ZipRecruiter

Log In

2

Entry Level Non Destructive Testing Jobs in Dallas, TX

Adecco

NDT Level II Inspector

Fort Worth, TX

$25 - $30/hr

Perform non-destructive testing inspections using Fluorescent Penetrant (PT) and Magnetic Particle (MT) methods * Conduct routine equipment verification and calibration checks to ensure testing ...

victaulic

Quality Engineer

Justin, TX · On-site

$85K - $109K/yr

QUALITY ASSURANCE ENGINEER • Perform in-process inspections including dimensional verification, weld inspections and coating inspections; perform non-destructive testing (NDT) when required ...

Precision Aviation Group

NDT Inspector

Carrollton, TX · On-site

The Non-Destructive Testing (NDT) Inspector is responsible for performing inspections of aircraft components, assemblies, and materials using approved non-destructive testing methods to ensure ...

AtWork

Structural & Pipe Welders - Irving, TX

Irving, TX · On-site

$24 - $25/hr

Candidates must be able to pass a 6G pipe test and perform Destructive/Non-Destructive testing . Responsibilities: * Weld pipe and structural steel (1" to 48") to ASME, API, and 100% X-Ray code ...

AtWork

Hiring Pipe & Structural Welders

Irving, TX · On-site

$24 - $25/hr

Candidates must be able to pass a 6G pipe test and Destructive/Non-Destructive testing . Essential Skills & Responsibilities * Weld pipe and structural steel (1" to 48") to ASME , API , and 100 ...

AtWork

Now Hiring Pipe & Structural Welders

Arlington, TX · On-site

$24 - $25/hr

Candidates must be able to pass a 6G pipe test and Destructive/Non-Destructive testing . Essential Skills & Responsibilities * Weld pipe and structural steel (1" to 48") to ASME , API , and 100 ...

StandardAero

NDT Inspector

Dallas, TX

Performs all designated non-destructive testing inspection duties in accordance with StandardAero policies and procedures and provide reports/records, such as FRA 337's, that comply with all ...

StandardAero

NDT Inspector

Dallas, TX · On-site

Performs all designated non-destructive testing inspection duties in accordance with StandardAero policies and procedures and provide reports/records, such as FRA 337's, that comply with all ...

Signicast

NDT Technician

Hutchins, TX · On-site

Ensure conforming quality castings by conducting Non-Destructive Testing (NDT) using, but not limited to, the following methods: X-ray, Magnetic Particle Inspection (MPI), Fluorescent * Penetrant ...

Thompson Engineering

Certified Welding Inspector

Dallas, TX · On-site

$26 - $35.25/hr

... non-destructive testing (NDT) activities as required • Prepare daily field reports, inspection summaries, and supporting documentation • Travel to various job sites, including out-of-town and ...

Thompson Engineering

Certified Welding Inspector

Dallas, TX · On-site

$26 - $35.25/hr

... non-destructive testing (NDT) activities as required • Prepare daily field reports, inspection summaries, and supporting documentation • Travel to various job sites, including out-of-town and ...

Thompson Engineering

Certified Welding Inspector

Dallas, TX · On-site

$26 - $35.25/hr

... non-destructive testing (NDT) activities as required • Prepare daily field reports, inspection summaries, and supporting documentation • Travel to various job sites, including out-of-town and ...

Thompson Engineering

Certified Welding Inspector

Dallas, TX · On-site

$26 - $35.25/hr

... non-destructive testing (NDT) activities as required • Prepare daily field reports, inspection summaries, and supporting documentation • Travel to various job sites, including out-of-town and ...

next page

Showing results 1-20

All JobsNon Destructive Testing JobsEntry Level Non Destructive Testing JobsEntry Level Non Destructive Testing Jobs in Dallas, TX

Entry Level Non Destructive Testing information

See Dallas, TX salary details

$11

$33

$57

How much do entry level non destructive testing jobs pay per hour?

As of Jul 18, 2026, the average hourly pay for entry level non destructive testing in Dallas, TX is $33.18, according to ZipRecruiter salary data. Most workers in this role earn between $18.08 and $45.67 per hour, depending on experience, location, and employer.

What are entry level non destructive testing jobs?

Entry level non destructive testing (NDT) jobs involve using specialized techniques and equipment to inspect materials and structures for defects without causing damage. These roles are typically suitable for individuals who are new to the field and may include duties such as assisting certified technicians, preparing equipment, and learning how to interpret test results. Common methods used in NDT include ultrasonic, magnetic particle, liquid penetrant, and radiographic testing. Entry level technicians often work in industries such as aerospace, construction, manufacturing, and energy, and receive on-the-job training as they gain experience and certifications.

Is NDT hard to get into?

Entry level Non-Destructive Testing (NDT) jobs can be competitive, but they often require technical training, certifications such as ASNT Level I or II, and familiarity with testing methods like ultrasonic or radiographic testing. Gaining relevant skills and certifications can improve your chances of entering the field, which typically involves on-the-job training and safety protocols.

What jobs pay 4000 a week without a degree?

Entry level non-destructive testing (NDT) technicians can potentially earn around $4,000 per week with experience, certifications, and working in high-demand industries like oil and gas or aerospace. These roles often require specialized training, safety certifications, and the ability to work in challenging environments, but they do not typically require a college degree.

What is the difference between Entry Level Non Destructive Testing vs Entry Level Welding Inspector?

AspectEntry Level Non Destructive TestingEntry Level Welding Inspector
CertificationsLevel I or II certifications (e.g., ASNT)AWS Certified Welding Inspector (CWI) or equivalent
Work EnvironmentIndustrial, manufacturing, aerospace, oil & gasConstruction sites, manufacturing plants, fabrication shops
Industry UsageUsed across various industries for quality assurancePrimarily in welding and fabrication industries

Both roles require industry-specific certifications and involve quality inspection tasks. While Non Destructive Testing focuses on evaluating materials without damage, Welding Inspectors verify weld quality. Entry Level Non Destructive Testing and Entry Level Welding Inspector share similar work environments and industry applications, but their core responsibilities differ: testing vs. inspection of welds.

