ZipRecruiter

Log In

1

Oil Rig Fitter Jobs (NOW HIRING)

Fesco

Hydraulic Choke Operator Assistant

Alice, TX

... well testing, and rig up/rig down services in oil and gas fracturing operations. They are ... Load fittings weighing 40 lbs .each. * Drive flowline tie-down stakes with 8lbs. or larger ...

FESCO LTD.

Hydraulic Choke Operator

Alice, TX

... well testing, and rig up/rig down services in oil and gas fracturing operations. They are ... Load fittings weighing 40 lbs .each. * Drive flowline tie-down stakes with 8lbs. or larger ...

Fesco

Hydraulic Choke Operator

Alice, TX

... well testing, and rig up/rig down services in oil and gas fracturing operations. They are ... Load fittings weighing 40 lbs .each. * Drive flowline tie-down stakes with 8lbs. or larger ...

FESCO LTD.

Hydraulic Choke Operator

Pecos, TX

... well testing, and rig up/rig down services in oil and gas fracturing operations. They are ... Load fittings weighing 40 lbs .each. * Drive flowline tie-down stakes with 8lbs. or larger ...

Fesco

Hydraulic Choke Operator

Lufkin, TX · On-site

... well testing, and rig up/rig down services in oil and gas fracturing operations. They are ... Load fittings weighing 40 lbs .each. * Drive flowline tie-down stakes with 8lbs. or larger ...

FESCO LTD.

Hydraulic Choke Operator

Pecos, TX · On-site

... well testing, and rig up/rig down services in oil and gas fracturing operations. They are ... Load fittings weighing ±40 lbs .each. * Drive flowline tie-down stakes with 8lbs. or larger ...

Nabors Industries Limited

ALASKA ELECTRICIAN

Anchorage, AK · On-site

$25.50 - $35/hr

... rig floor hydraulic power unit, bulk air compressor, mud mixer, hopper pump, shale shaker, degasser ... C. motors that drive the saltwater pump system, non-portable water pump system, oil pump system ...

American Cementing, LLC

Field Operator-CDL

Rifle, CO · On-site

Perform rig-in/rig-out procedures and monitor equipment during operations. * Mix chemicals and ... or oilfield services preferred. Skills & Knowledge * Must be able to work flexible schedules ...

next page

Showing results 1-20

All JobsOil Rig Fitter Jobs

Oil Rig Fitter information

See salary details

$9

$22

$33

How much do oil rig fitter jobs pay per hour?

As of Jul 12, 2026, the average hourly pay for oil rig fitter in the United States is $22.70, according to ZipRecruiter salary data. Most workers in this role earn between $18.75 and $25.96 per hour, depending on experience, location, and employer.

Is it hard to get hired at an oil rig?

Getting hired as an oil rig fitter can be competitive due to the specialized skills and certifications required, such as safety training and technical knowledge of equipment. Employers often look for relevant experience, physical fitness, and the ability to work in challenging environments, which can make the hiring process demanding.

What is the difference between Oil Rig Fitter vs Oil Rig Welder?

AspectOil Rig FitterOil Rig Welder
CertificationsMechanical or technical certifications, safety trainingWelding certifications, such as AWS or ASME
Work EnvironmentMechanical assembly, maintenance on rigsWelding, cutting, and fabrication on rigs
Industry UsageCommonly employed for installing and maintaining equipmentPrimarily involved in welding and metal repairs

Oil Rig Fitters and Oil Rig Welders both work in offshore environments and require safety certifications. Fitters focus on assembling and maintaining mechanical systems, while Welders specialize in welding and metal fabrication. Both roles are essential for rig operations but differ in technical skills and daily tasks.

What are Oil Rig Fitters?

Oil Rig Fitters are skilled tradespeople who install, assemble, maintain, and repair machinery and piping systems on oil rigs, both onshore and offshore. Their work ensures that vital mechanical and structural components of the rig operate safely and efficiently. Oil Rig Fitters often read blueprints, use specialized tools, and follow strict safety protocols due to the hazardous environment. This role is crucial for the continuous and safe extraction of oil and gas.

How much do pipefitters make on oil rigs?

Oil rig fitters, including pipefitters working on offshore platforms, typically earn between $70,000 and $120,000 annually, depending on experience, certifications, and location. Overtime, hazardous environment pay, and specialized skills can increase earnings for these skilled tradespeople.

Can you make 200k in the oil field?

Oil rig fitters can potentially earn $200,000 or more annually, especially with experience, specialized skills, and working in high-paying regions or offshore environments. Achieving this income often requires overtime, certifications, and working in demanding conditions. However, typical salaries vary widely based on location, experience, and employer policies.

What is the highest paid oil rig job?

The highest paid oil rig jobs are typically specialized roles such as drilling engineers, toolpushers, or offshore installation managers, with salaries often exceeding $150,000 annually. These positions require extensive experience, technical skills, and certifications, and often involve long shifts in challenging offshore environments.

What are the key skills and qualifications needed to thrive as an Oil Rig Fitter, and why are they important?

