ZipRecruiter

Log In

1

Mold Inspection Jobs in Georgia (NOW HIRING)

Adler Pelzer Group

Tool and Die Maintenance

Thomson, GA · On-site

$27 - $30/hr

Communicate effectively with production team members, Team Leaders, Engineers, and Inspectors to ensure quality installation of molds * Troubleshoot issues with the molds * Perform preventative ...

Adler Pelzer USA

Tool and Die Maintenance

Thomson, GA · On-site

$27 - $30/hr

Communicate effectively with production team members, Team Leaders, Engineers, and Inspectors to ensure quality installation of molds * Troubleshoot issues with the molds * Perform preventative ...

HouseMaster

Home Inspector

Alpharetta, GA · On-site

May be required to enter homes that contain allergens such as pets, dust, mold, or other BENEFITS ... Our Mission Our comprehensive inspection solutions empower home buyers and sellers to make ...

Techniplas

Molding Operator

Dalton, GA

$14.50 - $17.25/hr

Measure and visually inspect products for surface and dimension defects using precision measuring instruments. * Maintain Techniplas and customer quality standards. * File, deburr, sand, grind, or ...

Techniplas

Molding Operator

Dalton, GA · On-site

$14.50 - $17.25/hr

Measure and visually inspect products for surface and dimension defects using precision measuring instruments. * Maintain Techniplas and customer quality standards. * File, deburr, sand, grind, or ...

Conflux Systems

CNC Machinist

Peachtree Corners, GA · On-site

$20 - $30/hr

Use precision measuring tools (calipers, micrometers, gauge blocks) for inspection * Build, repair, and modify jigs, fixtures, molds, and dies * Troubleshoot tooling issues and support production ...

Openwork

Technical Service Center Engineer

Smyrna, GA · On-site

... mold design reviews and provide feedback/suggestion to improve bottle quality. * Provide regular, complete, clear and organized project reports/daily routine reports. * Receive, inspect, and store ...

Ascend Staffing

Production - 1st Shift

Comer, GA · On-site

$15/hr

Molding & Layup: Perform wet layup, pre-preg layup, and resin infusion (VARTM) into molds for ... Carefully demold cured parts, inspect for structural integrity, and perform initial trimming using ...

Conflux Systems

CNC Machinist

Peachtree Corners, GA · On-site

$19.50 - $26.50/hr

Use precision measuring tools (calipers, micrometers, gauge blocks) for inspection * Build, repair, and modify jigs, fixtures, molds, and dies * Troubleshoot tooling issues and support production ...

Novolex

Set-Up Mechanic

Conyers, GA

$25.58 - $36.30/hr

... inspect molds Assist in documentation and record the history of the specific molds Skilled in using precision measurement and setup devices Identify modifications or upgrades to address downtime ...

ATS FAMILY

Environmental Specialist (57610)

Norcross, GA · On-site

$30 - $35/hr

Conduct asbestos, lead paint, mold, and indoor air quality (IAQ) inspections. * Perform air monitoring and work practice observations during asbestos, lead, and mold abatement activities. * Supervise ...

Ats Family

Environmental Specialist (57610)

Norcross, GA · On-site

$62 - $73/hr

Conduct asbestos, lead paint, mold, and indoor air quality (IAQ) inspections. * Perform air monitoring and work practice observations during asbestos, lead, and mold abatement activities. * Supervise ...

Ksb

Foundry Employee Level II

Thomson, GA · On-site

$15.75 - $20.25/hr

... local inspection, servicing, maintenance and repair services under the KSB SupremeServ brand ... Inspecting molds with a snake eye or mirror to ensure mold is read to receive molten metal

KSB SE and Co KGaA

Foundry Employee Level II

Thomson, GA · On-site

$15.75 - $20.25/hr

... local inspection, servicing, maintenance and repair services under the KSB SupremeServ brand ... Inspecting molds with a snake eye or mirror to ensure mold is read to receive molten metal

previous page

Showing results 41-60

All JobsMold Inspection JobsMold Inspection Jobs in Georgia

Mold Inspection information

See Georgia salary details

$13

$25

$32

How much do mold inspection jobs pay per hour?

As of Sep 5, 2026, the average hourly pay for mold inspection in Georgia is $25.52, according to ZipRecruiter salary data. Most workers in this role earn between $23.37 and $28.61 per hour, depending on experience, location, and employer.

What is a mold inspection?

A mold inspection job involves assessing homes or buildings for mold growth, identifying moisture sources, and determining potential health risks. Inspectors use specialized tools like moisture meters and air sampling devices to detect mold presence. They provide reports with findings and recommendations for remediation if necessary. Mold inspections help ensure a safe indoor environment by addressing mold issues before they become serious problems.

What does a mold inspector do?

A typical day for a Mold Inspector involves conducting on-site inspections at residential or commercial properties, collecting air and surface samples, and documenting findings with photographs and detailed reports. Inspectors often interact with property owners, facility managers, and remediation teams to explain results and recommend next steps. The role requires travel to different sites and the ability to adapt to various building environments, sometimes working in confined or damp spaces. You'll also spend part of your day in the office analyzing data, writing inspection reports, and maintaining certification records for regulatory compliance.