What are some typical daily tasks for an Entry Level Non Destructive Testing (NDT) technician?

As an Entry Level Non Destructive Testing technician, your daily tasks often include preparing and calibrating testing equipment, assisting with setting up inspections, and documenting results under the supervision of experienced NDT professionals. You may also be responsible for maintaining a clean and safe workspace, following detailed inspection procedures, and learning to interpret test data. Collaboration with senior technicians and engineers is common, as you’ll support them in ensuring that materials and structures meet safety and quality standards. Over time, you’ll gain hands-on experience with different NDT techniques such as ultrasonic, magnetic particle, or radiographic testing.

What are the key skills and qualifications needed to thrive as an Entry Level Non Destructive Testing (NDT) Technician, and why are they important?

To thrive as an Entry Level NDT Technician, you need a basic understanding of materials science, attention to detail, and a high school diploma or equivalent, with additional NDT-specific training or certifications like ASNT Level I or II being advantageous. Familiarity with common NDT equipment such as ultrasonic, radiographic, magnetic particle, and dye penetrant systems is important. Strong observational skills, effective communication, and a commitment to safety help technicians excel in identifying flaws and working within a team. These abilities are crucial for ensuring the integrity and reliability of materials or structures, which directly impacts safety and quality in industries like manufacturing and construction.

How to get into NDT with no experience?

Entry-level Non-Destructive Testing (NDT) positions often require a high school diploma or equivalent; gaining basic knowledge through online courses or technical programs can be helpful. Many employers provide on-the-job training and may require certification in methods like ultrasonic, radiographic, or magnetic particle testing after employment. Developing skills in inspection tools and safety procedures can improve chances of entry without prior experience.

How to begin a career in NDT?

To start a career in Non-Destructive Testing (NDT), obtain relevant training through technical schools or certification programs such as ASNT Level I or II. Gaining hands-on experience with testing methods like ultrasonic, radiographic, or magnetic particle testing, along with developing strong attention to detail and safety knowledge, is essential for entry-level positions.
What are the most commonly searched types of Non Destructive Testing jobs in Dallas, TX? The most popular types of Non Destructive Testing jobs in Dallas, TX are:
What cities near Dallas, TX are hiring for Entry Level Non Destructive Testing jobs? Cities near Dallas, TX with the most Entry Level Non Destructive Testing job openings:
Entry Level Non Destructive Testing jobs near you
Non-Destructive Testing (NDT) Inspector

Non-Destructive Testing (NDT) Inspector

TTL Inc

Dallas, TX • Remote

Full-time, Part-time

Medical, Dental, Vision, Retirement, PTO

Re-posted 20 days ago

Job description

Founded in 1964, TTL is an engineering design firm focused on delivering integrated infrastructure solutions for public and private clients. From site and corridor selection to due diligence, design, and construction services, TTL is a trusted partner providing single-sourced custom solutions for complex infrastructure development. With over 500 team members, TTL provides civil design, transportation design, surveying, geotechnical engineering, environmental consulting, CEI, and materials testing/inspection/observation services.

At TTL, we are driven to serve our clients, our communities, and each other. TTL not only provides a great work/life balance, but we provide excellent employee benefits such as a robust health & dental plan, vision, 401(k), flexible spending accounts, and generous paid time off (PTO) accrual.

For more information, please go to www.ttlusa.com.


Non-Destructive Testing (NDT) Inspector —Nashville, TN

TTL is seeking an NDT Inspector to join our team in Nashville, TN. From visual inspections of structural welds to structural steel and coating inspections, you’ll make sure these jobs are done right. In this role you will prepare daily reports and information for clients while maintaining that proper procedures, accurate computations, and cordial relationships are kept.

Build your Foundation. Build your Future. Build your Legacy.

Come to TTL.


What You'll Do

  • Performs visual inspections (VT) of structural welds to ensure that it conforms to applicable standards. AWS Certified Welding Inspector would be a plus but not required.
  • Performs nondestructive testing using Ultrasonic Testing (UT), Magnetic Particle Testing (MT) and Penetrant testing (PT) methods
  • Conducts coating inspections and testing to ensure that it compliance with applicable specifications and industry standards
  • Inspects structural steel and bolted connections with applicable codes
  • Follows proper procedures, performs accurate computations and documentation, and maintains cordial relationships with coworkers, clients, and contractors
  • Prepares daily inspection reports and communicates findings to clients in a timely and professional manner. Operates with moderate supervision while maintaining a high level of accuracy and attention to detail

Requirements

  • Minimum of a High School Diploma or equivalent
  • Proficient in reading of drawings, plans, and/or blueprints
  • Ability to communicate professionally orally and in writing
  • Basic computer skills and related technology
  • Must possess valid driver’s license and have good driving record. Drug-free workplace
  • Perform heavy lifting up to 50+ lbs
  • Ability to operate aerial lifts and work at heights.
  • Possess sufficient stamina to work in outdoor (hot & cold) environment
  • Current AWS CWI Certification preferred
  • Structural Steel experience required
  • ICC Structural Steel and Bolting Certification
  • Experience with observing Structural Steel bolting and welded connections
  • Understanding of Special Inspections, tracking what has been inspected, and tracking of items noted as discrepancies
  • Ability to explain and interpret code and/or quality control requirements


Job Type: Full-time

This position is subject to a pre-employment drug and motor vehicle record check

TTL is an EEO/AAP employer