ZipRecruiter

Log In

1

Pc Board Inspector Jobs (NOW HIRING)

Moog, Inc.

Quality Assurance Inspector

Mineral Wells, TX · On-site

$17 - $23/hr

Inspect PC boards using microscope to verify correct components and solder of component connections. * When authorized, Issue Authorized Release Documents (FAA Form 8130-3) and required training.

K2 Staffing, LLC

Circuit Board Assembler

Carlsbad, CA

$22 - $25/hr

Summary We are seeking a detail-oriented PC Associate to support circuit board assembly and ... Perform visual inspections of PCBs to ensure quality and accuracy * Review and follow Standard ...

Elemaster USA

Be Seen First

PCB Test Technician - 1st Shift

Duluth, GA · On-site

$20 - $24/hr

The PC Board Test Technician will be based in Duluth, Ga, and is responsible for installing and ... Maintain and program AOI inspection station. * Maintain and debug flying probe tester. Requirements ...

K2 Staffing

Circuit Board Assembler

Carlsbad, CA · On-site

$17.75 - $24/hr

Summary We are seeking a detail-oriented PC Associate to support circuit board assembly and ... Perform visual inspections of PCBs to ensure quality and accuracy * Review and follow Standard ...

Moog, Inc.

$17 - $23/hr

Inspect PC boards using microscope to verify correct components and solder of component connections. * When authorized, Issue Authorized Release Documents (FAA Form 8130-3) and required training.

Moog, Inc.

$17 - $23/hr

Inspect PC boards using microscope to verify correct components and solder of component connections. * When authorized, Issue Authorized Release Documents (FAA Form 8130-3) and required training.

B&B Airparts, Inc.

FAI Inspector

Wichita, KS · On-site

$18 - $25/hr

Excellent PC skills utilizing ERP systems (MAPICS) MS Office, Excel, Access, Word, and Visio ... Participates as an active member of the Material Review Board, which includes dispositioning non ...

Eaton

Tester - 1st Shift

Glenolden, PA · On-site

$26.50/hr

Inspect and diagnose PC Boards to component level (for failure analysis) Work from work orders, engineering drawings, and visual/written work instructions to assemble electro- mechanical components.

Marshall Mfg Co

Quality Inspector

Minneapolis, MN · On-site

$21 - $35/hr

Program & Operate CMM (PC-DMIS Software) * Understanding of Quality Control Plans * Practical ... PCB Components (Printed Circuit Board Components) * Surface Mount Re-work * Fine-Pitch Soldering

previous page

Showing results 41-60

All JobsTechnology JobsDesktop Support JobsComputer Operator JobsPc Board Inspector Jobs

Pc Board Inspector information

What cities are hiring for Pc Board Inspector jobs?

Cities with the most Pc Board Inspector job openings:

What states have the most Pc Board Inspector jobs?

States with the most job openings for Pc Board Inspector jobs include:

What are popular job titles related to Pc Board Inspector jobs?

For Pc Board Inspector jobs, the most frequently searched job titles are:

Infographic showing various Pc Board Inspector job openings in the United States as of July 2026, with employment types broken down into 1% Locum Tenens, 1% As Needed, 80% Full Time, 16% Part Time, and 2% Contract. Highlights an 94% Physical, 2% Hybrid, and 4% Remote job distribution.

Quality Assurance Inspector

Mineral Wells, TX • On-site

Moog, Inc.
Aviation • 10K+ employees
Learn more about Moog, Inc.external

$17 - $23/hr

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Posted 26 days ago

Moog Inc. rating

7.7

Company rating: 7.7 out of 10

Based on 62 frontline employees who took The Breakroom Quiz

229th of 499 rated machine equipment manufacturers

Job description

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work.
Job Title:
Quality Assurance Inspector
Reporting To:
Management, Quality Assurance
Work Schedule:
Onsite - Mineral Wells, TX
Candidates must be authorized to work for any employer in the United States.
To be considered for Quality Assurance Inspector, here's what you'll need to bring with you:
  • High School diploma or General Education Degree. Some college courses desirable; or equivalent combination of education and experience.
  • Must possess general working knowledge of personal computers and related software (Microsoft Access, Excel, and Word).
  • Familiarity with calipers, micrometers, scales, various rulers, and other such mechanical measuring devices.
  • Must be a U.S. citizen.

