work and entrepreneurial spirit lead to success for our clients, communities, and individual wealth. We truly are owners.
 
The Mechanical Engineer will work on project teams to create world class designs for new projects, alterations, and renovations on a variety of HVAC and plumbing projects primarily for aviation, government, and military facilities. The Mechanical Engineer will work with the project team throughout the design and construction process, developing HVAC and plumbing designs according to budget constraints, design factors, or client needs.
 
Essential functions include, but are not limited to the following:
  • Research and compile project related data as required by the project managers.
  • Applies strong knowledge of commonly used mechanical engineering/design concepts, principles, practices, codes, and procedures within the mechanical engineering services industry.
  • Design HVAC and plumbing components for project needs and requirements that are set forth by the project managers.
  • Design HVAC and plumbing systems for projects from the conceptual phase through design completion, covering various HVAC and plumbing systems: air-side/duct design, chilled and condenser water, heating hot water, steam, HVAC controls, domestic water, sanitary waste and vent and compressed gases.
  • Lead development of design documents and update drawings provided by senior engineers to verify corrections are made within Revit and other CAD related software.
  • Compiles information for client presentations, shop drawing review, and contract administration for design projects.
  • Demonstrates understanding of, and effectively applies, federal design standards such as the Unified Facilities Criteria (UFC) and Unified Facilities Guide Specifications (UFGS) in project planning and design.
  • Lead and perform HVAC load calculation and energy modeling calculations and life cycle cost analyses (LCCA) with IES-VE or similar software (Trane Trace 700, Trane Trace 3D Plus, etc).
  • Modify and review production drawings for a variety of projects primarily focusing on aviation, government, and military facilities but also including power plants, industrial, life science, and commercial facilities.
  • Performs field inspections, measurements or calculations for public and private clients.
  • Complies with all policies and standards.
  • Performs other duties as assigned.
  • Bachelor's Degree in Mechanical Engineering or related degree from an ABET-accredited program, and 3 years of mechanical engineering experience required.Plumbing and HVAC experience preferred. OR
  • Bachelor Degree in Mechanical or related Engineering Technology from an ABET accredited program and successful completion of Fundamentals of Engineering (FE) exam and 3 years of mechanical engineering experience. Plumbing and HVAC experience preferred. OR
  • Master's Degree in Mechanical Engineering and 2 years of mechanical engineering experience required. Plumbing and HVAC experience preferred.
  • 4 years of Mechanical Engineering and Plumbing and HVAC experience preferred.
  • Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrated critical thinking skills.
  • Excellent written and verbal communication skills.
  • Proficient in standard engineering techniques and procedures.
  • Strong attention to detail, facilitation, team building, collaboration, organization, and problem-solving skills.
  • Strong knowledge in standard engineering techniques and procedures.
  • Strong operating knowledge of and experience using Revit is preferred. AutoCAD and MicroStation experience is a plus.
  • Strong operating knowledge of and experience with load calculations and energy modeling in IES-VE, Trane Trace 700, or Trane Trace 3D Plus is preferred. Other software such as Carrier HAP, Energy Pro, etc. may be considered.
  • Experience with AFT Fathom, Elite Ductsize, or Bently AutoPIPE is a plus.
  • Strong computer skills (e.g. Microsoft Office Suite) in writing of design reports, design calculations, and presentations.
  • Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.

  • Professional Engineer (PE) License is preferred, Engineer in Training (EIT) Certification may be considered.

    EEO/Disabled/Veterans
     

What Burns & McDonnell employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Burns & McDonnell logo

About Burns & McDonnell

Sourced by ZipRecruiter

Burns & McDonnell assists clients of all sizes and industries by providing extensive physical services ranging from assessments, integrated security solutions, and large security architecture designs. Services we typically provide include security and safety system design, threat, risk, and vulnerability assessments, security surveys, security master planning, compliance to federal security programs, independent validation and verification of integrated security system operations, management of installation and maintenance, and staff augmentation to develop and implement facility management and protection processes.

Industry

Civil engineering construction

Company size

10,000+ Employees

Headquarters location

Kansas City, MO, US

Year founded

1898

Social media

FacebookTwitter

View All Burns & McDonnell Jobs

Apply