This is a part-time (adjunct) faculty position. Candidates will be interviewed and hired on an as ... design, PLC, and embedded software programming. Assists with course development and ...
This is a part-time (adjunct) faculty position. Candidates will be interviewed and hired on an as ... design, PLC, and embedded software programming. Assists with course development and ...
... or part time engineer may assist. Percentages represent the tasks relative effort but will vary ... Configure DDC, PLC and/or DCS control algorithms * Draft system documentation from templates ...
... or part time engineer may assist. Percentages represent the tasks relative effort but will vary ... Configure DDC, PLC and/or DCS control algorithms * Draft system documentation from templates ...
Instrumentation and Controls Engineer - EIT
Cleveland, OH · On-site
$67K - $94K/yr
Programming experience (Microprocessor, PLC, C++, SQL structures, etc.) is desirable Additional ... Regular full-time and part-time employees (working at least 20 hours per week) have access to ...
Instrumentation and Controls Engineer - EIT
Cleveland, OH · On-site
$67K - $94K/yr
Programming experience (Microprocessor, PLC, C++, SQL structures, etc.) is desirable Additional ... Regular full-time and part-time employees (working at least 20 hours per week) have access to ...
ADVANCED TECHNOLOGIES INSTRUCTOR
$62K - $77K/yr
Attaching a resume does not substitute for completion of the application form. * Part-time work ... programmable logic controller (PLC's), and mechatronics. * Valid driver's license. The educational ...
ADVANCED TECHNOLOGIES INSTRUCTOR
$62K - $77K/yr
Attaching a resume does not substitute for completion of the application form. * Part-time work ... programmable logic controller (PLC's), and mechatronics. * Valid driver's license. The educational ...
Part Time Plc Programmer information
See Cleveland, OH salary details
$39.3K - $45.6K
1% of jobs
$45.6K - $51.9K
3% of jobs
$51.9K - $58.2K
5% of jobs
$58.2K - $64.5K
12% of jobs
$66.2K is the 25th percentile. Wages below this are outliers.
$64.5K - $70.8K
14% of jobs
The median wage is $77.1K / yr.
$70.8K - $77.1K
15% of jobs
$77.1K - $83.4K
18% of jobs
$87.5K is the 75th percentile. Wages above this are outliers.
$83.4K - $89.7K
11% of jobs
$89.7K - $96K
12% of jobs
$96K - $102.3K
6% of jobs
$102.3K - $108.6K
3% of jobs
$39.3K
$78.2K
$108.6K
How much do part time plc programmer jobs pay per year?
As of Aug 21, 2026, the average yearly pay for part time plc programmer in Cleveland, OH is $78,230.00, according to ZipRecruiter salary data. Most workers in this role earn between $65,900.00 and $89,700.00 per year, depending on experience, location, and employer.
What is a part time PLC programmer?
A Part-Time PLC Programmer is responsible for designing, coding, testing, and troubleshooting Programmable Logic Controller (PLC) systems on a part-time or contract basis. They typically work with industrial automation and manufacturing systems to optimize processes and ensure smooth operation. This role may involve modifying existing programs, integrating new equipment, and collaborating with engineers or technicians. Part-time positions may be remote, on-site, or project-based depending on the employer's needs.
What types of projects or responsibilities can I expect as a part time PLC programmer?
As a Part Time PLC Programmer, you will typically be responsible for designing, programming, and troubleshooting automation systems used in manufacturing or industrial environments. Your tasks may include updating existing PLC code, collaborating with engineers and maintenance teams to resolve equipment issues, and helping to integrate new machinery into automated processes. Project scope can range from small modifications to larger-scale system upgrades, depending on the employer’s needs. Flexibility and adaptability are key, as you may work on different projects each week, often coordinating closely with other technical professionals to ensure smooth operations.
What are the key skills and qualifications needed to thrive in the part time PLC programmer position, and why are they important?
To thrive as a Part Time PLC Programmer, you need solid experience with programmable logic controllers, automation systems, and electrical schematics, typically supported by a technical degree in engineering or industrial automation. Familiarity with major PLC platforms (such as Allen-Bradley, Siemens, or Mitsubishi), ladder logic programming, and relevant certifications like Rockwell Automation credentials are highly beneficial. Strong problem-solving skills, attention to detail, and effective communication help set top candidates apart. These capabilities are essential for efficiently designing, troubleshooting, and maintaining automated control systems in industrial environments.
What are the most commonly searched types of Plc Programmer jobs in Cleveland, OH?
The most popular types of Plc Programmer jobs in Cleveland, OH are:
What are popular job titles related to Part Time Plc Programmer jobs in Cleveland, OH?
