ZipRecruiter

Log In

1

Monday Through Friday Injection Molding Process Engineer Jobs

Axjo Group

Injection Molding Process Technician

Fort Worth, TX · On-site

$24 - $28.75/hr

If needed, makes suggestions for improvement. • Working with the Process Engineer and Automation ... Requirements • 5 or more years of experience as a technician, with injection molding experience ...

Advanced Plastic Systems

Be Seen First

Process Engineer

Gahanna, OH · On-site

$90K - $130K/yr

Injection molding process engineer. responsible for start-ups and trouble shooting injection molding processes. Company Description visit us at www.advancedplasticsystems.com

Trenton Plastics, Inc.

Be Seen First

Injection Molding Process Technician

Trenton, TX · On-site

$56K - $70K/yr

Injection molding Processing Technician (Mold Tech) Full time position Pay based on experience ... engineered resins. Applicants ability to operate a variety of molding machines (Van Dorn/DeMag ...

Honor Plastics & Molding

Process Engineer

Pomona, CA

$85K/yr

The process engineer is responsible for maintaining daily production uptime of fully automated ... The process technician must have a good fundamental knowledge of the injection molding process, raw ...

Drive

Process Engineer

Charlotte, MI · On-site

$90K - $95K/yr

Develop, optimize, and maintain plastic injection molding processes to improve quality ... Support new product launches through APQP, mold trials, process validation, and PPAP submissions.

Cambro Manufacturing Co.

Be Seen First

Injection Molding Process Technician

Huntington Beach, CA · On-site

$27.53 - $34/hr

Injection Molding experience is required to perform this job. The Process Tech II takes full ... Works closely with the Sr. Tech Supervisor, the Engineering department, the Mold Shop, the ...

Techtrueup

Injection Molding Technician

Mebane, NC · On-site

$19 - $25.50/hr

Analyze process performance data and recommend improvements. * Work with Quality and Engineering ... injection molding process experience. * Experience with machine setup, mold changes, and process ...

LSI Staffing

Molding Technician

Grain Valley, MO

Senior Injection Molding Process Technician (Level III) Experienced Mold Setup & Process Technician ... How to Apply Apply directly through this posting. Or visit us during walk-in hours: Monday-Friday 9 ...

previous page

Showing results 41-60

All JobsMonday Through Friday Injection Molding Process Engineer Jobs

Monday Through Friday Injection Molding Process Engineer information

See salary details

$49.5K

$92K

$142.5K

How much do monday through friday injection molding process engineer jobs pay per year?

As of Aug 8, 2026, the average yearly pay for monday through friday injection molding process engineer in the United States is $92,018.00, according to ZipRecruiter salary data. Most workers in this role earn between $74,500.00 and $103,000.00 per year, depending on experience, location, and employer.

What is the difference between Monday Through Friday Injection Molding Process Engineer vs Shift Injection Molding Process Engineer?

AspectMonday Through Friday Injection Molding Process EngineerShift Injection Molding Process Engineer
Work ScheduleStandard weekday schedule, Monday to FridayIncludes evening, night, or weekend shifts
Certifications & SkillsSimilar certifications, such as Six Sigma or OSHA, requiredSame certifications, with additional shift-specific safety training
Work EnvironmentConsistent daytime plant environmentVaried shifts, potentially more dynamic environment
Industry UsageCommon in manufacturing plants with regular hoursUsed in facilities operating 24/7

The main difference lies in the work schedule. The Monday Through Friday Injection Molding Process Engineer works standard daytime hours, while the Shift Injection Molding Process Engineer covers non-day shifts. Both roles require similar skills and certifications, but shift roles may involve different safety protocols and work dynamics.

Is a Monday through Friday injection molding process engineer job a hard job?

