ZipRecruiter

Log In

1

Metrology Manager Jobs in Madison, WI (NOW HIRING)

SAELENS CORPORATION

Quality Engineer

Johnson Creek, WI · On-site

$72K - $93K/yr

Metrology & Tools: Operate and calibrate precision tools such as calipers, micrometers, bore gauges ... Non-Conformance Management: Identify, document, and quarantine non-conforming (defective) material ...

Ametek

Lead, Strategic Growth Initiatives

Madison, WI · On-site

Structure and manage partnerships including partnerships (joint developments, technology access, co ... CAMECA is a world leading supplier of microanalytical and metrology instrumentation for research ...

Cummins

Quality Technician (Romer)-1st Shift

Mineral Point, WI · On-site

$18 - $24.25/hr

... metrology. * Quality Process Management : Apply quality tools and methods (e.g., APQP, FMEA, PPAP, SPC, Capability studies, Process Audit, inspection, test) proficiently to ensure the quality of ...

Cummins

Quality Technician (Romer)-1st Shift

Mineral Point, WI · On-site

$18 - $24.25/hr

... metrology. * Quality Process Management : Apply quality tools and methods (e.g., APQP, FMEA, PPAP, SPC, Capability studies, Process Audit, inspection, test) proficiently to ensure the quality of ...

Cummins

Quality Technician (Romer)-1st Shift

Mineral Point, WI · On-site

$18 - $24.25/hr

... metrology. * Quality Process Management : Apply quality tools and methods (e.g., APQP, FMEA, PPAP, SPC, Capability studies, Process Audit, inspection, test) proficiently to ensure the quality of ...

Cummins

Quality Technician (Romer)-1st Shift

Mineral Point, WI · On-site

$18 - $24.25/hr

... metrology. * Quality Process Management : Apply quality tools and methods (e.g., APQP, FMEA, PPAP, SPC, Capability studies, Process Audit, inspection, test) proficiently to ensure the quality of ...

Cummins

Quality Technician (Romer)-1st Shift

Mineral Point, WI · On-site

$18 - $24.25/hr

... metrology. * Quality Process Management : Apply quality tools and methods (e.g., APQP, FMEA, PPAP, SPC, Capability studies, Process Audit, inspection, test) proficiently to ensure the quality of ...

Cummins

Quality Technician (Romer)-1st Shift

Mineral Point, WI · On-site

$18 - $24.25/hr

... metrology. * Quality Process Management : Apply quality tools and methods (e.g., APQP, FMEA, PPAP, SPC, Capability studies, Process Audit, inspection, test) proficiently to ensure the quality of ...

Cummins

Quality Technician (Romer)-1st Shift

Mineral Point, WI · On-site

$18 - $24.25/hr

... metrology. * Quality Process Management : Apply quality tools and methods (e.g., APQP, FMEA, PPAP, SPC, Capability studies, Process Audit, inspection, test) proficiently to ensure the quality of ...

Cummins

Quality Technician (Romer)-1st Shift

Mineral Point, WI · On-site

$18 - $24.25/hr

... metrology. * Quality Process Management : Apply quality tools and methods (e.g., APQP, FMEA, PPAP, SPC, Capability studies, Process Audit, inspection, test) proficiently to ensure the quality of ...

Cummins

Quality Technician (Romer)-1st Shift

Mineral Point, WI · On-site

$18 - $24.25/hr

... metrology. * Quality Process Management : Apply quality tools and methods (e.g., APQP, FMEA, PPAP, SPC, Capability studies, Process Audit, inspection, test) proficiently to ensure the quality of ...

Cummins

Quality Technician (Romer)-1st Shift

Mineral Point, WI · On-site

$18 - $24.25/hr

... metrology. * Quality Process Management : Apply quality tools and methods (e.g., APQP, FMEA, PPAP, SPC, Capability studies, Process Audit, inspection, test) proficiently to ensure the quality of ...

Cummins

Quality Technician (Romer)-1st Shift

Mineral Point, WI · On-site

$18 - $24.25/hr

... metrology. * Quality Process Management : Apply quality tools and methods (e.g., APQP, FMEA, PPAP, SPC, Capability studies, Process Audit, inspection, test) proficiently to ensure the quality of ...

previous pagenext page

Showing results 21-40

All JobsMetrology JobsMetrology Manager JobsMetrology Manager Jobs in Madison, WI

Metrology Manager information

See Madison, WI salary details

$37.3K

$96.2K

$173.8K

How much do metrology manager jobs pay per year?

As of Sep 4, 2026, the average yearly pay for metrology manager in Madison, WI is $96,206.00, according to ZipRecruiter salary data. Most workers in this role earn between $77,100.00 and $110,900.00 per year, depending on experience, location, and employer.

What does a metrology manager do?