For Part Time Plc Programmer jobs in Cleveland, OH, the most frequently searched job titles are:
What job categories do people searching Part Time Plc Programmer jobs in Cleveland, OH look for?
The top searched job categories for Part Time Plc Programmer jobs in Cleveland, OH are:
What cities near Cleveland, OH are hiring for Part Time Plc Programmer jobs?
Cities near Cleveland, OH with the most Part Time Plc Programmer job openings:
$942/wk
Part-time
Re-posted 14 days ago
Job description
Adjunct Faculty, Electrical/Electronic Engineering Technology
Special Note: This is a part-time (adjunct) faculty position. Candidates will be interviewed and hired on an as-needed basis throughout the academic year.
Department: Advanced Manufacturing & Computer Science
Location: College-Wide
Reports To: Associate Dean
Recruitment Type: External/Internal
Requisition ID: req7049
Employment Type: Part-Time Faculty
Union Position: Non-Union
Work Schedule: To be determined based on business unit needs. Classes may be offered during the day, evening and/or weekend. Please indicate your availability when applying for this position.
Job Description:
Description:
Required Qualifications:
Preferred Qualifications:
In order to be considered for an Adjunct faculty position, these additional documents are required to be uploaded: Unofficial transcript & license/certifications (Based on requirements outlined in posting).
Special Note: This is a Part-Time Faculty position, with the following set rate of pay: $942.00/Equated Semester Unit (ESU)
Special Instructions to Applicants: During the application process, you may be required to attach a cover letter and/or resume. It is recommended that you have these documents ready to be attached electronically to the online application. This system accepts only MS Word or PDF attachments. Any employment with the College is contingent upon satisfactory completion of a background check.
Adjunct only: If hired, you must reside in the state of Ohio and be within commuting distance of this work location/campus to respond to onsite work demands from your employment start date and throughout the duration of your employment with the College, as outlined inAdjunct Faculty, Electrical/Electronic Engineering Technology
Special Note: This is a part-time (adjunct) faculty position. Candidates will be interviewed and hired on an as-needed basis throughout the academic year.
Department: Advanced Manufacturing & Computer Science
Location: College-Wide
Reports To: Associate Dean
Recruitment Type: External/Internal
Requisition ID: req7049
Employment Type: Part-Time Faculty
Union Position: Non-Union
Work Schedule: To be determined based on business unit needs. Classes may be offered during the day, evening and/or weekend. Please indicate your availability when applying for this position.
Job Description:
Description:
Required Qualifications:
Preferred Qualifications:
In order to be considered for an Adjunct faculty position, these additional documents are required to be uploaded: Unofficial transcript & license/certifications (Based on requirements outlined in posting).
Special Instructions to Applicants: During the application process, you may be required to attach a cover letter and/or resume. It is recommended that you have these documents ready to be attached electronically to the online application. This system accepts only MS Word or PDF attachments. Any employment with the College is contingent upon satisfactory completion of a background check and drug screen.
Adjunct only: If hired, you must reside in the state of Ohio and be within commuting distance of this work location/campus to respond to onsite work demands from your employment start date and throughout the duration of your employment with the College, as outlined in 3354:1-40-01.2 Adjunct Faculty Hiring and Employment Procedure.
Affirmative Action Statement: Cuyahoga Community College is committed to attaining excellence through the recruitment and retention of a qualified and diverse workforce. Cuyahoga Community College is an equal employment/educational opportunity institution.
"> 3354:1-40-01.2 Adjunct Faculty Hiring and Employment Procedure.
Equal Opportunity Statement: Cuyahoga Community College is committed to attaining excellence through the recruitment and retention of a qualified workforce. Cuyahoga Community College is an equal employment/educational opportunity institution.
Special Note: This is a part-time (adjunct) faculty position. Candidates will be interviewed and hired on an as-needed basis throughout the academic year.
Department: Advanced Manufacturing & Computer Science
Location: College-Wide
Reports To: Associate Dean
Recruitment Type: External/Internal
Requisition ID: req7049
Employment Type: Part-Time Faculty
Union Position: Non-Union
Work Schedule: To be determined based on business unit needs. Classes may be offered during the day, evening and/or weekend. Please indicate your availability when applying for this position.
Job Description:
Description:
- Teaches a full rangeof Electrical Engineering Technology (EET) lecture and lab courses. Courses include, but are not limited to,analog electronics, digital electronics, power electronics, printed circuitboard layout design, PLC, and embedded software programming. Assists with course development and tutoringstudents in EET courses as needed. Performs student learning outcome assessment to make continuousimprovement.