A Monday through Friday injection molding process engineer role involves managing manufacturing processes, troubleshooting equipment, and ensuring product quality, which can be demanding due to the technical skills required. The job often requires attention to detail, problem-solving abilities, and knowledge of machinery and materials, but the schedule provides consistent working hours. Overall, it can be challenging depending on the complexity of the production environment and experience level.
What cities are hiring for Monday Through Friday Injection Molding Process Engineer jobs? Cities with the most Monday Through Friday Injection Molding Process Engineer job openings:
What are the most commonly searched types of Injection Molding Process Engineer jobs? The most popular types of Injection Molding Process Engineer jobs are:
What states have the most Monday Through Friday Injection Molding Process Engineer jobs? States with the most job openings for Monday Through Friday Injection Molding Process Engineer jobs include:
Monday Through Friday Injection Molding Process Engineer jobs near you

Injection Molding Process Technician

Axjo Group

Fort Worth, TX • On-site

$24 - $28.75/hr

Full-time

Re-posted 11 days ago

Job description

General
This position is considered critical to the business at Axjo America as injection molding machines and robots are primary components driving production. When not maintained properly, it drives unnecessary down time for the Injection Molding Department as well as impacting customer delivery commitments. This position will be accountable and responsible to support the expectation of having IMMs and robots ready for production and running in alignment with OEE Goals. High levels of attention to detail, and strict adherence to processes and root cause analysis are requirements.
• Working with Shift Lead and Production Supervisor, monitors completion of the weekly scheduled PM programs for the IMMs and Molds. If needed, makes suggestions for improvement.
• Working with the Process Engineer and Automation Engineer, access new robotic programs for the Robots. These new programs could be for new machines, molds, or to improve efficiencies within the program itself.
• Performs emergency maintenance procedures to molds, robots, and auxiliary equipment.
• Continuously identifies and executes ways to improve production output. This may include employee, machine, methods, and materials improvements. The goal will be to improve the errors and preventing defects from occurring.
• Uses root cause analysis tools and documents the findings when assessing problems/issues (molds, machines, robots).
• Works directly with the Mold PM Technician, Process Technician I and Process Engineer to perform mold set ups, repairs, and other needed functions.
• Gives recommendations and works with process engineering to set up machines according to specified parameters and production goals, cycle time improvements.
• Attends and participates in various meetings with employees and leadership as requested. Working with Process Engineer communicates/implements information from meetings.
• Ability to be certified in operating equipment necessary to complete tasks in production. This may include a variety of forklifts, man lifts, and other equipment.
• Works with PM Maintenance Technician and PM Mold Technician to ensure spare parts are maintained and ordered.
• Uses a variety of hand and power tools, electric meters.
• Adapt to job changes as needed, depending on workflow
Physical Demands/Requirements
• Must be able to stand, stoop, reach, grasp, sit or stand for long periods of time, and lift up to a maximum of 50 lbs. safely.
• Must be able to withstand excessive noise (with proper PPE) for extended periods of time; however, not on a regular basis.
• Must be willing and able to abide by all safety policies.
• Day or night shift; rotating 12-hour shifts, resulting in 36 hours one week, 48 hours the next week; every other weekend. Work is required on most holidays.
• Non-climate-controlled plant environment; standard hazards within a manufacturing plant where safety precautions and personal protective equipment must be maintained at all times.
Requirements
• 5 or more years of experience as a technician, with injection molding experience.
• Exposure to Scientific Molding technology a plus.
• Leadership, judgment and decision-making skills, time management, critical thinking.
• Working knowledge of robotics.
• Must have working knowledge of MS Office products including Outlook, Word & Excel. Preferred knowledge of Office 365 is best.
• High school diploma or equivalent; college level course work or associate degree in mechanical, electrical, or industrial maintenance preferred.
• Effective interpersonal communication skills.
• Strong math skills, mechanical and pneumatic aptitude.
• Basic hydraulics and electrical troubleshooting.
With reservation for changes and/or additional tasks that may be added.
Our companies Axjo America, Texas Role Production Locations Fort Worth Employment type Full-time

Apply