ZipRecruiter

Log In

1

Part Finisher Jobs (NOW HIRING)

Scout Boats

Finisher

Summerville, SC · On-site

JOB SUMMARYFinishing is the part of the production process that is critical to the cosmetic qualities of the boat.The finisher inspects each fiberglass part for defects in gelcoat surface, checks for ...

Accutrex Products

Finisher

Washington, PA · On-site

$16.50 - $20.50/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Join AccuTrex Products, Inc - Gasket Shop Finisher - Daylight shift Monday through Friday ... Review the part information sheet to determine proper tools for use. * Count parts and record ...

Accutrex Products

Finisher

Washington, PA · On-site

$16.50 - $20.50/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Join AccuTrex Products, Inc - Gasket Shop Finisher - Daylight shift Monday through Friday ... Review the part information sheet to determine proper tools for use. * Count parts and record ...

Accutrex Products

Finisher

Washington, PA · On-site

$16.50 - $20.50/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Join AccuTrex Products, Inc - Gasket Shop Finisher - Daylight shift Monday through Friday ... Review the part information sheet to determine proper tools for use. * Count parts and record ...

CDH Inc.

Concrete Finisher

El Dorado, KS

$22 - $28/hr

  • Medical

  • Dental

  • PTO

Civil Carpenter/Concrete Finisher for CD&H Inc. in Kansas and Surrounding Areas - $22-$28 - based ... Join our team and be part of a company that is dedicated to excellence in civil engineering. About ...

CDH Inc.

Concrete Finisher

Wichita, KS

$18.50 - $25.50/hr

  • Medical

  • Dental

  • PTO

Civil Carpenter/Concrete Finisher for CD&H Inc. in Wichita, Kansas and Surrounding Areas - $22-$28 ... Join our team and be part of a company that is dedicated to excellence in civil engineering. About ...

CDH Inc.

Concrete Finisher

Ponca City, OK

$22 - $28/hr

  • Medical

  • Dental

  • PTO

Civil Carpenter/Concrete Finisher for CD&H Inc. in Kansas and Surrounding Areas - $22-$28 - based ... Join our team and be part of a company that is dedicated to excellence in civil engineering. About ...

CDH Inc.

Concrete Finisher

Dodge City, KS · On-site

$22 - $28/hr

  • Medical

  • Dental

  • PTO

Civil Carpenter/Concrete Finisher for CD&H Inc. in Kansas and Surrounding Areas - $22-$28 - based ... Join our team and be part of a company that is dedicated to excellence in civil engineering. About ...

Scout Boats

Experienced Finisher

Summerville, SC · On-site

Finishing is the part of the production process that is critical to the cosmetic qualities of the boat. The finisher inspects each fiberglass part for defects in gelcoat surface and composite layers.

Mears Construction

Concrete Finisher

Saint Joseph, MO · On-site

$17.50 - $24/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Concrete Finisher: Mears Group, A Quanta Services Company At Mears, we believe in developing and ... Join our team and be a part of delivering exceptional concrete finishing solutions. This position ...

Comptec Performance Composites

FINISHER

Irwin, PA · On-site

$20 - $23/hr

As a Finisher, you will play a crucial role in ensuring that our products meet the highest ... Ability to work independently and as part of a team in a fast-paced environment. * Familiarity with ...

Comptec Inc

FINISHER

Irwin, PA · On-site

$20 - $23/hr

As a Finisher, you will play a crucial role in ensuring that our products meet the highest ... Ability to work independently and as part of a team in a fast-paced environment. * Familiarity with ...

Baker Concrete Construction, Inc

Finisher

Phoenix, AZ · On-site

$20.50 - $28.25/hr

Summary The Finisher performs under the direction of the finisher foreman/lead and carries out ... any or part of the application process may make their requests known by emailing hrtech ...

Baker Construction Enterprises

Finisher

Norfolk, VA · On-site

$21 - $29/hr

Summary The Finisher performs under the direction of the finisher foreman/lead and carries out ... any or part of the application process may make their requests known by emailing hrtech ...

Baker Concrete Construction, Inc

Finisher

Charlotte, NC

$20.25 - $27.75/hr

Summary The Finisher performs under the direction of the finisher foreman/lead and carries out ... any or part of the application process may make their requests known by emailing hrtech ...

Big D Metalworks

Architectural Metal Finisher

Dallas, TX · On-site

$16.50 - $20.50/hr

The finisher is the counter-part of the fabricator. The finisher is a Team Member with at least two years of experience in finishing. Finishing consists of polishing, painting, etc. The finisher ...

next page

Showing results 1-20

All JobsPart Finisher Jobs

Part Finisher information

See salary details

$12

$20

$27

How much do part finisher jobs pay per hour?

As of Aug 13, 2026, the average hourly pay for part finisher in the United States is $20.06, according to ZipRecruiter salary data. Most workers in this role earn between $16.35 and $23.08 per hour, depending on experience, location, and employer.

What are some common challenges faced by part finishers, and how can they be effectively managed?

Part Finishers often encounter challenges such as maintaining consistent quality across high production volumes and working with a variety of materials that may require different finishing techniques. Managing these challenges typically involves staying up-to-date with safety protocols, using precise inspection tools, and collaborating closely with quality control teams. Good communication with supervisors and other production staff is also key to resolving issues quickly and ensuring deadlines are met. Staying organized and proactive in identifying potential defects early can greatly improve efficiency and job satisfaction.