- Prepares and delivers learning activities in order to achieve course outcomes
- Prepares course materials such as syllabi, homework assignments and handouts
- Evaluates and grades students' class work, laboratory work, assignments, papers, and examinations
- Maintains and submits student attendance records, grades and other required documentation by specified deadlines
- Be available to students for coaching
- Periodic meetings with supervisors, division, or College, relative to teaching duties and training and development
Required Qualifications:
- Bachelor's degree in Electrical Engineering or Electrical Engineering Technology
- Knowledge and/or experience in basic analog/digital electronics theories and lab applications
- Demonstrated proficiency in Microsoft Office Suite (or equivalent)
- Advanced communication (verbal, written and interpersonal) and organizational skills
- Appropriately responds to the needs of the community
Preferred Qualifications:
- Master's degree in Electrical Engineering or Electrical Engineering Technology
- Teaching experience
- Some industry experiences
- Experience in surface mount soldering
- Hands-on experience with robots and drones
In order to be considered for an Adjunct faculty position, these additional documents are required to be uploaded: Unofficial transcript & license/certifications (Based on requirements outlined in posting).
Special Note: This is a Part-Time Faculty position, with the following set rate of pay: $942.00/Equated Semester Unit (ESU)
Special Instructions to Applicants: During the application process, you may be required to attach a cover letter and/or resume. It is recommended that you have these documents ready to be attached electronically to the online application. This system accepts only MS Word or PDF attachments. Any employment with the College is contingent upon satisfactory completion of a background check.
Adjunct only: If hired, you must reside in the state of Ohio and be within commuting distance of this work location/campus to respond to onsite work demands from your employment start date and throughout the duration of your employment with the College, as outlined inAdjunct Faculty, Electrical/Electronic Engineering Technology
Special Note: This is a part-time (adjunct) faculty position. Candidates will be interviewed and hired on an as-needed basis throughout the academic year.
Department: Advanced Manufacturing & Computer Science
Location: College-Wide
Reports To: Associate Dean
Recruitment Type: External/Internal
Requisition ID: req7049
Employment Type: Part-Time Faculty
Union Position: Non-Union
Work Schedule: To be determined based on business unit needs. Classes may be offered during the day, evening and/or weekend. Please indicate your availability when applying for this position.
Job Description:
Description:
- Teaches a full rangeof Electrical Engineering Technology (EET) lecture and lab courses. Courses include, but are not limited to,analog electronics, digital electronics, power electronics, printed circuitboard layout design, PLC, and embedded software programming. Assists with course development and tutoringstudents in EET courses as needed. Performs student learning outcome assessment to make continuousimprovement.
- Prepares and delivers learning activities in order to achieve course outcomes
- Prepares course materials such as syllabi, homework assignments and handouts
- Evaluates and grades students' class work, laboratory work, assignments, papers, and examinations
- Maintains and submits student attendance records, grades and other required documentation by specified deadlines
- Be available to students for coaching
- Periodic meetings with supervisors, division, or College, relative to teaching duties and training and development
Required Qualifications:
- Bachelor's degree in Electrical Engineering or Electrical Engineering Technology
- Knowledge and/or experience in basic analog/digital electronics theories and lab applications
- Demonstrated proficiency in Microsoft Office Suite (or equivalent)
- Advanced communication (verbal, written and interpersonal) and organizational skills
- Appropriately responds to the needs of the community
Preferred Qualifications:
- Master's degree in Electrical Engineering or Electrical Engineering Technology
- Teaching experience
- Some industry experiences
- Experience in surface mount soldering
- Hands-on experience with robots and drones
In order to be considered for an Adjunct faculty position, these additional documents are required to be uploaded: Unofficial transcript & license/certifications (Based on requirements outlined in posting).
Special Instructions to Applicants: During the application process, you may be required to attach a cover letter and/or resume. It is recommended that you have these documents ready to be attached electronically to the online application. This system accepts only MS Word or PDF attachments. Any employment with the College is contingent upon satisfactory completion of a background check and drug screen.
Adjunct only: If hired, you must reside in the state of Ohio and be within commuting distance of this work location/campus to respond to onsite work demands from your employment start date and throughout the duration of your employment with the College, as outlined in 3354:1-40-01.2 Adjunct Faculty Hiring and Employment Procedure.
Affirmative Action Statement: Cuyahoga Community College is committed to attaining excellence through the recruitment and retention of a qualified and diverse workforce. Cuyahoga Community College is an equal employment/educational opportunity institution.
"> 3354:1-40-01.2 Adjunct Faculty Hiring and Employment Procedure.
Equal Opportunity Statement: Cuyahoga Community College is committed to attaining excellence through the recruitment and retention of a qualified workforce. Cuyahoga Community College is an equal employment/educational opportunity institution.
About Tri C
Sourced by ZipRecruiter
Company size
11 - 50 Employees
Headquarters location
Eureka, IL, US
Year founded
1989