This is a part-time (adjunct) faculty position. Candidates will be interviewed and hired on an as ... design, PLC, and embedded software programming. Assists with course development and ...
This is a part-time (adjunct) faculty position. Candidates will be interviewed and hired on an as ... design, PLC, and embedded software programming. Assists with course development and ...
Systems Engineer Co-op - Fall 2026
Aurora, OH · On-site
$24/hr
... or part time engineer may assist. Percentages represent the tasks relative effort but will vary ... Configure DDC, PLC and/or DCS control algorithms * Draft system documentation from templates ...
Systems Engineer Co-op - Fall 2026
Aurora, OH · On-site
$24/hr
... or part time engineer may assist. Percentages represent the tasks relative effort but will vary ... Configure DDC, PLC and/or DCS control algorithms * Draft system documentation from templates ...
Instrumentation and Controls Engineer - EIT
Cleveland, OH · On-site
$67K - $94K/yr
Programming experience (Microprocessor, PLC, C++, SQL structures, etc.) is desirable Additional ... Regular full-time and part-time employees (working at least 20 hours per week) have access to ...
Instrumentation and Controls Engineer - EIT
Cleveland, OH · On-site
$67K - $94K/yr
Programming experience (Microprocessor, PLC, C++, SQL structures, etc.) is desirable Additional ... Regular full-time and part-time employees (working at least 20 hours per week) have access to ...
This is a Part-Time opportunity. Our Operating Room Support Specialists help to make a positive ... and programming assistance, so communication is an essential part of this job. The underlying ...
This is a Part-Time opportunity. Our Operating Room Support Specialists help to make a positive ... and programming assistance, so communication is an essential part of this job. The underlying ...
ADVANCED TECHNOLOGIES INSTRUCTOR
$62K - $77K/yr
Attaching a resume does not substitute for completion of the application form. * Part-time work ... programmable logic controller (PLC's), and mechatronics. * Valid driver's license. The educational ...
ADVANCED TECHNOLOGIES INSTRUCTOR
$62K - $77K/yr
Attaching a resume does not substitute for completion of the application form. * Part-time work ... programmable logic controller (PLC's), and mechatronics. * Valid driver's license. The educational ...
Part Time Plc Programming information
See Cleveland, OH salary details
$39.3K - $45.6K
1% of jobs
$45.6K - $51.9K
3% of jobs
$51.9K - $58.2K
5% of jobs
$58.2K - $64.5K
12% of jobs
$66.2K is the 25th percentile. Wages below this are outliers.
$64.5K - $70.8K
14% of jobs
The median wage is $77.1K / yr.
$70.8K - $77.1K
15% of jobs
$77.1K - $83.4K
18% of jobs
$87.5K is the 75th percentile. Wages above this are outliers.
$83.4K - $89.7K
11% of jobs
$89.7K - $96K
12% of jobs
$96K - $102.3K
6% of jobs
$102.3K - $108.6K
3% of jobs
$39.3K
$78.2K
$108.6K
How much do part time plc programming jobs pay per year?
As of Aug 30, 2026, the average yearly pay for part time plc programming in Cleveland, OH is $78,230.00, according to ZipRecruiter salary data. Most workers in this role earn between $65,900.00 and $89,700.00 per year, depending on experience, location, and employer.
What is a part time PLC programmer?
A Part Time PLC Programmer is a professional who works on a part-time basis to design, write, test, and maintain programs for Programmable Logic Controllers (PLCs), which are used to automate industrial processes. These programmers are responsible for ensuring that automated machinery and systems operate efficiently and safely. They often work with manufacturing companies, system integrators, or engineering firms, and their duties may also include troubleshooting and upgrading existing PLC systems. Part-time roles allow flexibility for both the employer and the programmer, making it suitable for those seeking work-life balance or supplementary income.
What are the typical responsibilities and challenges faced by part time PLC programmers in industrial settings?
Part-time PLC programmers are often tasked with troubleshooting, modifying, and updating programmable logic controller (PLC) code to support ongoing operations or small-scale automation projects. A common challenge is efficiently managing time while juggling multiple tasks, as part-time roles may require rapid adaptation to different systems or urgent maintenance requests. Collaboration with full-time engineers, maintenance teams, and machine operators is frequent, ensuring that any changes to PLC logic align with safety and production requirements. This role can provide valuable exposure to diverse equipment and processes, which can be beneficial for career growth into full-time automation or controls engineering positions.
What are the key skills and qualifications needed to thrive as a part time PLC programmer, and why are they important?
To excel as a Part-Time PLC Programmer, you need a solid background in electrical engineering or automation, experience with PLC logic, and knowledge of industrial control systems. Familiarity with programming languages such as ladder logic, and tools like Siemens, Allen-Bradley, or Mitsubishi PLC software, is typically required. Strong problem-solving abilities, attention to detail, and effective communication help you troubleshoot issues and collaborate with team members. These skills and qualities are crucial for ensuring reliable, efficient automation solutions in diverse industrial environments.