To thrive as an Oil Rig Fitter, you need strong mechanical aptitude, knowledge of piping systems, and relevant vocational qualifications or apprenticeships in mechanical or pipe fitting. Familiarity with technical drawings, welding equipment, hydraulic tools, and certifications like OPITO or BOSIET for offshore safety are typically required. Attention to detail, teamwork, and effective problem-solving are essential soft skills for this role. These competencies ensure safe, efficient installation and maintenance of rig equipment in demanding offshore environments.

What are some common challenges Oil Rig Fitters face while working offshore, and how can they prepare for them?

Oil Rig Fitters often encounter challenges such as adapting to harsh weather conditions, working in confined spaces, and maintaining strict safety protocols. Being offshore means spending extended periods away from home and collaborating closely with a diverse crew, which requires strong communication and teamwork skills. To prepare, candidates should focus on physical fitness, familiarize themselves with safety regulations, and develop resilience to adapt to the demanding environment. Ongoing training and a proactive attitude toward learning new equipment and procedures can also help Oil Rig Fitters succeed on the job.
More about Oil Rig Fitter jobs
What are the most commonly searched types of Oil Rig Fitter jobs? The most popular types of Oil Rig Fitter jobs are:
What job categories do people searching Oil Rig Fitter jobs look for? The top searched job categories for Oil Rig Fitter jobs are:
Oil Rig Fitter jobs near you
Infographic showing various Oil Rig Fitter job openings in the United States as of July 2026, with employment types broken down into 1% Internship, 1% As Needed, 90% Full Time, 5% Part Time, 2% Contract, and 1% Nights. Highlights an 99% Physical, and 1% Remote job distribution, with an average salary of $47,216 per year, or $22.7 per hour.
Hydraulic Choke Operator Assistant

Hydraulic Choke Operator Assistant

Fesco

Alice, TX

Full-time

Re-posted 6 days ago

Job description

A Hydraulic Choke Operator Assistant performs work in drill out, flowback, well testing, and rig up/rig down services in oil and gas fracturing operations. They are responsible for tearing apart and rebuilding hydraulic chokes used in the field as well as operating this equipment from a command center. They must have knowledge of well testing equipment and the ability to diagnose, repair and troubleshoot malfunctions when needs arise. Basic computer knowledge is a must in order to perform data entry and to generate field reports. Ensure accurate collection and reporting of well production flowrates are documented as per internal and/or client based guidelines. Workload consists of 75% field and 25% shop. They must have a a clean driving record with the ability to obtain and maintain a commercial driver's license (Class "A" CDL).

I. Field Work

A. Rigging up a portable separator and heater

  1. Lift chicksan bundles weighing 65 lbs.
  2. Attach chicksan bundle to wellhead, entailing lift from ground level to above head level.
  3. Hammer unions from ground level to above head level.
  4. Drive flowline tie-down stakes with 8 lbs. to 12 lb. or larger sledgehammer or Electric Bosch demolition hammer weighing 60 lbs.
  5. Make up threaded connections with two (2) 24" pipe wrenches occasionally using a 36" pipe wrench from ground level to above head level.
  6. Monitor and maintain hydraulic choke equipment during coiled tubing washes, frac flowback etc.
  7. Operate hydraulic choke controls within safe parameters of the designate equipment.
  8. Maintains and repairs all components of high pressure operation: flowline/connections, hydraulic choke manifolds, sand separators, test separators, flare stacks, gas busters and safety systems.

B. Rigging up flowback manifold and sand separator.

  1. Load fittings weighing 40 lbs .each.
  2. Drive flowline tie-down stakes with 8lbs. or larger sledgehammer or electric Bosch demolition hammer weighing 60 lbs.
  3. Stoop, bend, twist, turn, and lift to align and join threaded components at heights from ground level to above head level.
  4. Carry and connect 15 foot long threaded pipe joints with a second person's assistance (1/4 joint weight 40 lbs.) Full 30' pipe joint weighs 140 lbs.
  5. Hammer union connections and screw threaded connections with 24" pipe wrench from ground level to above head level.
  6. Perform all routine choke changes, blowdowns, tank strapping and pressure readings anytime or when directed.

Shop Work

  1. Load and unload field work equipment weighing 70 lbs. to/from a height of 36"to 60".
  2. Lift items and fittings weighing 30 lbs. placing them on shelves head high.
  3. Occasionally lift weights 70 lbs. to a height of 36" to 60".
  4. Wash any and all FESCO equipment.
  5. Clean and sweep shop
  6. Turn around equipment in order for it to be ready for the next job.

Safety

  1. In order to comply with Department of Transportation regulations, must be able to pass a "DOT" physical, secure and maintain at least a Class "B" CDL with an "H" endorsement.
  2. Work in all types of weather conditions (i.e. extreme heat and cold and high humidity) for extended periods of time.
  3. Work in a toxic environment (Hydrogen Sulfide Gas) while wearing a self-contained breathing apparatus with full face sealed respiratory equipment weighing 30 lbs.
  4. Work at remote well locations 2 hours from the nearest medical facility.
  5. Work comfortably up to 15" above ground while wearing the appropriate fall protection equipment designated for the job.
  6. Close a large wellhead wing or master valve high or above in case of an emergency.
  7. Be mobile in the event of an emergency.
  8. Ability to evacuate a fellow employee in the event of an emergency.
  9. They will perform other duties assigned.
  10. They work under the direction of the District Manager.

Apply