ZipRecruiter

Log In

1

Quality Inspector Jobs in Riverview, FL (NOW HIRING)

Pilatus Aircraft

Senior Quality Inspector

Sarasota, FL · On-site

$37.55 - $52.42/hr

Learns and applies Pilatus inspection methods, quality gates, and best practices during the Switzerland training assignment * Captures inspection knowledge and lessons learned and integrates them ...

AEVEX

Quality Control Inspector 2

Tampa, FL · On-site

Job Overview The Quality Control Inspector 2 is responsible for assisting with ensuring the integrity, safety, and compliance of unmanned aerial systems (UAS) and sub-systems. Operating within a ...

AEVEX

Quality Control Inspector 2

Tampa, FL · On-site

Job Overview The Quality Control Inspector 2 is responsible for assisting with ensuring the integrity, safety, and compliance of unmanned aerial systems (UAS) and sub-systems. Operating within a ...

AEVEX

Quality Control Inspector 2

Tampa, FL

Job Overview The Quality Control Inspector 2 is responsible for assisting with ensuring the integrity, safety, and compliance of unmanned aerial systems (UAS) and sub-systems. Operating within a ...

previous pagenext page

Showing results 21-40

All JobsQuality Inspector JobsQuality Inspector Jobs in Riverview, FL

Quality Inspector information

See Riverview, FL salary details

$10

$18

$28

How much do quality inspector jobs pay per hour?

As of Aug 16, 2026, the average hourly pay for quality inspector in Riverview, FL is $18.19, according to ZipRecruiter salary data. Most workers in this role earn between $14.38 and $20.58 per hour, depending on experience, location, and employer.

What is the difference between Quality Inspector vs Quality Control Technician?

AspectQuality InspectorQuality Control Technician
CertificationsISO 9001, ASQ certificationsISO 9001, ASQ certifications
Work EnvironmentManufacturing plants, labsManufacturing facilities, labs
Employer & Industry UsageManufacturing, aerospace, automotiveManufacturing, electronics, pharmaceuticals
Primary FocusInspecting products for defects, ensuring standardsPerforming tests, measuring quality parameters

Both roles involve quality assurance in manufacturing settings and often require similar certifications. However, Quality Inspectors primarily focus on visual and dimensional inspection of products, while Quality Control Technicians perform testing and measurements to verify quality standards. Understanding these differences helps employers and job seekers identify the right role based on skills and responsibilities.

What are the key skills and qualifications needed to thrive as a quality inspector?

To thrive as a Quality Inspector, you need strong attention to detail, knowledge of quality standards, and experience with inspection techniques, often supported by a high school diploma or technical certification. Familiarity with measurement tools such as calipers, micrometers, and quality management systems (QMS) like ISO 9001 is essential. Excellent problem-solving skills, effective communication, and a commitment to teamwork are valuable soft skills in this role. These qualifications ensure products consistently meet safety and regulatory standards, minimizing defects and supporting operational excellence.

How much do quality inspectors earn?

Quality inspectors typically earn between $35,000 and $60,000 annually, depending on experience, industry, and location. Entry-level inspectors may start at lower wages, while those with specialized skills or certifications can earn higher salaries. Many inspectors work full-time, often in manufacturing, construction, or healthcare environments, and may require knowledge of inspection tools and standards.

What does a quality inspector do?

A Quality Inspector is responsible for examining products and materials for defects or deviations from specifications. They use various measuring tools and testing procedures to ensure that items meet required quality standards before they reach customers. Quality Inspectors document their findings, report issues to supervisors, and may recommend improvements to production processes. Their role is essential in maintaining product safety, reliability, and customer satisfaction.

How does a quality inspector typically collaborate with production and engineering teams to resolve quality issues?

Quality Inspectors work closely with production and engineering teams to identify, document, and address quality concerns as they arise. When an issue is detected, inspectors provide detailed reports and may participate in root cause analysis meetings with engineers and production supervisors. Their insights help implement corrective actions and prevent recurrence, ensuring that all products meet the required standards. This collaborative environment promotes continuous improvement and fosters strong communication between departments.

What is the work of a quality inspector?

