ZipRecruiter

Log In

1

Non Destructive Testing Trainee Jobs in Dallas, TX

Union Technologies

Senior Process Engineer

Dallas, TX · On-site

$90K - $130K/yr

Experience with non-destructive testing (NDT) methods (ultrasonic, dye penetrant) for process validation. * Six Sigma Black Belt or ASQ Certified Manufacturing Engineer (CMfgE). Work Environment: You ...

Union Technologies

Senior Process Engineer

Dallas, TX · On-site

$102K - $133K/yr

Experience with non-destructive testing (NDT) methods (ultrasonic, dye penetrant) for process validation. * Six Sigma Black Belt or ASQ Certified Manufacturing Engineer (CMfgE). Work Environment: You ...

Signicast

NDT Technician II

Hutchins, TX · On-site

Ensure conforming quality castings by conducting Non-Destructive Testing (NDT) using, but not limited to, the following methods: X-ray, Magnetic Particle Inspection (MPI), Fluorescent, Penetrant ...

Penhall

Subsurface Analyst (Immediate Hire)

Dallas, TX · On-site

Technical training in Ground Penetrating Radar (GPR), Non-Destructive Testing (NDT), or construction scanning preferred * Prior experience with GPR, X-ray scanning, utility locating, or concrete ...

Thompson Engineering

Certified Welding Inspector

Dallas, TX · On-site

$26 - $35.25/hr

Coordinate and monitor non-destructive testing (NDT) activities as required* Prepare daily field reports, inspection summaries, and supporting documentation* Travel to various job sites, including ...

Thompson Engineering

Certified Welding Inspector

Dallas, TX · On-site

$26 - $35.25/hr

Coordinate and monitor non-destructive testing (NDT) activities as required* Prepare daily field reports, inspection summaries, and supporting documentation* Travel to various job sites, including ...

Thompson Engineering

Certified Welding Inspector

Dallas, TX

$26 - $35.25/hr

... non-destructive testing (NDT) activities as required • Prepare daily field reports, inspection summaries, and supporting documentation • Travel to various job sites, including out-of-town and ...

Thompson Engineering

Certified Welding Inspector

Dallas, TX

$26 - $35.25/hr

... non-destructive testing (NDT) activities as required • Prepare daily field reports, inspection summaries, and supporting documentation • Travel to various job sites, including out-of-town and ...

Thompson Engineering

Certified Welding Inspector

Dallas, TX · On-site

$26 - $35.25/hr

... non-destructive testing (NDT) activities as required • Prepare daily field reports, inspection summaries, and supporting documentation • Travel to various job sites, including out-of-town and ...

Thompson Engineering

Certified Welding Inspector

Dallas, TX · On-site

$26 - $35.25/hr

... non-destructive testing (NDT) activities as required • Prepare daily field reports, inspection summaries, and supporting documentation • Travel to various job sites, including out-of-town and ...

Thompson Engineering

Certified Welding Inspector

Dallas, TX

$26 - $35.25/hr

... non-destructive testing (NDT) activities as required • Prepare daily field reports, inspection summaries, and supporting documentation • Travel to various job sites, including out-of-town and ...

Thompson Engineering

Certified Welding Inspector

Dallas, TX

$26 - $35.25/hr

... non-destructive testing (NDT) activities as required • Prepare daily field reports, inspection summaries, and supporting documentation • Travel to various job sites, including out-of-town and ...

Union Technologies

Metallurgist

Dallas, TX · On-site

$82K - $100K/yr

Experience with non-destructive testing methods (UT, PT, RT). * Six Sigma Green Belt or Black Belt, ASQ CQE, or equivalent certification. * Exposure to additive manufacturing metallurgy. * Experience ...

Union Technologies

Metallurgist

Dallas, TX · On-site

$82K - $100K/yr

Experience with non-destructive testing methods (UT, PT, RT). * Six Sigma Green Belt or Black Belt, ASQ CQE, or equivalent certification. * Exposure to additive manufacturing metallurgy. * Experience ...

previous pagenext page

Showing results 21-40

All JobsNon Destructive Testing JobsNon Destructive Testing Trainee JobsNon Destructive Testing Trainee Jobs in Dallas, TX

Non Destructive Testing Trainee information

What are the typical career progression opportunities for a non destructive testing trainee?

As a Non Destructive Testing (NDT) Trainee, you can expect to start by working under the supervision of certified NDT technicians while gaining hands-on experience in various testing methods such as ultrasonic, radiographic, or magnetic particle testing. With additional training, certifications, and on-the-job experience, you can progress to higher certification levels (e.g., Level II or Level III technician), take on roles with greater responsibility, and specialize in advanced techniques or industry sectors. Career advancement may also include moving into supervisory, quality assurance, or inspection management positions, and some professionals transition into training or consulting roles as they gain expertise. Continuous learning and certification are key to long-term advancement in this field.

Is non destructive testing a good career?

Non destructive testing (NDT) is a stable career option for those interested in quality assurance and safety inspection. It requires technical skills, certifications such as ASNT, and knowledge of testing methods like ultrasonic or radiographic testing. The field offers opportunities in industries such as manufacturing, aerospace, and energy, with steady demand for qualified NDT trainees.

Is it hard to get a non destructive testing trainee job?

Securing a non destructive testing trainee position can be competitive, as it often requires relevant technical knowledge, certifications, or training in methods like ultrasonic or radiographic testing. Candidates with a background in engineering or related fields and a willingness to learn on the job typically have better chances of obtaining such roles.

What are the key skills and qualifications needed to thrive as a non destructive testing trainee?