What is the difference between Part Time Plc Programming vs Part Time Automation Technician?
| Aspect | Part Time Plc Programming | Part Time Automation Technician |
|---|---|---|
| Credentials | Basic PLC programming certifications, technical diploma | Technical diploma or certification in automation or electrical systems |
| Work Environment | Manufacturing plants, industrial settings, control rooms | Factories, industrial facilities, maintenance environments |
| Industry Usage | Designing and programming PLC systems for automation | Maintaining, troubleshooting, and installing automation equipment |
Part Time Plc Programming focuses on creating and modifying PLC code to automate processes, while Part Time Automation Technicians handle the installation, maintenance, and troubleshooting of automation systems. Both roles require technical knowledge but differ in scope and daily tasks.
What are the most commonly searched types of Plc Programming jobs in Cleveland, OH?
The most popular types of Plc Programming jobs in Cleveland, OH are:
What are popular job titles related to Part Time Plc Programming jobs in Cleveland, OH?
For Part Time Plc Programming jobs in Cleveland, OH, the most frequently searched job titles are:
What job categories do people searching Part Time Plc Programming jobs in Cleveland, OH look for?
The top searched job categories for Part Time Plc Programming jobs in Cleveland, OH are:
$942/wk
Part-time
Re-posted 22 days ago
Job description
Adjunct Faculty, Electrical/Electronic Engineering Technology
Special Note: This is a part-time (adjunct) faculty position. Candidates will be interviewed and hired on an as-needed basis throughout the academic year.
Department: Advanced Manufacturing & Computer Science
Location: College-Wide
Reports To: Associate Dean
Recruitment Type: External/Internal
Requisition ID: req7049
Employment Type: Part-Time Faculty
Union Position: Non-Union
Work Schedule: To be determined based on business unit needs. Classes may be offered during the day, evening and/or weekend. Please indicate your availability when applying for this position.
Job Description:
Description:
Required Qualifications:
Preferred Qualifications:
In order to be considered for an Adjunct faculty position, these additional documents are required to be uploaded: Unofficial transcript & license/certifications (Based on requirements outlined in posting).
Special Note: This is a Part-Time Faculty position, with the following set rate of pay: $942.00/Equated Semester Unit (ESU)
Special Instructions to Applicants: During the application process, you may be required to attach a cover letter and/or resume. It is recommended that you have these documents ready to be attached electronically to the online application. This system accepts only MS Word or PDF attachments. Any employment with the College is contingent upon satisfactory completion of a background check.
Adjunct only: If hired, you must reside in the state of Ohio and be within commuting distance of this work location/campus to respond to onsite work demands from your employment start date and throughout the duration of your employment with the College, as outlined inAdjunct Faculty, Electrical/Electronic Engineering Technology
Special Note: This is a part-time (adjunct) faculty position. Candidates will be interviewed and hired on an as-needed basis throughout the academic year.
Department: Advanced Manufacturing & Computer Science
Location: College-Wide
Reports To: Associate Dean
Recruitment Type: External/Internal
Requisition ID: req7049
Employment Type: Part-Time Faculty
Union Position: Non-Union
Work Schedule: To be determined based on business unit needs. Classes may be offered during the day, evening and/or weekend. Please indicate your availability when applying for this position.
Job Description:
Description:
Required Qualifications:
Preferred Qualifications:
In order to be considered for an Adjunct faculty position, these additional documents are required to be uploaded: Unofficial transcript & license/certifications (Based on requirements outlined in posting).
Special Instructions to Applicants: During the application process, you may be required to attach a cover letter and/or resume. It is recommended that you have these documents ready to be attached electronically to the online application. This system accepts only MS Word or PDF attachments. Any employment with the College is contingent upon satisfactory completion of a background check and drug screen.
Adjunct only: If hired, you must reside in the state of Ohio and be within commuting distance of this work location/campus to respond to onsite work demands from your employment start date and throughout the duration of your employment with the College, as outlined in 3354:1-40-01.2 Adjunct Faculty Hiring and Employment Procedure.
Affirmative Action Statement: Cuyahoga Community College is committed to attaining excellence through the recruitment and retention of a qualified and diverse workforce. Cuyahoga Community College is an equal employment/educational opportunity institution.
"> 3354:1-40-01.2 Adjunct Faculty Hiring and Employment Procedure.
Equal Opportunity Statement: Cuyahoga Community College is committed to attaining excellence through the recruitment and retention of a qualified workforce. Cuyahoga Community College is an equal employment/educational opportunity institution.
Special Note: This is a part-time (adjunct) faculty position. Candidates will be interviewed and hired on an as-needed basis throughout the academic year.
Department: Advanced Manufacturing & Computer Science
Location: College-Wide
Reports To: Associate Dean
Recruitment Type: External/Internal
Requisition ID: req7049
Employment Type: Part-Time Faculty
Union Position: Non-Union
Work Schedule: To be determined based on business unit needs. Classes may be offered during the day, evening and/or weekend. Please indicate your availability when applying for this position.