A Metrology Manager oversees the calibration, testing, and maintenance of measurement instruments to ensure accuracy and compliance with industry standards. They develop and implement metrology procedures, manage a team of technicians, and ensure regulatory requirements are met. Additionally, they analyze measurement data, troubleshoot equipment issues, and support continuous improvement initiatives to enhance quality and efficiency.

What are the key skills and qualifications needed to thrive as a metrology manager?

To thrive as a Metrology Manager, you need a solid background in precision measurement, calibration techniques, and quality management, typically supported by a degree in engineering or a related field. Familiarity with metrology software, calibration equipment, ISO/IEC 17025 standards, and relevant certifications such as CCT (Certified Calibration Technician) are essential. Strong leadership, problem-solving abilities, and effective communication skills set outstanding candidates apart. These capabilities ensure accurate measurement systems, regulatory compliance, and successful team management within quality-driven manufacturing or laboratory environments.

What are some typical challenges faced by metrology managers, and how are they addressed in the workplace?

Metrology Managers often face challenges such as maintaining calibration schedules, ensuring compliance with evolving standards, and integrating new measurement technologies into existing workflows. These challenges are typically addressed through regular training, investment in up-to-date metrology equipment, and close collaboration with engineering, manufacturing, and quality teams. Managers also implement robust documentation systems and continuous improvement practices to uphold accuracy and regulatory requirements. This creates a dynamic, collaborative work environment where adaptability and proactive problem-solving are highly valued.

What job categories do people searching Metrology Manager jobs in Madison, WI look for?

The top searched job categories for Metrology Manager jobs in Madison, WI are:

What cities near Madison, WI are hiring for Metrology Manager jobs?

Cities near Madison, WI with the most Metrology Manager job openings:

Metrology Manager jobs near you
Infographic showing various Metrology Manager job openings in Madison, WI as of August 2026, with employment types broken down into 94% Full Time, and 6% Nights. Highlights an 100% In-person job distribution, with an average salary of $96,206 per year, or $46.3 per hour.

Quality Engineer

SAELENS CORPORATION

Johnson Creek, WI • On-site

$72K - $93K/yr

Full-time

Posted 6 days ago

Job description

Description:

Quality Engineer

Location: Johnson Creek, WI 

Employment Type: 1st shift, 6:00am to 2:30pm Monday through Friday.  Flexible, plus some weekends as needed.  

Authorization: Applicants must be authorized to work in the U.S. without sponsorship.


Ask us about our $5000 sign on bonus!


Key Responsibilities

  • Inspection & Testing: Conduct first-piece, in-process, and final inspections on machined parts using precision measuring instruments.
  • Metrology & Tools: Operate and calibrate precision tools such as calipers, micrometers, bore gauges, optical compactors, and Coordinate Measuring Machines (CMM).
  • Blueprint Reading & GD&T: Interpret complex engineering drawings and blueprints, including Geometric Dimension and Tolerating (GD&T).
  • Documentation & Reporting: Maintain detailed inspection records, compile, and submit quality documentation, such as First Article Inspection (FAI) reports and PPAP packages.
  • Non-Conformance Management: Identify, document, and quarantine non-conforming (defective) material, participating in Material Review Board (MRB)      efforts.
  • Process Improvement: Assist engineers in Root Cause Analysis (RCA) and      Corrective and Preventive Actions (CAPA) to reduce defects.
  • Shop Floor Support: Collaborate with machinists to resolve quality issues and ensure compliance with Standard Operating Procedures (SOPs). 


Working Conditions

  • Typically on-site in a machine shop environment, requiring frequent time on the      production floor.
  • Must be able to stand for long periods, walk, and lift up to 30–50 lbs.
  • Requires wearing personal protective equipment (PPE) such as safety glasses and      steel-toed shoes. 
Requirements:

Qualifications

Required Education & Experience

  • Education: High School Diploma or GED required. An Associate degree in a technical field (machine tool technology, engineering technology, or quality assurance) is highly preferred.
  • Experience: 1–3+ years of experience in quality control or inspection within a metal machining or manufacturing environment.
  • Technical Skills: Proficiency in interpreting blueprints and GD&T. 

Preferred Skills & Certifications

  • CMM Experience: Experience with CMM programming (e.g., Zeiss, Keyence, Mitutoyo).
  • Software: Proficiency in MS Office (especially Excel for data analysis) and quality management software.
  • Machining Experience: 1-3+ years working on / with CNC machines, Robotic cells
  • Knowledge: Understanding of ISO 9001:2015, IATF 16949, and Statistical Process Control (SPC). AIAG  or other Experience in APQP and PPAPs, Gage R&R & Capability testing. 
  • Mechanically Inclined: Applicant has strong mechanical understanding of parts and assembly including the ability to assess, disassemble and reassemble precision instruments. 

Key Competencies

  • Attention to Detail: Ability to detect minor defects or slight deviations from specifications.
  • Problem-Solving: Strong analytical skills to determine the root cause of defects.
  • Communication: Ability  to clearly communicate technical issues to production staff and management.