As a Quality Assurance Inspector you will:
  • Obtain parts and accompanying Purchase Order (P.O.) and Receiving Inspection Test Record (RITR) and inspects material using RITR requirements and drawings.
  • Complete appropriate paperwork, including Receiving Report, and Non-Conformance Reports (NCR's) for discrepant material.
  • Process accepted parts to stores and rejected parts to Material Review Board (MRB) area.
  • Verify P.O.'s, certifications and packing slips for conformance to Procurement Quality Requirements.
  • Ensure that all equipment used is within the calibration schedule.
  • Work from drawings and blueprints where general information is verified, performs basic daily filing duties of Incoming Inspection's Receiving Inspection Test Records (RITRs).
  • Inspect raw materials, vendor standard parts, and assemblies per applicable drawings and company or customer specifications.
  • Inspect complex parts and parts having close tolerances, utilizing surface plate set-ups and written instruction where available.
  • Verify Source Inspected parts that require minimal inspection.
  • Perform First Articles.
  • Check electrical products using volt/ohmmeters and power supplies.
  • Perform acceptance inspection.
  • Analyze and define discrepancies.
  • Inspect materials involving compound angles or three-dimensional projections using inspection techniques relative to surface plate inspection.
  • Perform receipt of material/parts entering Incoming QC inspection area. Material/parts are numerically stored on the Incoming Inspection shelves to await their selection for the inspection process.
  • Inspect PC boards using microscope to verify correct components and solder of component connections.
  • When authorized, Issue Authorized Release Documents (FAA Form 8130-3) and required training.
  • Accurately complete daily material/part receipt activities into the facility.

How We Care for You:
  • Financial Rewards: great compensation package, annual profit sharing, matching 401k and the ability to participate in Employee Stock Purchase Plan, Flexible Spending and Health Savings Accounts
  • Work/Life Balance: Flexible paid time off, holidays and parental leave program
  • Health & Welfare: Comprehensive insurance coverage including medical, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages
  • Professional Skills Development: Tuition Assistance, mentorship and coaching opportunities, leadership development and other personal growth programs
  • Diverse and Inclusive Workplace: Employee Resource Groups, cultural events and celebrations
  • Schedule: Monday - Thursday, 10 hour shifts. Daily schedule is 6:30am-5pm.

Salary Range Transparency:
Mineral Wells, TX $17.00-$23.00 Hourly
Salary Range Disclaimer
The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits.
This position requires access to U.S. export-controlled information.
EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran
Moog offers an exclusive workplace, and, as such, affirms the right of every person to participate in all aspects of employment based on merit without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787.
No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

What Moog Inc. employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Moog logo

About Moog

Sourced by ZipRecruiter

Founded in 1951 with the invention of the servo valve by Bill Moog, a breakthrough in motion control systems, Moog Inc. (NYSE: MOG.A and MOG.B) has evolved into a global leader in motion control parts and systems. Headquartered in East Aurora, NY, we serve customers in over 90 countries, with operations spanning more than 27 countries and a dedicated workforce of nearly 13,000 professionals. Our organization comprises three operating groups: Aircraft, Industrial, and Space and Defense. Our high-performance systems drive military and commercial aircraft, satellites, launch vehicles, missiles, industrial machinery, marine, and medical equipment. At Moog, our focus lies in crafting high-performance solutions to solve the most challenging technical problems for our customers. Beyond technical prowess, Moog fosters a performance culture empowering employees to achieve greatness. Our team thrives on tackling engaging technical challenges within a culture of trust, offering rewarding job experiences and a fulfilling work-life balance.

Industry

Aviation

Company size

10,000+ Employees

Headquarters location

East Aurora, NY, US

Year founded

1951

Social media

FacebookTwitter

View All Moog Jobs

Apply