Job Description:
Description:
- Teaches a full rangeof Electrical Engineering Technology (EET) lecture and lab courses. Courses include, but are not limited to,analog electronics, digital electronics, power electronics, printed circuitboard layout design, PLC, and embedded software programming. Assists with course development and tutoringstudents in EET courses as needed. Performs student learning outcome assessment to make continuousimprovement.
- Prepares and delivers learning activities in order to achieve course outcomes
- Prepares course materials such as syllabi, homework assignments and handouts
- Evaluates and grades students' class work, laboratory work, assignments, papers, and examinations
- Maintains and submits student attendance records, grades and other required documentation by specified deadlines
- Be available to students for coaching
- Periodic meetings with supervisors, division, or College, relative to teaching duties and training and development
Required Qualifications:
- Bachelor's degree in Electrical Engineering or Electrical Engineering Technology
- Knowledge and/or experience in basic analog/digital electronics theories and lab applications
- Demonstrated proficiency in Microsoft Office Suite (or equivalent)
- Advanced communication (verbal, written and interpersonal) and organizational skills
- Appropriately responds to the needs of the community
Preferred Qualifications:
- Master's degree in Electrical Engineering or Electrical Engineering Technology
- Teaching experience
- Some industry experiences
- Experience in surface mount soldering
- Hands-on experience with robots and drones
In order to be considered for an Adjunct faculty position, these additional documents are required to be uploaded: Unofficial transcript & license/certifications (Based on requirements outlined in posting).
Special Note: This is a Part-Time Faculty position, with the following set rate of pay: $942.00/Equated Semester Unit (ESU)
Special Instructions to Applicants: During the application process, you may be required to attach a cover letter and/or resume. It is recommended that you have these documents ready to be attached electronically to the online application. This system accepts only MS Word or PDF attachments. Any employment with the College is contingent upon satisfactory completion of a background check.
Adjunct only: If hired, you must reside in the state of Ohio and be within commuting distance of this work location/campus to respond to onsite work demands from your employment start date and throughout the duration of your employment with the College, as outlined inAdjunct Faculty, Electrical/Electronic Engineering Technology
Special Note: This is a part-time (adjunct) faculty position. Candidates will be interviewed and hired on an as-needed basis throughout the academic year.
Department: Advanced Manufacturing & Computer Science
Location: College-Wide
Reports To: Associate Dean
Recruitment Type: External/Internal
Requisition ID: req7049
Employment Type: Part-Time Faculty
Union Position: Non-Union
Work Schedule: To be determined based on business unit needs. Classes may be offered during the day, evening and/or weekend. Please indicate your availability when applying for this position.
Job Description:
Description:
- Teaches a full rangeof Electrical Engineering Technology (EET) lecture and lab courses. Courses include, but are not limited to,analog electronics, digital electronics, power electronics, printed circuitboard layout design, PLC, and embedded software programming. Assists with course development and tutoringstudents in EET courses as needed. Performs student learning outcome assessment to make continuousimprovement.
- Prepares and delivers learning activities in order to achieve course outcomes
- Prepares course materials such as syllabi, homework assignments and handouts
- Evaluates and grades students' class work, laboratory work, assignments, papers, and examinations
- Maintains and submits student attendance records, grades and other required documentation by specified deadlines
- Be available to students for coaching
- Periodic meetings with supervisors, division, or College, relative to teaching duties and training and development
Required Qualifications:
- Bachelor's degree in Electrical Engineering or Electrical Engineering Technology
- Knowledge and/or experience in basic analog/digital electronics theories and lab applications
- Demonstrated proficiency in Microsoft Office Suite (or equivalent)
- Advanced communication (verbal, written and interpersonal) and organizational skills
- Appropriately responds to the needs of the community
Preferred Qualifications:
- Master's degree in Electrical Engineering or Electrical Engineering Technology
- Teaching experience
- Some industry experiences
- Experience in surface mount soldering
- Hands-on experience with robots and drones
In order to be considered for an Adjunct faculty position, these additional documents are required to be uploaded: Unofficial transcript & license/certifications (Based on requirements outlined in posting).
Special Instructions to Applicants: During the application process, you may be required to attach a cover letter and/or resume. It is recommended that you have these documents ready to be attached electronically to the online application. This system accepts only MS Word or PDF attachments. Any employment with the College is contingent upon satisfactory completion of a background check and drug screen.
Adjunct only: If hired, you must reside in the state of Ohio and be within commuting distance of this work location/campus to respond to onsite work demands from your employment start date and throughout the duration of your employment with the College, as outlined in 3354:1-40-01.2 Adjunct Faculty Hiring and Employment Procedure.
Affirmative Action Statement: Cuyahoga Community College is committed to attaining excellence through the recruitment and retention of a qualified and diverse workforce. Cuyahoga Community College is an equal employment/educational opportunity institution.
"> 3354:1-40-01.2 Adjunct Faculty Hiring and Employment Procedure.
Equal Opportunity Statement: Cuyahoga Community College is committed to attaining excellence through the recruitment and retention of a qualified workforce. Cuyahoga Community College is an equal employment/educational opportunity institution.