To thrive as a Non Destructive Testing Trainee, you need a basic understanding of physics and engineering principles, along with a high school diploma or technical certification in NDT methods. Familiarity with inspection tools such as ultrasonic, radiographic, or magnetic particle testing equipment, and relevant certifications like ASNT Level I or II, are typically required. Keen attention to detail, strong analytical thinking, and effective communication help trainees accurately interpret results and work safely within a team. These skills ensure the reliability of inspections, compliance with safety standards, and the integrity of critical infrastructure.

What is the difference between Non Destructive Testing Trainee vs NDT Inspector?

AspectNon Destructive Testing TraineeNDT Inspector
CertificationsBasic NDT certifications (e.g., Level I)Advanced certifications (e.g., Level II or III)
Work EnvironmentTraining sites, laboratories, on-the-job learningField inspections, plant facilities, industrial sites
Job RoleLearning and assisting in NDT methodsPerforming NDT tests independently
Experience LevelEntry-level, training-focusedExperienced, certified professional

The Non Destructive Testing Trainee is an entry-level role focused on learning NDT techniques, while the NDT Inspector is a certified professional responsible for conducting inspections independently. Trainees gain foundational skills, whereas inspectors apply their expertise in real-world scenarios.

What is a non destructive testing trainee?

Non Destructive Testing (NDT) Trainees are entry-level professionals who are learning to inspect and evaluate materials, components, or assemblies for defects without causing any damage to them. They work under the supervision of certified NDT technicians or engineers and receive practical and theoretical training in various NDT methods such as ultrasonic, radiographic, magnetic particle, and dye penetrant testing. Their main goal is to develop the skills and knowledge required to safely and accurately perform NDT procedures, eventually working towards certification in specific NDT methods.

Is non destructive testing in high demand?

Non-destructive testing (NDT) professionals, including trainees, are in high demand across industries such as manufacturing, aerospace, and energy due to the need for quality assurance and safety inspections. The industry is expected to grow as infrastructure and equipment maintenance increase, and certifications like ASNT or AWS can enhance job prospects for NDT trainees.

How to get into non destructive testing with no experience?

Non-destructive testing (NDT) trainees typically start by gaining basic knowledge of inspection methods such as ultrasonic, radiographic, or magnetic particle testing through online courses or technical schools. Entry often requires a high school diploma or equivalent, and obtaining certifications like ASNT Level I or II can improve job prospects; on-the-job training is common to develop practical skills in a controlled environment.
What are the most commonly searched types of Non Destructive Testing jobs in Dallas, TX? The most popular types of Non Destructive Testing jobs in Dallas, TX are:
What are popular job titles related to Non Destructive Testing Trainee jobs in Dallas, TX? For Non Destructive Testing Trainee jobs in Dallas, TX, the most frequently searched job titles are:
What job categories do people searching Non Destructive Testing Trainee jobs in Dallas, TX look for? The top searched job categories for Non Destructive Testing Trainee jobs in Dallas, TX are:
What cities near Dallas, TX are hiring for Non Destructive Testing Trainee jobs? Cities near Dallas, TX with the most Non Destructive Testing Trainee job openings:
Non Destructive Testing Trainee jobs near you
Infographic showing various Non Destructive Testing Trainee job openings in Dallas, TX as of August 2026, with employment types broken down into 100% Full Time. Highlights an 100% In-person job distribution.

Senior Process Engineer

Union Technologies

Dallas, TX • On-site

$90K - $130K/yr

Full-time

Re-posted 3 days ago

Job description

Union Technologies is reindustrializing America's defense manufacturing base with a first-of-its-kind Factories-as-a-Stockpile™ model, integrating advanced robotics, manufacturing, and software into sovereign factory systems at scale. Headquartered in Dallas, Texas, UNION is dedicated to restoring America's industrial strength and guaranteeing deterrence for the century ahead.
We recently emerged from stealth with $50M in funding led by top-tier venture investors and strategic partners. Read more in our Press Release
Key Responsibilities:
  • Develop and qualify robust industrial processes for defense-grade steel forgings, ensuring first article compliance with defense standards.
  • Perform first article inspections (FAI) and process validations to deliver battle-ready products.
  • Use CpK/PpK statistical analysis and tools (8D, 5-Why) to ensure process capability and stability.
  • Apply SPC and stats tools (Minitab, Excel, R-Shiny) to maintain tight process control.
  • Leverage expertise in metal processing, including heat treating and chemical coatings,
    to meet defense specifications.
  • Utilize Lean and Six Sigma methodologies to optimize processes and eliminate
    inefficiencies.
  • Partner with operations, quality, safety and engineering teams on short term and long term improvement efforts

Required Qualifications:
  • US Person - Must be a US Citizen or green card holder
  • Education: Bachelor's in Process Engineering, Industrial Engineering, Metallurgy,
    Materials Science, or Chemical Engineering.
  • Experience: 3-5+ years in process engineering; working in processes for defense, aerospace, or complex manufacturing/assembly; experience with first article inspections is a plus.
  • Technical Skills: CpK/PPK analysis, SPC, RCCA tools (8D, 5-Why), JMP and Python.
  • Work Style: Hands-on, on the floor problem solving, team support
  • Soft Skills: Strong communicator; proactive problem-solver, willing to learn and grow
  • Physical Requirements: Stand, walk, lift 50 lbs in a gritty shop with heat and noise.

Preferred Qualifications:
  • Defense standards knowledge (MIL-STD, ITAR).
  • Expertise in metal processing, including heat treating and chemical coatings for ferrous,
    non-ferrous, and super alloys.
  • Experience with non-destructive testing (NDT) methods (ultrasonic, dye penetrant) for
    process validation.
  • Six Sigma Black Belt or ASQ Certified Manufacturing Engineer (CMfgE).

Work Environment:
You'll fight on the shop floor in Dallas, with occasional office time and travel for process
validations or customer ops.

Apply