What skills and qualifications are needed to thrive as a mold inspector?

To thrive as a Mold Inspector, a thorough understanding of building science, environmental health, and microbial growth is essential, typically supported by certifications such as Certified Mold Inspector (CMI) or IICRC Mold Remediation (AMRT). Familiarity with moisture meters, air sampling pumps, thermal imaging cameras, and environmental testing procedures is highly valuable. Strong attention to detail, effective communication, and problem-solving abilities are important soft skills that help inspectors accurately identify issues and convey findings to clients. These skills and qualifications ensure accurate assessments, regulatory compliance, and the ability to guide remediation efforts effectively.

How do I become a mold inspector?

To become a mold inspector, you typically need to complete a training course approved by a relevant certification organization, gain knowledge of mold identification and sampling techniques, and obtain certification such as the Certified Mold Inspector (CMI) or similar credentials. Some states or employers may require specific licensing or additional training. Practical experience and familiarity with testing tools like moisture meters and air sampling equipment are also beneficial.

How much do mold inspectors make?

Mold inspectors in Florida typically earn between $40,000 and $60,000 annually, depending on experience, certifications, and the complexity of inspections. Entry-level inspectors may start at lower wages, while experienced professionals with advanced certifications can earn higher salaries. The job often requires knowledge of mold detection tools and environmental health standards.

What are popular job titles related to Mold Inspection jobs in Georgia?

For Mold Inspection jobs in Georgia, the most frequently searched job titles are:

What job categories do people searching Mold Inspection jobs in Georgia look for?

The top searched job categories for Mold Inspection jobs in Georgia are:

Mold Inspection jobs near you
Infographic showing various Mold Inspection job openings in Georgia as of August 2026, with employment types broken down into 84% Full Time, 11% Part Time, 3% Contract, and 2% Nights. Highlights an 96% Physical, 1% Hybrid, and 3% Remote job distribution, with an average salary of $53,075 per year, or $25.5 per hour.

Tool and Die Maintenance

Adler Pelzer Group

Thomson, GA • On-site

$27 - $30/hr

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Re-posted 18 days ago

Job description

Are you looking for an opportunity to make a major impact in the manufacturing world and be part of a passionate team? 

Adler Pelzer Group - a growing Tier One supplier of Acoustic and Soft Trim products to the automotive industry is seeking a safety driven Tool and Die Technician for the manufacturing operations in Thomson, GA. The Tool and Dye Maintenance Technician will be responsible for maintaining, repairing, and improving tooling and dies used in the manufacturing process. This position is essential to the success of daily operations and keeping equipment running. This opportunity comes with the opportunity for the incumbent to showcase their skillset and be rewarded for their contributions.

Responsibilities of the Tool & Die Maintenance Technician: 

  • Perform daily shop inspections and preventative maintenance
  • Exposure to metal fabrication, welding (stick, MIG & TIG)
  • Ability to weld aluminum and steel
  • Performs all tasks in a safe manner
  • Comply with safety rules and company policies
  • Set-Up and get molds ready to ensure consistent quality, output, and yield
  • Complete daily mold change sheets and other required paperwork
  • Complete/participate in any and all PPS activities as directed by Supervisors
  • Communicate effectively with production team members, Team Leaders, Engineers, and Inspectors to ensure quality installation of molds
  • Troubleshoot issues with the molds
  • Perform preventative maintenance on injection mold tooling and prior to mold changes
  • Troubleshoot any problems involved with mold changes
  • Remove and install Hot Runner Service
  • Support Engineers with tool design reviews on new builds
  • Ability to determine feasibilities of engineering change during design reviews
  • 3-5 Years of Tool and Die troubleshooting experience required.
  • Must have experience with set-up and operation of milling machines, grinders, saws, lathes and other tool room equipment. 
  • Must be able to perform calculations such as proportions, percentages, area, circumference, and volume.
  • Candidates must be able to read blueprints, create sketches for engineering, and fabricate machines components from drawing and samples. 
  • Plastics mold repair is a PLUS to have.
  • Basic Tig welding experience.
  • Occasional overtime will be required.

Salary and Benefits: Adler Pelzer offers a competitive pay and benefits package as well as the opportunity to grow one’s career.

Salary range for this position is $27-$30+/hour. Specific salary is commensurate with experience and factors such as relevant experience, education, certifications and licenses, skills, and training.

Benefits include: medical, dental, vision, other insurance options, paid time off, 401(K) match, life insurance, short term and long term disability insurance, employee assistance program, variety of automobile purchase discounts (BMW, Ford, GM, Subaru-many others), and tuition reimbursement.

We are an equal opportunity employer. APG participates in the E-Verify Program.

To learn more about our Company and our rich history, visit our website at www.AdlerPelzer.com

NO UNAUTHORIZED REFERRALS FROM RECRUITERS OR VENDORS.

Apply