What does a part finisher do?

A Part Finisher is responsible for completing the final processing of manufactured parts to ensure they meet quality and design specifications. This typically involves tasks such as deburring, polishing, cleaning, sanding, or coating parts after they have been machined or assembled. Part Finishers play a key role in making sure each part has the correct appearance, smoothness, and functionality before it is shipped or used in further assembly. They often use a variety of hand tools, power tools, and finishing equipment, and must pay close attention to detail to spot any defects or imperfections.

What are the key skills and qualifications needed to thrive as a part finisher, and why are they important?

To thrive as a Part Finisher, you need strong attention to detail, manual dexterity, and experience with manufacturing or production processes, often supported by a high school diploma or equivalent. Familiarity with finishing tools such as sanders, grinders, and measuring instruments, as well as knowledge of safety protocols, is typically required. Reliability, time management, and the ability to work both independently and as part of a team are valuable soft skills in this role. These competencies ensure high-quality finished products, adherence to safety standards, and efficient workflow in manufacturing environments.

What is the difference between Part Finisher vs Assembly Line Worker?

AspectPart FinisherAssembly Line Worker
Primary RoleRefines and finishes parts to meet quality standardsAssembles components along the production line
Skills & CertificationsAttention to detail, finishing techniques, sometimes certifications in quality controlBasic mechanical skills, safety training
Work EnvironmentWorkshop or manufacturing floor focused on finishing processesAssembly line in a factory setting
Industry UsageManufacturing, metalworking, woodworkingAutomotive, electronics, consumer goods manufacturing

While both roles are part of manufacturing, a Part Finisher focuses on refining and perfecting parts after initial production, ensuring quality and precision. An Assembly Line Worker, on the other hand, is involved in the initial assembly of products, working along a production line. Understanding these differences helps in choosing the right career path or job search focus.

More about Part Finisher jobs

What cities are hiring for Part Finisher jobs?

Cities with the most Part Finisher job openings:

What job categories do people searching Part Finisher jobs look for?

The top searched job categories for Part Finisher jobs are:

Part Finisher jobs near you
Infographic showing various Part Finisher job openings in the United States as of August 2026, with employment types broken down into 1% As Needed, 87% Full Time, 7% Part Time, 1% Temporary, 2% Contract, and 2% Nights. Highlights an 99% Physical, and 1% Remote job distribution, with an average salary of $41,726 per year, or $20.1 per hour.

3D Printed Part Finisher - Digital Engineer

ALOIS LLC

Research Triangle Park, NC • On-site

$16 - $20.75/hr

Contractor

Re-posted 7 hours ago

Job description

Work days/hours: Monday through Friday (8am to 5pm).
**ONSITE DAILY - LOCALS ONLY**
POSITION DESCRIPTION
Position Title:
3D Printed Part Finisher – 3D Printing
Location: RTP, North Carolina
GENERAL FUNCTION:
The 3D Printed Part Finisher is an essential part of clients’s Digital Engineering (DE) 3D Printing & Prototyping team and will have the opportunity to contribute to the advancement of client’s next-generation medical products and enhance the current product portfolio.  Under the general direction of 3D Printing & Prototyping management, the Engineering Technician will provide quality “finished” 3D printed parts and/or components/fixtures to business customers in a safe and timely manner.  We are excited to add a highly motivated individual that can adapt quickly and work within a dynamic environment.  
RESPONSIBILITIES:
• Clean 3D Printed parts according to defined standard operating procedures.
• Hand finish 3D printed parts using defined techniques while maintaining feature geometry and checking tolerances on key dimensions. 
• Use precision measurement devices (i.e. – digital calipers, GOM) to ensure dimensional accuracy.
• Operate 3D Printing equipment when performing routine and rotational maintenance on a regular schedule to produce highly accurate medical device prototypes in a timely manner.
• Maintain proficiency in viewing model files using CAD software (i.e. - Magics by Materialise). 
• Maintain finishing supplies in the laboratory and evaluation of special supplies, techniques, and equipment that may be beneficial for quality part finishing.
• Perform work following standard operating procedures. 
• Wear proper safety equipment where required.
• Under the direction of the 3D Printing & Prototyping Manager, contribute as needed in the R&D of 3D printing applications.
• Perform other duties as assigned.
QUALIFICATIONS:
• High school diploma is required.
• 1+ year experience with 3D printed part post processing or machining activities.  
• Experience with 3D printing is a strong plus; examples: Stereolithography (SLA), Carbon (DLS), Digital Light Processing (DLP), PolyJet 3D Printing, and Fused Filament Fabrication (FFF).
• Proven computer experience, including the ability to use CAD software desired.
• Organized and time-oriented individual with the ability and drive to contribute towards the quick turn-around time on finished parts while ensuring fine detail and accuracy.  
• Open to exploring new techniques related to 3D Printing & Prototyping or DE-related areas.  
• Proven ability to work successfully in both team and individual situations.  
• Clear verbal and written communication skills.  
• Ability to lift at least 40 lbs. a must.