A quality inspector examines products or materials to ensure they meet specified standards and quality requirements. They perform inspections using tools like calipers or gauges, document findings, and may recommend corrective actions to prevent defects. This role often requires attention to detail and knowledge of quality control procedures and standards.
More about Quality Inspector jobs

What job categories do people searching Quality Inspector jobs in Riverview, FL look for?

The top searched job categories for Quality Inspector jobs in Riverview, FL are:

What cities near Riverview, FL are hiring for Quality Inspector jobs?

Cities near Riverview, FL with the most Quality Inspector job openings:

Quality Inspector jobs near you
Infographic showing various Quality Inspector job openings in Riverview, FL as of August 2026, with employment types broken down into 1% As Needed, 84% Full Time, 11% Part Time, 3% Contract, and 1% Nights. Highlights an 94% Physical, 2% Hybrid, and 4% Remote job distribution, with an average salary of $37,832 per year, or $18.2 per hour.

Quality Inspector (Electronics Manufacturing)

Custom Manufacturing and Engineering

Pinellas Park, FL • On-site

$21 - $24/hr

Full-time

Posted 10 days ago

Job description

The Opportunity
Custom Manufacturing & Engineering (CME) is seeking a Quality Inspector to ensure electronic assemblies, wire harnesses, mechanical assemblies, machined parts, and finished products meet engineering requirements, customer specifications, and CME quality standards.
This is a hands-on role for someone with a strong eye for detail who takes pride in ensuring products are built right.
What You Will Do
  • Perform visual and microscopic inspections of PCB/circuit card assemblies (CCAs), wire harnesses, box builds, mechanical assemblies, machined parts, and finished products
  • Inspect workmanship to IPC-A-610 and IPC/WHMA-A-620 standards, drawings, specifications, and work instructions
  • Perform incoming, in-process, first article, and final inspections
  • Verify product requirements using calipers, multimeters, and other inspection/test equipment
  • Read and interpret drawings, schematics, specifications, and manufacturing instructions
  • Document inspection results and create Nonconformance Reports (NCRs)
  • Identify and control nonconforming material through Material Review Board (MRB) processes
  • Support Supplier Corrective Action Requests (SCARs) and root-cause investigations
  • Work with manufacturing, engineering, quality, and suppliers to resolve quality issues
  • Maintain accurate inspection and quality records

What You Bring
  • 1-3 years of quality inspection experience in electronics or manufacturing
  • Experience inspecting PCB/CCAs, wire harnesses, electro-mechanical assemblies, or similar products
  • Ability to read and interpret engineering drawings, schematics, and specifications
  • Strong visual acuity, attention to detail, and ability to inspect using magnification
  • Familiarity with measurement and test equipment such as calipers and multimeters
  • Basic computer skills for inspection records, ERP systems, and technical documentation
  • IPC-A-610 and/or IPC/WHMA-A-620 certification strongly preferred

Why CME?
  • Support products used in aerospace, defense, industrial, and energy markets
  • Work directly with manufacturing and engineering on mission-critical hardware
  • Grow your skills in electronics and electro-mechanical manufacturing
  • Enjoy a 4-day workweek most weeks
  • Build your career with an established Tampa Bay engineering and manufacturing company

Hiring Process Note
As part of our selection process, candidates who advance will be asked to complete the Predictive Index Cognitive and Behavioral Assessments. These tools help ensure strong role alignment and long-term success for both the employee and the company.
Eligibility Notice
This position requires access to controlled goods and technologies under ITAR and EAR regulations. Candidates must meet U.S. Person requirements, including U.S. citizen, permanent resident, refugee, or asylee status. Employment eligibility will be verified through E-Verify.
About CME
Custom Manufacturing & Engineering Inc. is a 29-year award winning Tampa Bay small business that designs and manufactures custom engineered and build to print products and systems supporting aerospace, defense, industrial, and energy applications worldwide. We operate on the EOS system and maintain a strong culture of accountability, continuous improvement, and teamwork.
Equal Opportunity Employment
CME is an Equal Opportunity Employer. All employment decisions are made without regard to any protected status under federal or Florida law, including race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other legally protected characteristic.

Apply