ZipRecruiter

Log In

1

Oil Rig Inspection Jobs in Colorado (NOW HIRING)

Ranger Energy Services LLC

Operator-Cement

Milliken, CO · On-site

$24 - $28/hr

Performs Cement Pump inspection and testing as required * Assist HSE, DOT, and all other required ... Pre checks all oil levels prior to start of job * Performs fall protection donning and doffing as ...

Ranger Energy Services

Operator - Cement

Milliken, CO · On-site

$24 - $28/hr

Performs Cement Pump inspection and testing as required * Assist HSE, DOT, and all other required ... Pre checks all oil levels prior to start of job * Performs fall protection donning and doffing as ...

Mears Group, Inc.

DRILL OPERATOR

Henderson, CO · On-site

$36 - $38/hr

Mears is a leading provider of engineering and construction solutions in oil and gas, electric ... Perform routine maintenance on the HDD rig, conduct inspections, and make necessary repairs to ...

Mears Construction

HDD Drill Operators

Henderson, CO · On-site

$30 - $36/hr

Mears is a leading provider of engineering and construction solutions in oil and gas, electric ... Perform routine maintenance on the HDD rig, conduct inspections, and make necessary repairs to ...

Ranger

Operator - Cement

Milliken, CO · On-site

$24 - $28/hr

Performs Cement Pump inspection and testing as required * Assist HSE, DOT, and all other required ... Pre checks all oil levels prior to start of job * Performs fall protection donning and doffing as ...

Prim

Hydrovac Operator

Denver, CO · On-site

Experience working in construction, utility locating, or oil & gas is preferred, but not required ... Conduct pre- and post-trip inspections of the truck and equipment * Use personal protective ...

Ranger Energy Services LLC

Cement Hand

Milliken, CO · On-site

$22 - $26/hr

... inspection and maintenance of equipment * Successfully perform elevator handling, hardline ... rig preferred * Must be familiar with pump and tank operations * Must have a valid state issued ...

Ranger Energy Services

Cement Hand

Fort Morgan, CO · On-site

$22 - $26/hr

... inspection and maintenance of equipment * Successfully perform elevator handling, hardline ... ABOUT THE COMPANY Ranger Energy Services is an oil & gas completion and production solutions ...

Hydro Resources Holdings

CDL Driver

Fort Lupton, CO · On-site

The primary duties of the CDL Driver include performing Pre-Trip/Post Trip inspections, properly ... Checks oil, water, fuel, tires, hydraulic system, etc., and makes appropriate adjustments to ensure ...

Hydro Resources Holding

CDL Driver

Fort Lupton, CO · On-site

$24 - $35/hr

The primary duties of the CDL Driver include performing Pre-Trip/Post Trip inspections, properly ... Checks oil, water, fuel, tires, hydraulic system, etc., and makes appropriate adjustments to ensure ...

Hydro Resources Holding

CDL Driver

Fort Lupton, CO · On-site

The primary duties of the CDL Driver include performing Pre-Trip/Post Trip inspections, properly ... Checks oil, water, fuel, tires, hydraulic system, etc., and makes appropriate adjustments to ensure ...

Ranger

Cement Hand

Fort Morgan, CO · On-site

$22 - $26/hr

... inspection and maintenance of equipment * Successfully perform elevator handling, hardline ... ABOUT THE COMPANY Ranger Energy Services is an oil & gas completion and production solutions ...

U.S. Army Reserve Command

Aircraft Mechanic

Fort Carson, CO · On-site +1

$36.17 - $42.19/hr

Inspect Aircraft * Repair, replace rotary wing aircraft assemblies and components * Use tools and ... Rig flight control systems Requirements Help Conditions of employment * Appointment may be subject ...

previous page

Showing results 41-54

All JobsOil Rig Inspection JobsOil Rig Inspection Jobs in Colorado

Oil Rig Inspection information

See Colorado salary details

$15

$23

$40

How much do oil rig inspection jobs pay per hour?

As of Sep 10, 2026, the average hourly pay for oil rig inspection in Colorado is $23.86, according to ZipRecruiter salary data. Most workers in this role earn between $16.68 and $30.10 per hour, depending on experience, location, and employer.

What is an oil rig inspector?

Oil rig inspectors are professionals responsible for evaluating the safety, integrity, and compliance of oil rigs, both offshore and onshore. Their main duties include conducting regular inspections of equipment, structures, and safety systems to ensure they meet industry regulations and environmental standards. Inspectors also identify potential hazards, recommend corrective actions, and verify that maintenance and repairs are properly carried out. Their work helps prevent accidents, protects the environment, and ensures efficient operation of the oil rig.

What are the key skills and qualifications needed to thrive as an oil rig inspector?

To thrive as an Oil Rig Inspector, you need a thorough understanding of safety regulations, mechanical systems, and industry standards, often supported by certifications such as API or NACE. Familiarity with inspection tools, non-destructive testing (NDT) equipment, and reporting software is typically required. Keen attention to detail, problem-solving abilities, and strong communication skills help inspectors identify hazards and coordinate effectively with rig personnel. These competencies are crucial to ensuring operational safety, regulatory compliance, and the prevention of costly accidents or environmental incidents.

What are the typical challenges faced by professionals working in oil rig inspection roles?

Oil rig inspectors often encounter challenging environments, such as working at heights, exposure to harsh weather conditions, and extended periods offshore. Additionally, inspectors must stay vigilant about safety protocols and regulatory compliance while coordinating with diverse teams, including engineers and rig operators. Adapting to rapidly changing operational schedules and maintaining thorough documentation under tight deadlines are also common aspects of the job. Overcoming these challenges requires strong attention to detail, effective communication skills, and a commitment to continuous learning regarding industry standards and best practices.

What is the difference between Oil Rig Inspection vs Oil Rig Maintenance Technician?

AspectOil Rig InspectionOil Rig Maintenance Technician
CertificationsAPI Inspector Certification, safety trainingHVAC, electrical, mechanical certifications
Work EnvironmentOffshore rigs, platform inspectionsOffshore rigs, equipment repair
Primary FocusAssessing rig safety and complianceMaintaining and repairing rig equipment
Employer & Industry UsageOil & gas companies, inspection firmsOil & gas companies, maintenance contractors

Oil Rig Inspection and Oil Rig Maintenance Technician roles both operate in offshore environments within the oil and gas industry. While inspectors focus on safety assessments and compliance, maintenance technicians handle equipment repairs and upkeep. Both roles require specialized certifications and are essential for safe, efficient rig operations.

What are popular job titles related to Oil Rig Inspection jobs in Colorado?

For Oil Rig Inspection jobs in Colorado, the most frequently searched job titles are:

What job categories do people searching Oil Rig Inspection jobs in Colorado look for?

The top searched job categories for Oil Rig Inspection jobs in Colorado are:

Oil Rig Inspection jobs near you
Infographic showing various Oil Rig Inspection job openings in Colorado as of August 2026, with employment types broken down into 1% As Needed, 86% Full Time, 8% Part Time, 1% Temporary, 2% Contract, and 2% Nights. Highlights an 97% Physical, 1% Hybrid, and 2% Remote job distribution, with an average salary of $49,625 per year, or $23.9 per hour.

Operator-Cement

Milliken, CO • On-site

Ranger Energy Services LLC
Oil and Gas Extraction • 201 - 500 employees
Learn more about Ranger Energy Services LLCexternal

$24 - $28/hr

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Re-posted 14 days ago

Ranger Energy Services rating

7.1

Company rating: 7.1 out of 10

Based on 7 frontline employees who took The Breakroom Quiz

Job description

Operator - Cement
SUMMARY
The primary duty of the Cement Operator is to operate the controls and equipment on a cementing unit. The Operator manages crew members, maintains productivity standards, and works closely with immediate supervisor and or customer ensuring that quality products and services are being safely provided.
ESSENTIAL DUTIES AND RESPONSIBILITIES
  • Performs Cement Pump inspection and testing as required
  • Assist HSE, DOT, and all other required departments with document management
  • Completes field tickets in a timely manner and turns in to appropriate department for processing
  • Checks equipment systems and confirms functionality
  • Troubleshoots maintenance issues; to include performing worn equipment recognition checks and turning in maintenance requests for repair or replacement of equipment as needed
  • Operates the tools required to run a cementing unit, to include the cement shoe, float shoe, casing centralizer, and casing scratcher
  • Preforms pre and post job check list to be reviewed by management for accuracy
  • Pre checks all oil levels prior to start of job
  • Performs fall protection donning and doffing as required
  • Performs hydro testing as required
  • Changes the gaskets of the pumps and mixing tops as required
  • Participate in meet and greet at location sites
  • Participate in JSA and tail gate meetings as scheduled
  • Responsible for keeping work site, equipment, and tools clean and in good working order
  • Assist in the day-to-day lubrication and minor adjustments of equipment
  • Ability to understand Hazard ID cards and near hit cards, as well as follow standard operating procedure for completion of cards
  • Assist in the daily inspection and maintenance of equipment
  • Successfully perform elevator handling, hardline construction, and energy isolation procedures
  • Trains and mentors crew members on day-to-day operations
  • Other duties as assigned

REQUIRED EDUCATION, QUALIFICATIONS AND EXPERIENCE
  • 1-3 years of experience working on a well servicing rig preferred
  • Must be familiar with pump and tank operations
  • Must have a valid state issued driver's license, CDL, or the ability to obtain one
  • Ability to perform manual labor required to operate cementing unit
  • Ability to show knowledge of all other Ranger equipment
  • Excellent communication, people, and leadership skills
  • Must be able to multi-task in a fast-paced environment
  • Ability to work a flexible schedule

COMPUTER
  • Basic knowledge of Microsoft Office preferred

PRE-EMPLOYMENT REQUIREMENTS
  • Must complete and pass all required pre-employment screenings

ABOUT THE COMPANY
Ranger Energy Services is an oil & gas completion and production solutions company with a foundation built on well servicing, wireline, and natural gas processing. Ranger Energy is committed to providing employees with a benefits program that is both comprehensive and competitive. The programs are designed to invest in you and the things you care about - your health, your family, and your future. Come join our team of highly skilled, motivated employees, working on state-of-the-art equipment with outstanding compensation and additional benefits, including:
  • Medical/Dental/Vision
  • Flexible Spending Account/Health Savings Account
  • Life Insurance
  • Short- and Long-Term Disability Insurance
  • Employee Assistance Program
  • 401(k) Retirement Plan with Employer Match
  • PTO (depending on eligibility)

What Ranger Energy Services employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply